Replacing siding on a 1,000-square-foot house typically costs about $7,000-$24,000, with many standard vinyl projects near $13,500. The final price depends on the home’s exterior wall area, siding material, removal and repair needs, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed replacement | $7,000 | $13,500 | $24,000 | About 1,000-1,400 sq ft of siding |
| Vinyl siding | $5-$8 per sq ft | $8-$11 per sq ft | $12-$15 per sq ft | Installed; varies by profile and removal |
| Fiber cement siding | $8 per sq ft | $12-$16 per sq ft | $20 per sq ft | Installed; heavier material needs more labor |
What siding replacement costs on a 1,000-square-foot house
A compact, one-story home with simple walls and standard vinyl may cost $7,000-$11,000. A typical project with tear-off, house wrap, trim, and moderate wall repairs often falls around $11,000-$17,000. Premium materials, complex architecture, or extensive sheathing repairs can push the quote to $24,000 or more.
Floor area is not the amount of siding being installed. A 1,000-square-foot home often has roughly 1,000-1,400 square feet of siding after accounting for its footprint, wall height, gables, and openings. Assumptions: U.S. pricing, ordinary access, professional installation, and no major structural damage.
How tear-off, siding, trim, and labor shape the quote
Quotes may bundle materials and labor, so homeowners should check what is included before comparing totals. These typical ranges show common line items for a 1,200-square-foot wall surface; add-ons can overlap with packaged installation pricing.
| Quote item | Low | Typical | High |
|---|---|---|---|
| Siding material | $2,400 | $4,800 | $9,600 |
| Installation labor | $2,400 | $4,800 | $7,200 |
| Old siding removal and disposal | $600 | $1,200 | $2,400 |
| House wrap, flashing, and trim | $500 | $1,300 | $2,500 |
| Permits and minor repairs | $0 | $700 | $2,000 |
Ask for separate prices for tear-off, wall repairs, and trim. Labor may be estimated by the project or calculated using crew hours and local rates, commonly about $40-$90 per worker-hour.
Wall height, siding material, and damage change the estimate
Measuring actual wall area is the first major pricing step. A one-story home with 8-foot walls and a simple shape can require less siding and setup time than a taller home with 10-foot walls, dormers, or multiple gables. Windows and doors reduce material needs, but intricate trim can add labor.
Material selection also shifts the total. Vinyl is generally the lower-cost option; engineered wood often costs about $8-$14 per installed square foot, while fiber cement commonly runs $10-$18. Wood, specialty profiles, and premium finishes can exceed those ranges. If damaged sheathing covers more than 10%-15% of the wall, repairs may add $1,000-$4,000 or more.
Material, wall area, and hidden damage matter more than the home’s floor-area label alone. Request a measured siding-area figure and a per-square-foot rate, and confirm whether that rate includes corners, starter strips, flashing, and waste.
How contractor labor time affects a siding project
A straightforward 1,000-square-foot home may take a three- or four-person crew about 4-7 working days, including removal and installation. Fiber cement, extensive trim, difficult access, or repair work can extend the job to 1-2 weeks. Labor costs rise when scaffolding, steep grades, or multiple stories slow installation.
Compare the crew size, workdays, and included tear-off before treating one labor quote as cheaper. A low bid may assume that the owner handles disposal or that existing wrap and sheathing need no attention.
Regional siding prices vary with labor and weather
Contractor pricing can differ by roughly 10%-25% between lower-cost rural markets and high-cost metropolitan areas. Rates in parts of the Northeast, West Coast, and major cities may run 10%-20% above a national middle-range estimate; less expensive markets may be 5%-15% below it. Local demand, travel distance, and seasonal workload also affect availability.
Use local quotes rather than a national average to set a firm budget. Compare at least three bids that specify the same material, measured area, removal scope, and repair allowance.
Removal, trim, and sheathing repairs add separate charges
Removing and hauling away old siding commonly adds about $0.50-$2 per square foot, depending on material, layers, and disposal fees. Replacing damaged sheathing may cost $2-$5 per square foot of repaired area. New soffits, fascia, corner boards, or window trim can add several hundred to several thousand dollars according to length and material.
Permits may cost $100-$500 where required, while code-related wall or flashing upgrades can raise the bill. If the existing siding may contain asbestos, testing and licensed abatement are separate expenses and can substantially increase project costs.
Have the contract state how concealed damage is priced and approved. A written change-order rate helps prevent unexpected repairs from turning into an open-ended charge.
Which choices can lower the siding replacement price
Keeping the existing layout, choosing standard-profile vinyl, and avoiding unnecessary decorative trim can reduce material and labor charges. Clearing shrubs and stored items from the work area may improve access, though the crew should handle tasks that involve ladders, electrical fixtures, or siding removal.
Ask whether sound existing siding can remain under a new system; this may save tear-off expense, but moisture, code, and manufacturer requirements determine whether it is suitable. Get quotes with identical scope, and compare warranty terms and repair allowances rather than selecting solely by the lowest total.
Control scope before changing quality. A detailed quote for measured area, material grade, removal, disposal, wrap, trim, and repairs makes it easier to identify genuine savings without leaving necessary work out.