Buyers typically pay for a new range hood and its ducting based on hood size, duct length, vent type, and labor. The cost range can vary from basic insert installations to high-end stainless installations with custom ductwork. The price to install a range hood and duct reflects hood size, system type, duct routing, and local labor rates. The price you see includes the hood, duct materials, and professional installation in most cases, with variability by region and project scope.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Total project cost | $500 | $1,350 | $3,000 | Includes hood and ducting, installation, and basic venting |
| Per-unit hood price (30–36 inch) | $150 | $350 | $900 | Based on midrange range hoods |
| Ductwork materials | $100 | $250 | $900 | Rigid or semi-rigid duct, elbows as needed |
| Labor (installation) | $350 | $800 | $1,400 | Includes mounting, electrical, test run |
| Permits or inspections | $0 | $100 | $300 | Depends on local rules |
Cost for Installing a Range Hood and Duct: Typical Total and Per-Unit Prices
Assumptions: standard 30–36 inch hood, 6–12 feet of straight duct, standard wall vent, Midwest or suburban labor rates, normal cabinet access.
A typical installation falls in a low-to-average range when replacing an existing vent with straightforward routing. A full new install with longer duct runs or exterior wall venting can push pricing into the high range. For a 30–36 inch hood, expect total costs commonly $800–$1,600 in many markets, with per-unit hood pricing around $150–$400 and duct materials at $100–$250 depending on duct type.
Major Cost Components in a Range Hood and Duct Installation Quote
Understanding what drives the quote helps compare bids accurately. The primary cost blocks are the hood itself, ducting, and labor, followed by extras.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Hood unit | $150 | $350 | $900 | 30–36 inch, basic to stainless |
| Ducting materials | $100 | $250 | $900 | Rigid semi-ran, elbows, exterior vent |
| Labor | $350 | $800 | $1,400 | Mounting, electrical work, vent connection |
| Electrical hookup | $50 | $150 | $350 | Wiring, switch or outlet check |
| Permits/inspections | $0 | $100 | $300 | Region dependent |
| Delivery/ disposal | $0 | $50 | $150 | If applicable |
Duct Length, Vent Type, and System Type as Price Levers
The most impactful drivers are duct length, the number of bends, and whether the vent is through an exterior wall or roof. Longer runs and more bends add material and labor time. A 6–12 foot run with two elbows might add $150–$350 to the base price, while rerouting indoors or using rigid metal duct can push costs higher.
Variables That Change the Final Quote: Duct Run, Hood Type, and Installation Site
Key numeric thresholds affect quotes: duct length over 10 ft, more than two elbows, ceiling height, and distance to an exterior wall. A longer run (>12 ft) or nonstandard venting can add $200–$600 in material and labor, while premium stainless hoods with integrated lighting can raise the hood cost by $200–$500 beyond basic models.
Ways to Cut the Price on a Range Hood and Duct Installation
Careful scope control and timing help reduce costs. Consider reusing an existing vent if feasible, selecting a simpler hood model, consolidating trips by coordinating parts delivery, or combining with other kitchen updates. Deferring upgrades like high-end filters or smart features can lower the upfront expense, and requesting bid comparisons helps identify the best value.
Regional Price Variations for Range Hood Installations
Prices vary by region due to labor markets and permitting rules. In the Northeast, expect higher labor rates and potential permit costs, whereas the Midwest often features lower labor totals. A regional delta of ±20–30% is common between markets for the same hood and duct configuration.
Labor Time, Crew Size, and Scheduling Considerations
Most jobs require a two-person crew for 3–6 hours on a standard installation. A larger or more complex project could extend to a 1-day job. Typical labor ranges are $500–$1,000, with hourly rates around $75–$125 per hour per installer at mid-range markets. Local scheduling constraints can shift totals by a few hundred dollars if rush service is requested.
Add-Ons, Prep Work, and Site Preparation Fees
Prep work such as cabinet cutting, ceiling repairs, or drywall patching adds to the bottom line. If wall clearance is tight or cabinets obstruct access, labor costs rise. Typical add-ons run $50–$300 depending on scope and required patching or finishing.
Replacement vs. New Install: What Drives Cost Differences
Replacing an old hood on the same vent path is cheaper than a full new installation with relocation. If duct routing remains the same but only the hood is upgraded, expect a 30–50% reduction in labor complexity. New routes and exterior venting generally push totals higher.
Three Real-World Quote Scenarios
- Scenario A: 30″ hood, 8 ft straight duct, exterior wall vent, standard aluminum duct, Midwest, two-person crew, no permit: Total $900–$1,300; Hood $250; Duct $120; Labor $450–$600.
- Scenario B: 36″ hood, 12 ft with two elbows, interior through-ceiling vent, stainless hood, permits not required in suburban area, 2 workers: Total $1,600–$2,400; Hood $450; Duct $350; Labor $600–$900.
- Scenario C: High-end commercial-grade hood, 16 ft duct with 3 elbows to exterior roof, premium stainless, rainproof exterior cap, expedited schedule: Total $2,800–$4,000; Hood $900; Duct $600; Labor $1,300–$1,700.