Converting a gas stove to induction typically costs $1,200-$6,500, including the new range, gas disconnection, and any electrical work. The biggest price difference is whether the kitchen already has a suitable 240-volt circuit; appliance size, panel capacity, and local labor rates also matter.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Complete conversion | $1,200 | $3,000 | $6,500 | Range, gas work, installation, and typical electrical needs |
| Induction range | $900 | $1,800 | $4,000 | Common 30-inch models; premium models cost more |
| Electrical work | $0 | $900 | $3,500 | Existing circuit through panel or circuit upgrades |
What a 30-inch induction range conversion usually costs
For a standard 30-inch range in a home with a usable 240-volt outlet, expect about $1,200-$2,500 total. That estimate generally covers a $900-$1,800 appliance, $150-$350 for installation and gas-line work, and modest delivery or removal charges. A higher-end range or extra electrical work can push the total above $3,000.
When a new circuit must be run, many projects land around $2,000-$4,500. Homes needing panel work, long wiring runs, or wall repairs can reach $6,500 or more. Assumptions: U.S. pricing for a standard 30-inch range, normal access, and licensed trade work; regional quotes vary. The existing electrical setup is usually the strongest predictor of the final bill.
Which appliance, wiring, and gas-line charges appear on quotes
Ask for the appliance and each trade task to be listed separately. This makes it easier to see whether the quote includes a dedicated circuit, gas-line capping, delivery, and removal rather than treating them as unspecified installation fees.
| Quote item | Typical price | Basis | What can raise it |
|---|---|---|---|
| Induction range | $900-$4,000 | 30-inch unit | Premium features, brand, or slide-in design |
| Basic installation | $100-$300 | Existing outlet and standard fit | Fit adjustments or separate contractor visit |
| New 240-volt circuit | $500-$2,000 | Typical accessible route | Long run, finished walls, or difficult access |
| Gas disconnection and cap | $100-$300 | Accessible shutoff and line | Corroded valve or line changes |
| Panel work | $1,500-$4,000 | Upgrade when capacity is inadequate | Service, grounding, or code corrections |
| Delivery and haul-away | $50-$250 | One appliance | Stairs, distance, or special disposal |
Electrical and panel charges should be itemized because they can outweigh the gas-disconnection fee.
How circuit capacity and wire distance change the estimate
Many full-size induction ranges require a dedicated 240-volt circuit, commonly rated around 40-50 amps; the appliance nameplate and manufacturer instructions determine the actual requirement. A properly rated existing circuit can avoid a new wiring charge, but an old or undersized circuit may not be suitable even if an outlet is present.
A short, accessible wire run can fall near the lower end of the new-circuit range. Runs of 50 feet or more, finished ceilings, masonry, or a route between floors can add several hundred dollars or more. If the electrical panel has no capacity for the required breaker, an electrician may recommend a subpanel or service upgrade. Electrician rates often run about $75-$150 per hour, with minimum visit charges possible. Confirm circuit amperage and panel capacity before ordering the range.
Why panel limits and kitchen access can push costs higher
Panel capacity, distance from the panel, and access to the wiring route are the main electrical variables. A straightforward circuit installation may take several hours; difficult routing or panel replacement can turn the job into a full-day project or require a separate inspection visit. Urban labor rates may be 10%-25% above a national baseline, while some rural areas have fewer available electricians and higher travel charges.
Local code requirements differ, and permits may be needed for new circuits or panel changes. A permit and inspection can add roughly $50-$300, depending on the jurisdiction and scope. Have the electrician verify code and permit requirements before comparing final quotes.
Three realistic conversion quotes for different kitchens
Existing circuit: A $1,300 induction range, $200 installation, $150 gas cap, and $100 haul-away total about $1,750. This assumes the outlet and circuit meet the range specifications.
New circuit, accessible route: A $1,700 range, $250 installation and gas work, a 6-hour circuit job at $110 per hour, and $150 delivery and removal total about $2,760. Permit charges or wall repairs may be extra.
Panel upgrade and longer run: A $2,400 range, $350 installation and gas work, $1,800 for a panel upgrade, $1,200 for new wiring, and $200 delivery and removal total about $5,950. This represents a more involved project, not a typical simple swap.
Gas capping, old-range removal, and delivery fees
Gas work is usually a modest part of the budget when the shutoff valve is accessible and in good condition. Capping the line at the appliance connection may cost less than altering or relocating the gas pipe. Buyers should not assume appliance delivery includes gas disconnection, electrical hookup, or removal of the old range; these services are often priced separately.
Removal commonly costs $25-$150, while delivery can be free or reach $100-$150 depending on retailer and access. Stairs, a narrow doorway, or a long carry from the truck can add fees. Check the delivery terms and gas-work scope so the same service is not omitted or charged twice.
When keeping a gas stove or choosing a lower-priced range saves money
If a suitable 240-volt circuit is absent and electrical work is extensive, keeping the existing stove can cost less in the short term. Another option is a basic induction range rather than a premium model; savings of $1,000-$2,000 are possible when comparing entry-level and high-end units. A portable induction burner costs far less, but it does not replace a full range or provide oven capacity.
Get separate estimates for circuit installation and panel work before deciding. Avoid paying for a panel upgrade until an electrician confirms that a dedicated circuit cannot be added safely within the existing service capacity. Choosing a standard-width model and limiting unnecessary electrical or cabinetry changes keeps the conversion scope manageable.
How to lower the conversion price before booking electricians
Ask an electrician to inspect the panel, existing outlet, and proposed wire route before the appliance is delivered. Share the range’s installation specifications so the contractor can quote the correct breaker and circuit instead of pricing a guess. Request at least two itemized bids with labor, permit, gas capping, and cleanup shown separately.
Schedule delivery and installation together when the retailer offers a reasonable bundled rate, and confirm whether the installer is licensed for the required electrical and gas work. Measure the opening and doorway to avoid return or modification charges. The most reliable savings come from verifying the existing circuit and comparing complete, itemized quotes.