Buying a 100 ft wood fence typically costs a range based on materials, labor, and site factors. The price to install a 100 ft wooden fence will reflect fence height, post spacing, gates, and access. This article presents the cost range and the main drivers for a U.S. project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $1,000 | $2,250 | $3,750 | Includes boards, posts, concrete, fasteners |
| Labor | $1,200 | $3,000 | $5,000 | 2–3 workers, 2–3 days typical |
| Equipment | $150 | $600 | $1,200 | Tools, rental if needed |
| Permits | $0 | $150 | $600 | Depends on locale |
| Delivery/Disposal | $50 | $200 | $500 | Wood, soil, debris disposal |
| Estimated Total | $2,400 | $5,200 | $11,050 | Low-cost materials to premium options |
Typical Total Price for 100 Ft Wood Fence with Gates
Most projects fall within a $2,400 to $11,050 range depending on material choice, gate count, and installation difficulty. For a common setup using pressure-treated pine with one 4-foot gate, expect about $2,400–$4,800. Upgrading to cedar or composite rails, or adding a second gate, can push the total toward $6,000–$9,000. At the high end, premium hardwood panels, custom rail profiles, or challenging terrain can reach $9,000–$11,000+ for 100 ft.
Assumptions: Midwest labor rates, standard 6-foot privacy panels, 2 gates maximum, level ground.
Main Cost Components in a 100 Ft Wood Fence Install
Understanding how costs break down helps buyers compare quotes. A typical quote separates materials, labor, equipment, permits, and disposal.
| Component | Low | Average | High |
|---|---|---|---|
| Materials | $1,000 | $2,250 | $3,750 |
| Labor | $1,200 | $3,000 | $5,000 |
| Equipment | $150 | $600 | $1,200 |
| Permits | $0 | $150 | $600 |
| Delivery/Disposal | $50 | $200 | $500 |
| Subtotal (before tax) | $2,400 | $6,200 | $11,050 |
| Taxes | $0 | $350 | $900 |
| Total Estimate | $2,400 | $6,550 | $11,950 |
Material choice is the largest driver of cost per linear foot for a 100 ft fence. Pressure-treated pine remains the most economical, roughly $12–$20 per linear foot installed. Cedar typically runs about $18–$35 per ft, while high-end options like redwood or composite can reach $35–$60+ per ft. For 100 ft, this translates to a total material cost range of roughly $1,200–$6,000 depending on wood type and rail style.
Assumptions: standard 6 ft privacy panels, 4×4 posts, 2–3″ boards, typical staining finish.
Labor cost scales with crew size and job duration, influencing overall price. A two-person crew typically completes 100 ft in 1.5–2.5 days on flat ground; a three-person crew may finish in 1–2 days but raises daily rates. Expect labor to cost about $1,200–$5,000 depending on region and project complexity. Larger crews or difficult access can push the range higher.
Assumptions: standard access, no major excavation, weekdays work schedule.
Geography matters: labor rates and material costs shift by region. The Northeast generally sees higher price points than the Midwest, while the Southwest may be moderate unless desert terrain requires special fasteners. Expect average total quotes to vary by roughly ±20–35% between regions for the same specs and height. For example, a 6 ft privacy fence in a high-cost city could hit $7,000–$9,000, while a similar project in a rural Midwest area could be $3,500–$5,500.
Assumptions: standard 6 ft panel height, level lot, single gate.
Height and spacing directly influence material usage and anchoring work. Increasing height from 6 ft to 6.5 ft adds more boards and posts and may require longer posts or stronger concrete. Tight post spacing (6 ft on center) uses more posts than wider spacing (8 ft on center). For 100 ft, moving from 6 ft to 6.5 ft typically adds 5–15% to material and labor costs, while changing spacing from 8 ft to 6 ft could add roughly 15–25% to total costs.
Assumptions: standard 8 ft wide yard, level soil, mid-range hardware.
Add-ons like lattice, gates, post caps, or staining impact final pricing. A single 4 ft gate adds roughly $350–$900, lattice panels cost around $2–$6 per linear ft, and staining/sealing runs about $0.75–$2 per ft. Power washing or decorative finishes can add $0.50–$1.50 per ft. Budget around $300–$1,200 for upgrades on a 100 ft fence with one gate.
Assumptions: standard gate size, no custom hardware beyond basic finishes.
Smart scope management and timing can trim price without sacrificing durability. Consider opting for standard materials, a single gate, and eliminating custom profiles. Scheduling in an off-peak season can lower labor rates, while bundling fence work with nearby projects may secure volume discounts. If replacement is feasible, repairing damaged boards rather than full replacement can reduce costs by 20–40% in some cases. Compare multiple quotes and verify local permit requirements before starting.
Assumptions: no major site remediation, standard ground conditions, local permit threshold per municipality.