The cost to redo gutters is typically $1,200-$3,000 for a standard one-story home, with price driven by linear footage, gutter material, roof access, and removal of the old system. Small repairs or basic vinyl can cost less, while larger homes, steep roofs, and premium metals can push a quote above $5,000.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Complete gutter replacement | $700 | $2,100 | $5,500+ | Typical residential project |
| Installed aluminum gutters | $6 per linear ft | $12 per linear ft | $20 per linear ft | Seamless system, including labor |
| Removal and disposal | $1 per linear ft | $2 per linear ft | $4 per linear ft | May be included in a full quote |
| Downspouts | $8 per linear ft | $14 per linear ft | $25 per linear ft | Installed, depending on material |
What a 150-foot gutter replacement usually costs
For a typical 1,500-2,000-square-foot house with about 150 linear feet of gutters, a standard seamless aluminum replacement commonly totals $1,200-$2,700. That estimate generally includes removal, installation, standard hangers, and a few downspouts, but excludes extensive fascia repair or difficult roof access.
Basic vinyl may bring a small, straightforward project down to roughly $700-$1,500. Copper or other premium systems can exceed $5,000, especially on larger homes. Assumptions: standard U.S. labor rates, ordinary access, 5-inch gutters, and no major wood repairs. For many homes, seamless aluminum offers a practical balance of price and durability.
How aluminum, steel, and copper change the quote
Material makes a substantial difference, but quoted rates should be compared on the same basis: installed price per linear foot, gutter size, downspout count, and removal. These typical ranges include installation and can vary with regional labor and roof conditions.
| Material | Installed rate | 150-foot estimate | Typical price effect |
|---|---|---|---|
| Vinyl | $4-$9 per linear ft | $600-$1,350 | Low upfront price; joints may need more attention |
| Seamless aluminum | $8-$18 per linear ft | $1,200-$2,700 | Common residential choice |
| Galvanized steel | $10-$22 per linear ft | $1,500-$3,300 | Heavier material and often higher labor |
| Copper | $25-$50 per linear ft | $3,750-$7,500 | Premium material and specialized installation |
Compare complete installed rates rather than material prices alone. A low material quote may omit removal, downspouts, outlet fittings, or sales tax, while a higher bid may include those items.
Which roof length, gutter size, and access conditions raise prices?
Linear footage is the main quantity driver: increasing a home from 150 to 220 feet adds roughly $560-$1,260 for aluminum at $8-$18 per foot, before unusual access or repair charges. Contractors may measure roof edges rather than use the home’s interior square footage.
Five-inch gutters are common, while 6-inch systems can cost about 10%-25% more and may be specified for large roof areas or heavy rainfall. Steep roofs, three-story elevations, tight access, and many corners can add 10%-30% through slower installation or added safety equipment. Ask whether the quote specifies 5-inch or 6-inch gutters and counts every downspout.
What removal, fascia repairs, and accessories add
Taking down old gutters typically costs $1-$4 per linear foot if billed separately. New downspouts, elbows, splash blocks, leaf screens, and outlet fittings can each affect the final estimate. Leaf guards often add $5-$15 per linear foot installed, depending on design and compatibility.
Hidden damage behind the gutter is a common extra. Replacing fascia board may cost about $6-$15 per linear foot, while localized rot repairs can be priced by the hour or as a project allowance. Request separate prices for disposal, fascia work, guards, and drainage extensions. That makes it easier to distinguish required repairs from optional upgrades.
How regional labor rates affect gutter installation
Rates in high-cost metro areas and coastal markets can run about 15%-30% above a national midrange estimate. Smaller towns and rural areas may be 5%-15% below it, although travel distance or limited contractor availability can erase the difference. Severe-weather regions may also see busy-season pricing after storms.
For a 150-foot aluminum job priced at a national midpoint of $2,000, a high-cost market could land near $2,300-$2,600, while a lower-cost market might be around $1,700-$1,900. Compare at least three local written estimates with the same footage and scope. Local prices matter more than national averages when setting a final budget.
How many labor hours does a gutter redo take?
A two-person crew can often remove and replace gutters on a one-story home in 6-10 hours when access is clear and fascia is sound. A two-story home, many roofline changes, or repair work may extend the job to 1-2 days. Labor is commonly embedded in the installed rate; where billed separately, expect roughly $50-$100 per worker-hour.
For example, 12 worker-hours at $75 per hour equals $900 in labor before materials, equipment, or disposal. Confirm whether a labor allowance is included or charged separately.
Three realistic aluminum gutter quotes for different homes
| Home and scope | Quantity and labor | Estimated total |
|---|---|---|
| Small one-story, simple roof | 100 ft at $10-$15 per ft; 6-8 crew hours | $1,000-$1,500 |
| Average two-story home | 170 ft at $12-$18 per ft; 10-14 crew hours | $2,040-$3,060 |
| Large home with steep sections | 240 ft at $15-$22 per ft; 16-24 crew hours | $3,600-$5,280 |
These examples assume seamless aluminum and ordinary disposal; they do not include significant fascia replacement or premium guards. Use the home’s measured footage and access conditions to judge whether a quote is comparable.
Where homeowners can trim a gutter replacement budget
Keeping sound fascia and choosing standard-color aluminum can avoid premium material and carpentry charges. If only a few sections leak, a repair may cost $150-$600 for patching, resealing, or replacing a short run, rather than a full-system redo. However, widespread corrosion, repeated separation, or sagging along many runs may make replacement more economical.
Schedule before peak storm-repair demand when possible, clear landscaping near work areas, and bundle gutters with other exterior work only when the scopes and prices remain clear. Skip guards if trees and roof conditions do not justify them. Ask each contractor to price replacement, necessary repairs, and optional upgrades separately.