Homebuyers typically pay a combined cost for framing and installing an interior door that includes rough opening framing, door jambs, trim, and hardware. The price is driven by door type, size, frame complexity, labor rates, and regional demand. This guide presents realistic cost ranges in USD to help plan a project budget and compare quotes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Framing and doorway prep | $150 | $350 | $700 | Includes studs, shims, and opening adjustment |
| Door slab or unit price (standard 80 in, hollow core) | $70 | $150 | $350 | Material choice affects cost |
| Hardware (hinges, knob, latch) | $40 | $90 | $180 | Depends on finish and quality |
| Rough opening framing labor | $120 | $250 | $520 | Includes insulation and shimming |
| Finishing trim and casing | $60 | $140 | $320 | Basic to premium profiles |
| Paint or stain (optional) | $20 | $60 | $120 | Labor and materials |
| Permits or inspections | $0 | $50 | $200 | Varies by locality |
What Homeowners Typically Pay to Frame and Install an Interior Door
Prices usually range from $350 to $1,000 per door installed when considering framing, the door unit, hardware, and finishing. For a standard hollow-core door in a typical single-family home, expect $450-$700 total, including rough opening framing, hinges, and trim. If the project involves solid-core or fire-rated doors, or unusual rough opening work, totals commonly run $600-$1,200. Assumptions: standard 80-inch interior door, conventional jamb, no custom carpentry beyond framing, regional labor rates apply.
Major Cost Components in Interior Door Framing and Installation
| Materials | Labor | Hardware | Framing/Opening Prep | Finishing | Permits |
|---|---|---|---|---|---|
| $70-$350 (door slab) | $120-$520 | $40-$180 | $150-$700 | $20-$120 | $0-$200 |
Assumptions: hollow-core vs solid-core door, regional labor rates, standard jamb width.
Key Variables That Drive the Interior Door Price
Two influential drivers are door type and rough opening complexity. A hollow-core door with a standard 6’8″ height and a simple jamb will trend lower, while a solid-core or fire-rated model with custom casing or nonstandard jambs raises price. Rough opening width beyond 36 inches or an angled or nonplumb wall can add labor hours and materials. Another threshold is labor rate by region; metropolitan areas can be 15-25% higher than rural markets.
Ways to Reduce the Interior Door Framing and Installation Cost
Control scope by choosing a standard doorway size, reuse existing casing if possible, and select economical hardware. Scheduling during non-peak seasons can trim labor charges. Prefabricated jambs with ready-to-hang hinges reduce on-site time. Get multiple quotes that itemize labor hours and material grades to compare value rather than just price.
Door Type Pricing Benchmarks: Hollow Core, Solid Core, and Fire-Rated
Hollow-core doors are usually the lowest-cost option, while solid-core adds mass and sound dampening. Fire-rated doors incur higher material costs plus stricter framing and hardware requirements. Typical per-door ranges: hollow core $70-$150, solid core $150-$320, fire-rated $300-$600.
Regional Price Differences for Interior Door Projects
| Region | Low | Average | High | Notes |
|---|---|---|---|---|
| Midwest | $360 | $520 | $860 | Moderate labor rates, standard materials |
| South | $340 | $500 | $820 | Lower to mid-range framing and finish costs |
| Northeast | $420 | $620 | $1,000 | Higher labor and permit likelihood |
| West | $380 | $580 | $950 | Varies with urban demand |
Labor Time, Crew Size, and Scheduling for Door Framing and Installation
Most interior door installs take 2-4 hours per unit for a standard doorway with a basic jamb and trim. A second crew member can halve on-site time for large projects or multiple doors. Labor cost often drives the total, with per-hour rates typically $60-$100 in many U.S. markets. Expect longer durations with custom casing or nonstandard openings.
How to Compare Quotes Between Contractors
Ask for itemized quotes that separate materials, labor, and hardware. Look for consistency in doorway height, jamb width, and finish quality. A quote showing $350-$700 for framing and $90-$180 for hinges per door helps you see where costs cluster. Always confirm the number of doors and any included trim or painting in the estimate.