Double French doors price depends on size, material, glazing, and finish. This guide outlines typical costs in USD, with low, average, and high ranges tied to common project specs. Buyers can expect the main drivers to be door width, panel count, hardware quality, and installation complexity.
Estimated total costs usually fall within the ranges shown below, with per-unit pricing applied for standard door heights and widths.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Double French door pair (ready-to-install) | $1,200 | $2,000 | $4,000 | Standard 72″ tall, 60″ wide pair; prehung units |
| Labor to install doors | $600 | $1,400 | $3,000 | Includes frame prep and sealing |
| Glass upgrade (low-E, impact, tint) | $150 | $350 | $900 | Per door; varies by glass type |
| Hardware upgrade (levers, locks, hinges) | $60 | $150 | $350 | Quality finishes; heavy-duty hardware adds value |
| Framing and trim finish | $40 | $120 | $350 | Inside and outside trim options |
| Permits/inspections | $0 | $100 | $500 | Depends on local code |
Base price for a double French door pair in typical sizes
For a standard 72-inch tall door with two 30-inch leaves, material choices commonly fall within $1,200-$2,000 for the doors themselves. A mid-range factory finish with clear glass and standard hardware usually sits near the $1,600 mark. Expect higher costs for larger widths, custom finishes, or specialty glass.
Cost components that shape the quote
Pricing splits into four to six key parts. Materials, Labor, Glass Upgrades, Hardware, Framing/Trim, and Permits influence the final number. The table below shows typical ranges by component for standard exterior double French doors in the U.S.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (door slabs, frames) | $600 | $1,000 | $2,200 | |
| Labor to install | $600 | $1,400 | $3,000 | |
| Glass (standard vs upgrade) | $100 | $320 | $900 | |
| Hardware | $60 | $150 | $350 | |
| Framing/trim finish | $40 | $120 | $350 | |
| Permits/inspections | $0 | $100 | $500 |
Key variables that swing the final price
Several measurable drivers frequently shift cost at the estimate stage. Door width and height, glass type, and frame material are the top three. For example, expanding to a 72″ x 80″ unit or choosing impact-rated glass adds 20-40% to the door modules. A premium aluminum frame with thermal breaks can add a few hundred dollars vs. basic wood or fiberglass.
Regional price variations within the United States
Costs for double French doors vary by market. In the Southeast or Midwest, installation labor tends to be lower than in coastal urban regions. Region, local labor rates, and delivery accessibility drive price deltas.
Typical regional deltas might place average door kits at $1,500 in less-dense markets versus $2,200 in high-demand metro areas when all components are included.
Labor time and installation specifics by door size
Labor estimates scale with width, height, and site access. For standard exterior doors, install time often ranges from 6 to 12 hours for two doors. A typical crew includes two installers. Per-door labor rates often run $75-$125 per hour depending on region and experience. Labor cost can dominate the total when finish work or custom trim is needed.
Choosing glass and finishes: impact on price
Standard clear glass is the most economical option. Upgrades like Low-E, laminated, or impact-rated glass increase costs. Heavier glass or decorative options frequently add $150-$600 per door. Finish options (painted, stained, or veneer) influence both material and labor time.
Smart features and hardware supplements
Optional smart-locks, motorized door closer, or integrated smart sensors add cost but improve convenience and energy performance. A basic mechanical lock set starts around $60-$150; premium hardware or automated components can push per-door costs higher by $200-$600.
Ways to reduce price without sacrificing safety
Smart budgeting moves include selecting standard sizes, leveraging stock finishes, and bundling replacement of surrounding trim with doors. Ask for a price quote that separates materials from installation to compare apples-to-apples. Consider removing nonessential upgrades or delaying delivery until regional price dips occur.
Three example quotes to set expectations
Realistic scenarios help buyers compare bids. The table below shows three example quotes for a standard 72″ tall, 60″ wide double French door pair in differing markets.
| Scenario | Door Type | Materials | Labor | Glass | Hardware | Permits | Total |
|---|---|---|---|---|---|---|---|
| Low-cost regional market | Fiberglass, clear glass | $900 | $700 | $150 | $60 | $0 | $1,810 |
| Average urban market | Fiberglass with Low-E | $1,100 | $1,200 | $250 | $120 | $100 | $2,770 |
| Premium coastal market | Aluminum with laminated glass | $2,000 | $1,800 | $600 | $350 | $500 | $5,250 |
Assumptions: standard 72″ door height, 60″ width pair, normal access, mid-range finish.
Maintenance and ownership costs to consider over time
Beyond initial installation, plan for ongoing expenses. Door systems may require periodic hinge lubrication, weatherstripping replacement, and occasional glazing resealment. A small annual upkeep budget (roughly 1-2% of initial door cost) helps maintain performance and comfort. Energy savings from proper glazing and weather sealing can offset some upfront expenses over time.