Fascia replacement typically costs $6-$30 per linear foot installed, with many U.S. homeowners paying about $10-$16 per linear foot. The cost to replace fascia on a house depends mainly on total board length, material, roof height, access, and whether damaged soffits or gutters also need work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed fascia | $6/linear ft | $13/linear ft | $30/linear ft | Removal and installation; material and access affect price |
| Typical house project | $900 | $2,200 | $5,500 | About 150-250 linear feet |
| Fascia board material | $2/linear ft | $5/linear ft | $12/linear ft | Primed wood, PVC, or metal-wrapped boards |
| Labor | $4/linear ft | $8/linear ft | $18/linear ft | Higher for steep roofs or difficult access |
Typical fascia replacement prices by linear foot
For a straightforward job using standard materials, expect about $6-$15 per linear foot installed. A 180-linear-foot project commonly totals $1,100-$2,700. Premium PVC, custom metal wrapping, extensive rot, or elevated work can push a quote to $16-$30 per linear foot and a total of $3,000-$5,500 or more.
Most standard projects fall near $1,500-$3,500 when only the fascia is replaced. Estimates usually assume old boards are accessible, roof edges are in sound condition, and no major framing repairs are needed. Assumptions: typical U.S. labor rates, standard board profiles, normal access, and a 150-250-linear-foot home.
What fascia removal and board installation add to a quote
Contractors generally price the work as a combined removal, disposal, and installation job. Ask whether the quote includes paint or metal wrapping, gutter removal and reinstallation, and replacement of damaged subfascia. Those items can change the total substantially, even when the visible fascia length is modest.
| Quote component | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Fascia boards | $2-$12 | Per linear ft | Wood species, PVC grade, or metal wrap |
| Removal and installation labor | $4-$18 | Per linear ft | Roof pitch, height, access, and rot |
| Gutter removal and reset | $3-$8 | Per linear ft | Gutter condition and fastening method |
| Disposal and site cleanup | $75-$300 | Per project | Debris volume and local disposal charges |
| Subfascia repair | $5-$15 | Per linear ft | Extent of water damage and roof-edge access |
Labor commonly accounts for a large share of the bill. A small crew may charge $50-$100 per worker-hour, though many contractors quote fascia work by the linear foot instead. A two-person crew might need 1-3 days for a typical home, depending on setup and repairs.
How roof height, board material, and rot change the price
Height and access can be major cost drivers. One-story work with level ground is generally less expensive than a two-story roof edge requiring staging or lift equipment; difficult access can add roughly 15%-40%. A roof pitch above 6:12 may also increase labor because workers need more fall protection and setup time.
Material affects both initial price and finish. Primed pine or similar wood is often $2-$5 per linear foot for boards, while PVC may run $4-$12 and aluminum-wrapped fascia about $3-$9, before installation. Rot extending into the subfascia or rafter tails can add $5-$15 per affected linear foot, and concealed damage may not be clear until boards come off.
Measure the roof edge and specify material before comparing bids. A 100-linear-foot repair is not directly comparable to a full 250-linear-foot replacement, particularly if one contractor includes gutter handling or wood repair and another does not.
Reduce fascia costs by controlling replacement scope
Replacing only the failed runs can cost less than doing every roof edge, provided adjoining boards are sound and the new finish can be matched. Have the contractor identify damaged lengths in writing and distinguish fascia replacement from subfascia or rafter-tail repairs. Avoid agreeing to a full perimeter replacement based only on a few visibly rotten spots.
Compare at least three itemized estimates with the same linear footage, material, paint or wrap finish, disposal, and gutter work. Scheduling during a contractor’s less-busy period may improve availability, but weather and safe roof conditions still matter. Scope clarity and comparable bids are usually more reliable savings than choosing the lowest material price.
Regional labor rates can shift fascia bids by 10%-30%
Prices tend to run higher in major coastal metros and high-cost markets than in smaller inland communities. As a broad estimate, dense Northeast, West Coast, and major urban markets may be 10%-30% above the national midpoint; rural markets in lower-cost regions may be 5%-15% below it. These are planning ranges, not fixed regional tariffs.
Local access and contractor demand can outweigh geography. A home on a steep lot, a narrow property line, or a block with limited equipment access may cost more even in a lower-priced market. Request a local quote that states board length and any access charge rather than relying solely on a national per-foot estimate.
How long a fascia crew needs at each project size
A small repair of 30-60 linear feet may take half a day to one day if the crew can work without moving extensive equipment. Replacing 150-250 linear feet often takes 1-3 days for a two-person crew, including removal, installation, cleanup, and minor repairs. Extensive rot, multiple roof levels, or gutter work can add another day or more.
Some contractors have a minimum charge of about $250-$600 for small jobs because travel, setup, and safe access take time regardless of board length. Confirm whether the estimate includes weather delays, paint curing, and temporary protection if the work cannot be completed in one visit.
When gutter and soffit work belongs in the same estimate
Gutters often attach directly to fascia, so removing and resetting them can add $3-$8 per linear foot. If gutters are already sagging, leaking, or corroded, replacement may be more practical than paying to reinstall them. New gutter installation commonly adds roughly $8-$18 per linear foot, depending on material, size, and downspout needs.
Soffit replacement is a separate scope, often priced around $6-$20 per square foot installed. Water stains, soft wood, or pest openings near the eaves may indicate related damage, but a contractor should explain what is confirmed and what is only a possibility before work begins.
Three fascia quotes for different house sizes
| Project | Scope and labor | Estimated total |
|---|---|---|
| Small repair | 60 linear ft of primed wood; 6-8 labor hours | $600-$1,100 |
| Typical replacement | 180 linear ft of wood fascia; 16-24 labor hours; limited gutter reset | $1,800-$3,400 |
| Large, elevated home | 250 linear ft of PVC; 30-40 labor hours; staging and some subfascia repair | $4,000-$7,000 |
These examples assume ordinary disposal and no major structural reconstruction. The large-home estimate is higher because of height, premium material, and repair work, not simply because it has more fascia. Check that each quote lists footage, material, labor scope, access equipment, and excluded repairs.