Replacing a range hood typically ranges from budget installs around $600 to premium setups near $2,500, driven by hood size, venting method, and installation complexity. The main cost drivers are hood unit price, duct routing, electrical work, and labor time. This article provides clear low-average-high ranges in USD and practical ways to estimate and manage the price for a replacement range hood.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Range hood unit | $150 | $650 | $2,000 | Airflow, material, and finish vary widely |
| Labor (installation) | $120 | $350 | $900 | Includes removal of old hood |
| Ductwork/vent routing | $100 | $400 | $1,000 | Distance to exterior and bends matter |
| Electrical/connections | $75 | $150 | $350 | Power supply and switching |
| Permits/inspections | $0 | $50 | $300 | Depends on local codes |
| Disposal/recycling old hood | $0 | $25 | $100 | Minimal, varies by provider |
Assumptions: Midwest labor rates, standard 30–60 inch ceiling height, typical 6″ round vent, no custom cabinet modification.
Direct Price Range for a Standard 30–36 Inch Range Hood
Typical total installed price sits between $650 and $1,400 for a common 30–36 inch unit with standard ducting. A basic, energy-efficient model can land near the lower end, while a stainless steel or professional-grade unit with high CFM and backdraft protection pushes toward the higher end.
Cost Breakdown by major components
Understanding the exact parts of the quote helps buyers compare quotes and spot where savings occur. The table shows common cost drivers and realistic dollar ranges.
| Component | Low | Average | High | Typical Notes |
|---|---|---|---|---|
| Range hood unit | $150 | $650 | $2,000 | Material: stainless vs. painted metal; CFM |
| Labor | $120 | $350 | $900 | Removal, mounting, and alignment |
| Ductwork | $100 | $400 | $1,000 | Distance to exterior, single vs. dual bends |
| Electrical | $75 | $150 | $350 | New outlet, wiring, switch or timer |
| Permits | $0 | $50 | $300 | Code requirements vary by city |
| Disposal | $0 | $25 | $100 | Hood haul-away fees |
Assumptions: standard single-story installation, existing duct location, no cabinet changes.
What Variables Most Move the Final Quote
Final pricing hinges on venting complexity and hood features. If the duct must route through multiple walls or a long ceiling run, expect higher costs. Two numeric thresholds to watch are run length over 6 feet and diameter changes above 6 inches.
Regional Differences: Price Variations by U.S. Region
Prices can swing by region due to labor benchmarks and permit costs. In the West and Northeast, installations may run 10–20% higher than the Midwest, while parts availability can also affect timing.
How Hood Size and CFM Drive the Bottom Line
Higher airflow (CBM/CFM) units cost more upfront and can require more robust ducting and electrical work. A 600 CFM hood will be cheaper than a 900–1,200 CFM model with similar finishes, and the difference can be $150–$600 in unit price alone.
Material and Finish: Stainless, Glass, or Painted Steel
Finish and material influence both unit price and installation ease. A basic painted steel hood may be $150–$400, while brushed stainless with glass accents can push to $1,000–$2,000, not counting labor.
Labor Time: How Many Hours to Install?
Most replacements take 2–6 hours, depending on duct routing and electrical work. Labor rates commonly range $75–$125 per hour, totalizing $150–$700 for most jobs.
Cost Reduction Tactics Without Compromising Safety
Smart moves include keeping the same duct path, choosing a standard size, and coordinating installation with other kitchen projects. Bundling services or selecting a simpler hood can reduce costs by 15–30% in some markets.
Three Real-World Quote Scenarios With Specs
Example A: 30-inch stainless hood, 600 CFM, standard duct to exterior, Midwest. Itemized: hood $400, labor $300, ductwork $150, electrical $100, disposal $25 — Total $975. Example B: 36-inch wall-mounted stainless hood, 900 CFM, exterior vent, West region. Hood $800, labor $420, duct $350, electrical $180, permit $100 — Total $1,850. Example C: 42-inch professional hood, 1,200 CFM, complex routing, Northeast. Hood $1,200, labor $640, duct $520, electrical $240, permit $180 — Total $2,780.
Assumptions: standard ceiling height, single-story home, typical drywall path, no custom cabinetry work.
Maintenance Footnote: Longevity and Worthwhile Upgrades
Consider efficiency and warranty when comparing models. A hood with a longer warranty and higher efficiency may cost more upfront but can reduce replacement frequency and energy bills over time.