The price of replacement doors in the U.S. typically ranges from a low of about $300 per interior door to over $3,000 for high-end exterior systems, with most homeowners paying $600-$1,800 for standard options. Main cost drivers include material, door type, size, hardware, finishing, and installation labor. This article breaks down the cost, showing exact price ranges and practical ways to trim the total.
Assumptions: standard 80-inch tall doors, mid-range hardware, normal access, regional labor markets.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Interior hollow-core door (26×80) | $100 | $180 | $260 | Basic; minimal trim |
| Solid wood/Laminate interior door | $150 | $350 | $700 | Better durability |
| Exterior steel door (Deluxe) | $600 | $1,000 | $2,000 | With jamb and weatherstripping |
| Exterior fiberglass door | $700 | $1,300 | $2,500 | Low maintenance; energy efficient |
| Exterior solid wood door | $900 | $1,800 | $4,000 | Highest finish quality |
| Labor to install a single door | $150 | $350 | $700 | Includes frame prep |
| Hardware kit | $20 | $75 | $150 | Knobs/hinges/strike plate |
| Finishing (paint/stain, reglazing) | $50 | $150 | $400 | VOC considerations apply |
| Disposal and haul-away | $25 | $75 | $150 | Depends on local curb rules |
Cost Breakdown for Replacement Doors by Material
Material choice drives most of the price variation. Interior options peak at hollow-core or solid-core composite doors, while exterior options span steel, fiberglass, and wood. A typical interior door replacement will cost $120-$350 for a hollow-core unit plus $150-$350 for labor, while exterior replacements vary widely by material and size.
For a standard 80-inch door, average pricing by material is as follows: hollow-core interior doors often run $100-$180, solid-core around $200-$350, exterior steel $600-$1,000, fiberglass $800-$1,300, and solid wood $1,000-$2,000 for the door itself. Labor and hardware add roughly 20-40% on top of the door price depending on framing, weatherproofing, and trim work.
Assumptions: standard jamb, matching swing, single-door installation, typical prehung units.
| Material | Low | Average | High | Notes |
|---|---|---|---|---|
| Interior hollow-core | $100 | $180 | $260 | Economy option |
| Interior solid-core | $200 | $350 | $500 | Better sound/durability |
| Exterior steel | $600 | $1,000 | $2,000 | High security, good seal |
| Exterior fiberglass | $700 | $1,300 | $2,500 | Low maintenance |
| Exterior solid wood | $900 | $1,800 | $4,000 | Premium finish |
Exterior vs Interior Door Replacement: Typical Price Range
Exterior door replacements are more expensive due to weatherproofing, core material, and frame work. Typical exterior projects range from $1,000-$3,000 per door, with steel or fiberglass units at the lower to mid end and custom wood or certified crafts at the high end. Interior door swaps are often $150-$700 per door, depending on material and whether framing or drywall work is required. Seasonal demand and door sizing can shift these ranges by 10-20%.
Assumptions: single-door installation, standard rough opening, standard casing and threshold.
The Role of Door Size and Frame in Price
Door dimensions and frame work add notable costs. A 32×80 interior hollow-core door is cheaper than a 36×82 or 42×96 exterior unit, which may require widening the opening and replacing the jambs. For a typical 80-inch door, expect $120-$260 for interior units and $700-$1,400 for exterior units when new jambs and weatherstripping are included. Size and frame upgrades often drive the majority of labor hours.
Assumptions: standard swing, single door, no structural repair.
Hardware, Finishes, And Installation Labor in the Quote
Hardware and finishing add visible costs. A full hardware kit including hinges, knobs, and strike plates runs $20-$150. Finishing (paint or stain plus sealant) adds $50-$400. Labor for installation typically covers removal of old door, fitting the prehung unit, shimming and aligning, and sealing, averaging $150-$700 per door. Complexities like multiple doors or high ceilings increase labor substantially.
Assumptions: standard hinges and hardware included with new door, no custom milling.
Regional Price Variations Across the United States
Prices vary by region due to labor rates and material availability. In the Northeast, interior doors may run 5-10% higher on average; in the Midwest, labor tends to be lower by 5-15% versus the national average; the West Coast can see 10-20% higher material and labor costs. A typical exterior door with installation might be $1,200 in the South versus $1,600 in the Northeast. Budget planning should adjust by region and trade demand.
Assumptions: urban to suburban markets, standard weatherproofing requirements.
Labor Time And Crew Size For Common Door Replacements
Most single-door replacements take 2-6 hours for a straightforward install, with a two-person crew common on exterior jobs. Labor rates vary by region but commonly fall in a $75-$125 per hour range per tradesperson. A basic interior door with standard jamb, hardware, and finish typically lands near $200-$350 in labor, while exterior installations with weatherproofing can reach $400-$1,000. Scheduling constraints and access can add days to project timelines.
Assumptions: standard job site, normal weather, no structural repair.
Full Door Unit Versus Door Slab: When Each Makes Sense
A full prehung door includes frame, hinges, weatherstripping, and hardware-ready installation; a door slab requires frame work and hardware transfer. Slabs are cheaper upfront but add installation risk and potential frame costs. For a single interior door, a slab might cost $80-$150 plus labor, while a full unit bundles $180-$350 for the same size. Exterior variants magnify the difference with frame and weatherproofing. Choosing between slab and full unit can change overall price by hundreds of dollars.
Assumptions: standard 80-inch door, single opening, no structural modification.
Additional Services That Affect Total Cost
Disposal, trim work, and weatherproofing add to the bottom line. Hauling away old doors typically adds $25-$150, while trim and casing adjustments range $50-$250. Weatherstripping, threshold upgrades, and sill repairs can push exterior replacements another $100-$300. If a contractor must perform drywall or frame repairs, expect higher totals. Always ask for itemized quotes to avoid surprise charges.
Assumptions: no structural remediation, standard trim profiles.