Buyers generally pay a mid-range price to reglaze a sink, with costs driven by sink material, shell depth, prep work, and regional labor rates. The price usually falls between $250 and $950, depending on the glaze type, condition, and whether a full replacement is avoided.
Assumptions: standard ceramic or porcelain sink, mid-range epoxy glaze, normal access, mild surface prep, and nearby urban labor markets.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Reglaze Service | $250 | $450 | $950 | Materials and labor included |
| Perimeter Prep and Cleaning | $40 | $120 | $200 | Stubborn stains may raise cost |
| Repair or Substrate Fixes | $60 | $180 | $400 | Cracks or chips add cost |
| Material Upgrade (high-gloss or specialized finish) | $0 | $80 | $200 | Optional upgrade |
| Labor Rate (hourly equivalent) | $25 | $60 | $120 | Regional variance |
What you typically pay for sink reglazing and finish options
Typical total price ranges from $250 to $950, with average around $450 for a standard ceramic or porcelain sink. The exact figure depends on the glaze type, surface condition, and whether any repairs are needed before coating. A straightforward reglaze of a single basin in a normal kitchen usually lands in the $350-$600 band, while high-end finishes or textured surfaces can push toward the $800-$950 range.
| Scenario | Low | Average | High | Notes |
|---|---|---|---|---|
| Single Kitchen Sink Reglaze | $250 | $450 | $700 | Standard glaze, light prep |
| Double-Basin Sink Reglaze | $350 | $600 | $950 | Two basins, shared prep |
| Repair-Driven Reglaze | $250 | $500 | $900 | Cracks or chips fixed first |
Pricing components that appear in a reglaze quote
Labor, materials, and prep dominate the price, with small add-ons for repairs and finishes. The breakdown below reflects the main cost drivers commonly listed on quotes for a sink reglaze project.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (glaze, bonding agent, topcoat) | $50 | $120 | $260 | Quality and gloss level affect cost |
| Labor | $150 | $320 | $620 | Hours depending on prep and cure time |
| Surface Prep | $20 | $60 | $150 | Cleaning, sanding, minor repairs |
| Repairs/If Substrate Fixes | $60 | $180 | $400 | Cracks, rust, or pitting |
| Finish Options (high gloss, anti-ghosting) | $0 | $80 | $200 | Extra coat or special resin |
| Permit or Disposal | $0 | $20 | $60 | Usually not required; include if applicable |
What most alters the final reglaze price for a sink
Size and condition are the two biggest levers: larger or heavily damaged sinks raise both material and labor hours. Numeric drivers to watch include circumference or basin area in square feet and the presence of multiple basins. Regional labor rate differences also shift totals by 10-25% depending on urban vs. rural markets. A standard 20-inch-wide sink in a mid-range market typically stays near $350-$600, while a 30-inch or double-basin unit can range $550-$950 with repairs.
Assumptions: standard mid-priced glaze system, normal ventilation, and typical kitchen access suitable for spraying and curing without special containment.
How to trim cost without compromising results
Focus on scope clarity and material choices to avoid surprises. Practical steps include choosing a mid-range gloss, avoiding premium decorative finishes, limiting repairs to essential fixes, and scheduling work during normal business hours to reduce labor surcharges. If the sink is still structurally sound, reglazing usually costs less than a full replacement, and you may preserve fixture height and cabinet alignment.
Regional price variations you should expect
Prices can shift by regional market intensity and material availability. In the Northeast and West Coast, you might see averages $420-$700, while the Midwest often hovers around $350-$550. The South may land in the $300-$520 band. These deltas reflect labor density, travel time, and local supply chains.
Practical quote examples you can use for budgeting
- Single kitchen sink, standard porcelain, no repairs: $320-$520 total; glaze + prep included; 6-8 hours labor
- Double-basin steel sink, light pitting, mid-range gloss: $520-$800 total; minor substrate fixes present
- Porcelain sink with hairline cracks, high-gloss finish: $700-$950 total; repairs + premium topcoat
- Older cast-iron sink, heavy staining, complete refinish: $900-$1,200 total; may require longer cure time
Decision points to control price on reglazing a sink
Decide between repair-focused refinishing or full replacement up front. If the substrate is compromised beyond cosmetic, replacement might become more cost-effective in the long run. Scheduling during off-peak times can reduce labor surcharges. Choosing standard finishes over specialty textures also helps keep costs predictable.