Fascia board replacement typically costs $6-$20 per linear foot installed, or about $900-$3,000 for a common 150- to 250-foot project. The cost of fascia board work depends mainly on material, damaged roof-edge wood, gutter removal, roof height, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed fascia, per linear foot | $6 | $12 | $20 | Standard replacement, including labor |
| 150-foot project | $900 | $1,800 | $3,000 | Before major rot or gutter repairs |
| Material only, per linear foot | $1 | $4 | $9 | Wood, composite, or PVC; finish varies |
| Aluminum fascia wrap, per linear foot | $5 | $9 | $15 | Often installed over sound wood |
Assumptions: U.S. pricing for standard residential access, ordinary roof-edge dimensions, and no extensive structural repairs.
Fascia Board Replacement Prices by Home Size
For a typical single-story home with 150-200 linear feet of fascia, a straightforward replacement often totals $900-$2,400. A larger home with 250-350 feet may cost $1,500-$5,250, especially if it has multiple rooflines, upper stories, or difficult access. Contractors commonly quote by linear foot, but may use a minimum charge for small repairs.
A practical planning figure is about $12 per linear foot installed for standard materials and uncomplicated access. The estimate usually covers removal of the old board, installation, and basic fastening; painting, gutter work, and widespread rot may be extra. Assumptions: standard wood or primed composite fascia, average regional labor, and replacement rather than a full roof-edge rebuild.
What Makes Up a Fascia Installation Quote?
Materials are only part of the bill. Labor and access can account for a substantial share, and removal or disposal may be listed separately. The table shows common charges for a 150-foot job; items may be included in a contractor’s per-foot quote rather than billed individually.
| Quote component | Typical rate | 150-foot estimate | What changes the charge |
|---|---|---|---|
| Fascia materials | $1-$9 per linear foot | $150-$1,350 | Wood species, PVC, composite, or metal |
| Installation labor | $4-$11 per linear foot | $600-$1,650 | Height, cuts, access, and fastening |
| Removal and disposal | $1-$4 per linear foot | $150-$600 | Old-board condition and haul-away needs |
| Paint or finish | $1-$4 per linear foot | $150-$600 | Priming, coats, and color matching |
| Gutter handling | $2-$6 per linear foot | $300-$900 | Detaching and reinstalling existing gutters |
Ask whether removal, finishing, and gutter handling are included before comparing per-foot quotes. Labor example: 10-20 crew-hours at an effective $50-$100 per hour equals roughly $500-$2,000 before materials and disposal.
How Board Length, Material, and Roof Access Change Price
Material choice changes both purchase price and finishing needs. Untreated or primed wood can cost $1-$5 per linear foot; PVC and composite commonly run $3-$9; aluminum coil or prefinished metal products may cost $4-$10 before installation. A basic painted wood board can be economical, while vinyl or composite can reduce routine painting but may have a higher upfront price.
Roof height and existing damage can outweigh the difference between low- and mid-priced boards. Second-story edges may add 15%-35% for ladder, lift, or safety demands. If more than 10-15% of the roof edge needs replacement, or the fascia is attached to damaged rafter tails, the work may shift from a simple board swap to carpentry repairs.
Board size also matters: a standard 1-by-6 is generally less expensive than a 1-by-10 or custom profile. Long, straight runs are faster to install than short sections around dormers, corners, and returns. Assumptions: added percentages are planning ranges and vary with contractor access equipment and site layout.
Can Painting or Aluminum Wrap Lower Long-Term Expense?
Painting replacement wood typically adds $1-$4 per linear foot, but it provides a finished, protected surface and may be necessary for bare or primed boards. Aluminum wrap often costs $5-$15 per linear foot installed when the underlying wood is sound. Wrapping can reduce repainting, but it does not correct rot beneath the metal.
Replace soft or moisture-damaged wood before considering a cover-up. For a short, dry section, painted wood may cost less initially; for long, exposed runs, prefinished metal or wrapping may reduce upkeep. The right comparison is the full installed quote, including substrate repairs, corner details, and finish—not just the board price.
How Long Does a Fascia Crew Need?
A crew can often replace 100-200 feet in one day when the roof edge is accessible and the boards are sound. A 250-350-foot project, a two-story house, or numerous corners may require one to three days. Painting can add time for preparation and drying, while rain or cold weather may delay exterior finishing.
Labor hours rise quickly when gutters must be removed or roof-edge wood needs repair. A quote should state whether the crew is replacing fascia only, treating or replacing adjoining wood, and reinstalling gutters. For small jobs, a service minimum of about $250-$600 can make the per-foot rate appear higher than on a full-home project.
When Rot, Gutters, and Disposal Add to the Bill
Hidden damage is a common reason the final price exceeds an initial fascia estimate. Replacing short sections of rafter tail or roof-edge framing may add $150-$600 per affected area, while more extensive carpentry can add $500-$2,000 or more. Gutter removal and reinstallation may be charged at $2-$6 per linear foot, and old-material disposal can add $100-$400 depending on volume and local fees.
Have the contractor separate fascia, framing, gutter, and disposal charges on the estimate. That makes it easier to approve necessary repairs without treating optional painting or gutter upgrades as part of the required work. Photos of exposed damage and a written change order help clarify added charges.
Why Fascia Prices Shift Across U.S. Regions
Labor and disposal rates vary by market. As a broad planning comparison, urban and high-cost coastal areas may run 15%-30% above the national middle, while some rural markets may come in 10%-20% below it. These are not fixed regional tariffs: travel distance, contractor availability, local code requirements, and roof access can change a particular quote more than geography alone.
Compare estimates for the same footage, material, finish, and gutter scope. Two bids are not directly comparable if one includes priming and debris removal while the other excludes them. A local quote should also identify whether sales tax applies to materials or labor in that jurisdiction.
Where Homeowners Can Trim a Fascia Board Quote
Measure the affected roof edge and ask for separate pricing for damaged sections versus full replacement. Keeping sound boards can reduce material and labor, but patching is a poor saving if the remaining wood is soft or the paint is failing throughout. Scheduling fascia work with gutter replacement or soffit repairs may avoid paying for separate setup and access.
Choose material based on exposure and maintenance needs, not upfront price alone. Standard profiles and readily available lengths usually cost less than custom trim. Clear shrubs, move patio items, and provide safe access where possible; avoid doing roof-edge demolition without suitable fall protection. Request two or three itemized quotes and verify that each covers the same linear footage, removal, finish, and disposal.