Florida homeowners typically pay $1,200-$3,500 to rescreen a pool cage, with a common project averaging about $2,200. The cost depends on screen area, mesh type, cage height, access, and whether damaged spline or hardware also needs replacement.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Standard full-cage rescreen | $1,200 | $2,200 | $3,500 | Typical residential enclosure |
| Screening per sq ft | $1.50 | $2.50 | $5.00 | Mesh and labor; specialty mesh costs more |
| Single panel repair | $75 | $150 | $300 | Height and access affect price |
| Large or elevated cage | $3,000 | $4,500 | $7,000+ | May require lifts or extensive setup |
What a Florida Pool Cage Rescreen Usually Costs
A standard full rescreen commonly falls between $1,200 and $3,500 for a typical one- or two-story pool enclosure. A reasonable planning average is about $2,200, assuming standard fiberglass mesh, ordinary access, and no structural repairs.
Contractors may estimate using the screen area rather than the pool deck footprint. Standard mesh installation often works out to roughly $1.50-$3.50 per square foot of screened surface. Assumptions: Florida labor rates, standard fiberglass mesh, sound aluminum framing, and normal access.
For a typical home, budget around $2,200 for a complete standard-mesh rescreen. Large cages, steep roof panels, coastal exposure, or specialty mesh can push the total above that range.
How Mesh, Labor, and Spline Shape the Quote
A rescreening quote usually combines mesh, removal and installation labor, and smaller consumables. Confirm whether the estimate includes hauling away old screen and replacing worn spline, the rubber cord that holds mesh in the frame.
| Quote component | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Standard mesh | $0.20-$0.60 | Per sq ft, material | Fiberglass grade and color |
| Specialty mesh | $0.60-$1.50 | Per sq ft, material | No-see-um or pet-resistant weave |
| Installation labor | $75-$125 | Per crew hour | Height, panel count, access |
| Spline and supplies | $50-$250 | Per project | Frame length and condition |
| Removal and disposal | $100-$400 | Per project | Old screen volume and haul distance |
Labor and access commonly account for the largest share of a full-cage quote. Ask for a written breakdown so material upgrades are not confused with labor or disposal charges.
Which Cage Dimensions and Mesh Specs Raise the Price?
Screened surface area is a primary cost driver: a compact enclosure with under 1,000 square feet of screen may cost $1,000-$2,000, while a large cage exceeding 2,000 square feet can reach $3,000-$5,000 with standard mesh. These are planning ranges; roof geometry and panel count also matter.
Mesh choice changes both material expense and installation effort. No-see-um mesh with a tighter weave may add $300-$900 to a typical job, while pet-resistant mesh can add $500-$1,500. Tall wall panels or roof sections above roughly 10-12 feet may require extra crew time or specialized access equipment.
Measure screened surface area and identify mesh specifications before comparing bids. A quote for “a pool cage” is difficult to compare unless it states the mesh type, included panels, and whether spline replacement is covered.
Can One-Panel Repairs Beat a Full Rescreen?
Replacing a few damaged panels can make sense when the remaining mesh is in good condition. A ground-level panel often costs $75-$150, while a high roof panel may be $150-$300 or more because of access and setup. Contractors may charge a minimum service fee even for a small repair.
If many panels are brittle, discolored, or tearing at the edges, repeated repairs can approach the price of full rescreening. For example, repairing eight panels at $125 each costs about $1,000 before any service minimums, while a modest full-cage job may start near $1,200.
Compare the repair total with a full rescreen when several panels need replacement. A contractor can check whether frame damage, loose fasteners, or corroded components make screen-only work temporary.
How Florida Location and Storm Access Affect Pricing
Labor and availability vary across Florida. In dense coastal markets, quotes may run about 10%-20% above less busy inland areas, particularly when contractor demand is high or access is difficult. Rural locations can also cost more if travel and equipment delivery add time.
Storm damage can create a surge in demand, and urgent scheduling may carry a premium of roughly 10%-25% when crews are scarce. After a named storm, some contractors may prioritize structural inspections or insurance-related work before routine rescreening.
Get comparable written quotes before peak storm-repair demand when the work is not urgent. Prices depend on local availability and job details, so regional percentages are estimates rather than fixed surcharges.
How Long Florida Crews Need to Rescreen a Cage
A typical two-person crew may finish a standard enclosure in one to two days, or roughly 10-16 labor hours. A large two-story cage can require two to four days, especially if roof panels are difficult to reach or the enclosure has many separate sections.
Labor rates often range from $75-$125 per crew hour, but companies usually quote the complete project rather than billing an hourly rate. Setup, screen removal, careful tensioning, cleanup, and weather delays all affect the schedule.
Ask whether the schedule assumes clear access to the pool cage and furniture moved away from work areas. Customer preparation can reduce interruptions, but elevated work and rain exposure remain contractor-managed tasks.
Three Florida Rescreen Quotes With Different Scopes
A 900-square-foot screened surface with standard fiberglass mesh, ground-level access, and no hardware repairs might total $1,500-$2,100. At an estimated 10-12 crew hours, this is a lower-complexity full rescreen.
A 1,500-square-foot cage with no-see-um mesh, spline replacement, and 14-18 labor hours might total $2,700-$3,800. A 2,400-square-foot, two-story enclosure with premium mesh, lift access, and 24-32 labor hours could reach $4,500-$7,000.
These examples show why a higher total may reflect more screen area or access work rather than a higher basic rate. Compare each quote by square footage, mesh, labor scope, and included repairs.
Which Rescreen Choices Can Lower the Final Bill?
Standard fiberglass mesh is usually the least expensive choice and works for many households. Choose no-see-um or pet-resistant mesh for specific needs rather than upgrading every panel by default; ask whether a targeted upgrade is practical for selected openings.
Move furniture and clear access before the crew arrives, but leave ladder, roof, and frame work to qualified installers. Compare at least three itemized quotes with matching mesh specifications, removal, spline, disposal, and warranty terms. Avoid choosing solely by the lowest total if the scope excludes difficult roof panels.
Matching the mesh and written scope across bids is the most reliable way to find a lower comparable price. Confirm that any claimed warranty states what is covered and for how long.