Replacing siding with brick involves several cost drivers including the choice between brick veneer and full brick, removal of existing siding, and regional labor rates. This article presents practical price ranges in USD and per-unit details to help buyers plan a budget for brick siding replacement. The focus is on cost and price accuracy for a U.S. audience, with clear low-average-high figures and driver notes within the first 100 words.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Brick veneer siding (installed, per sq ft) | $8 | $14 | $25 | Includes veneer, mortar, and basic finish |
| Full brick exterior (installed, per sq ft) | $18 | $28 | $45 | Bricks, mortar, and structural work |
| Removal of existing siding (per sq ft) | $1 | $2.50 | $4 | Depends on material being removed |
| Structural prep and sheathing if needed (per sq ft) | $0.50 | $1.50 | $3 | Stock wood or plywood prep |
| Permits and inspections (fixed project) | $200 | $600 | $1,200 | Local jurisdiction dependent |
| Delivery and disposal (per project) | $300 | $900 | $2,000 | Includes debris haul and brick delivery |
Brick Siding Replacement: Typical Costs by Size and Scope
Most homeowners pay a broad range depending on whether they choose brick veneer or full brick. For a standard 1,600–2,000 sq ft house, brick veneer typically lands in the range of $12,000 to $40,000, with $22,000 as a common average. Full brick installations are more costly, often $28,000 to $90,000 or more, with $50,000 as a common mid-point. These figures reflect material differences, scaffold access, and the extent of structural work required. Assumptions: Midwest labor rates, standard veneer or brick, normal access, no major structural upgrades.
Major Cost Components in Brick Siding Install
The quote breaks down into key components that vary by project scope. Materials and labor typically dominate the total price. A representative breakdown for veneer versus full brick helps compare two paths side by side.
| Cost Component | Brick Veneer (per sq ft) | Full Brick (per sq ft) |
|---|---|---|
| Materials | $5–$9 | $12–$20 |
| Labor | $6–$10 | $14–$22 |
| Equipment | $0.50–$2 | $1–$3 |
| Permits | $0–$60 | $0–$60 |
| Delivery/Disposal | $150–$500 | $200–$700 |
| Removal of old siding | $0.50–$2 | $1–$3 |
| Subtotal | $8–$21 | $28–$46 |
| Total project | Typically $12,000–$40,000 | Typically $28,000–$90,000 |
Influential Variables That Change the Final Brick Siding Price
Size and scope drive most price changes. A home with 1,200 sq ft of exterior will cost less than a 3,000 sq ft project, and complex elevations raise both material waste and labor hours. Other major levers include the chosen brick type (face brick vs. brick veneer), bond pattern, insulation requirements, existing wall condition, and access for scaffold or lifts. For regional variance, the Northeast typically shows higher labor costs than the South, all else equal. Assumptions: typical residential walls, standard access, standard brick types.
Ways to Trim the Brick Siding Bill Without Sacrificing Quality
Control scope and sequencing to reduce price without compromising durability. Consider brick veneer instead of full brick for large homes. Minimize costly scaffold time by scheduling during favorable weather and combining disposal tasks with other remodels. Choosing a mid-range brick and simplifying patterns can cut material waste. Assumptions: no major structural upgrades, regional pricing typical.
Regional Price Variations for Brick Siding in the United States
Prices shift with local labor markets and supply chains. In practice, expect a regional delta of roughly ±20% between lower-cost Southern markets and higher-cost coastal metros. A 1,600–2,000 sq ft home might cost about $15,000–$28,000 in midwest regions for veneer, versus $28,000–$60,000 in high-cost coastal markets for full brick. Assumptions: standard climate zone, typical labor rates.
Per-Sq-Ft Costs for Brick Veneer vs Full Brick by Project Type
Per-square-foot pricing helps compare project types directly. Brick veneer often lands in the $8–$21 per sq ft range installed, while full brick typically runs $18–$46 per sq ft installed, depending on bond pattern and structural prep. For ranch-style homes with even elevations, veneer is usually the more economical path. Assumption: average access, standard mortar mix, normal weather.
Post-Work Considerations That Impact Total Expense
After the siding is installed, attention to flashing, sealants, and final inspections can influence the final price through warranty coverage and potential rework. Warranty terms on brick veneer vary more by contractor than brick type. Budget for minor touch-ups or brick cleaning if required by climate exposure and masonry quality. Assumptions: typical regional inspection requirements, standard warranty terms.