The cost to reside a house with vinyl siding varies by home size, siding quality, and regional labor rates. This article explains the typical price to reside a house with vinyl siding, including low, average, and high ranges, and highlights the main drivers behind those numbers. Readers will find concrete per-square-foot estimates and practical ways to trim expenses.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Total project price | $4,500 | $9,500 | $18,000 | Based on 1,200–1,800 sq ft homes, standard vinyl, mid-range installation |
| Per-square-foot installed | $2.75 | $5.50 | $9.00 | Depends on weather, trim, and accessories |
| Labor per hour | $40 | $70 | $95 | Regional variance; includes crew and cleanup |
| Materials per sq ft (vinyl siding) | $1.25 | $2.50 | $4.50 | Includes panels, underlayment, and needed fasteners |
| Replacement soffit/fascia | $800 | $2,000 | $4,000 | Often bundled with residing |
| Removal and disposal | $500 | $1,500 | $3,000 | Depends on debris and old siding condition |
Assumptions: Midwest labor rates, standard vinyl siding, normal access, and typical two-story home.
Understanding Typical Vinyl Siding Residing Costs by House Size
The price to reside a house with vinyl siding scales with exterior area. For a 1,000–1,200 sq ft one-story home, expect around $4,500–$7,500. For a 1,500–1,800 sq ft two-story, ranges commonly fall between $8,000 and $14,500. Larger homes or curved surfaces raise the price per square foot due to longer install times and trim work. Cost will rise with premium vinyl textures and 5-inch or 6-inch exposure patterns.
Major Cost Components in Vinyl Siding Residing
Quote breakdowns typically separate Materials, Labor, and Equipment, with optional items like permits or disposal. The table below shows common cost drivers and ranges.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $1.25/sq ft | $2.50/sq ft | $4.50/sq ft | Vinyl siding, underlayment, flashing |
| Labor | $2.00/sq ft | $3.50/sq ft | $5.50/sq ft | Crew size, access, weather |
| Equipment | $0.25/sq ft | $0.50/sq ft | $1.00/sq ft | Scaffolding, ladders, power tools |
| Disposal | $0.15/sq ft | $0.40/sq ft | $0.75/sq ft | Old siding and debris |
| Permits/inspections | $100 | $350 | $800 | Depends on local rules |
| Trim, corners, and fascias | $1,000 | $2,000 | $3,500 | Typically bundled |
Assumptions: standard 1,200–1,800 sq ft home, mid-grade vinyl, normal access.
What Variables Most Impact the Final Price
Two key drivers often shift cost beyond base estimates. First, roofline complexity (gable ends, dormers) adds trim and labor hours. Second, region matters: the same job in the Northeast can be 10–20% higher than in the Southeast due to crew availability and weather windows. Long run time and seam work on corrugated surfaces can push total cost toward the high end.
Material Type, Texture, and System Type Drive Your Quote
Standard vinyl with basic textures tends to be the least expensive option, while premium laminated finishes and deeper textures cost more per square foot. If a linear metal drip edge or hidden-fastener system is desired, prices rise. For larger homes with insulated vinyl siding, expect a premium per square foot but potentially better long-term energy savings. System type and insulation layer are major price levers.
Region and Climate: How Location Shifts Price
Markets in coastal or high-cost metro areas often quote higher labor rates and disposal costs. Rural markets may offer lower hourly rates but longer travel time. A realistic regional delta is about 5–15% on average versus national baselines, with spikes of 20% or more for peak-season demand. Choose timing to capture lower regional pricing where possible.
Labor Hours, Crew Size, and Scheduling Windows
Labor is usually the largest single cost factor. A two-person crew may complete a 1,400 sq ft house in 4–6 days under normal conditions, translating to $4,000–$8,000 in labor depending on local rates. Delays due to weather or unexpected repairs can add $1,000–$2,000. Booking in shoulder seasons tends to reduce scheduling fees in some markets.
Seasonal Price Changes and Availability
Prices often shift with demand. Spring and fall are common busy periods; summer heat or winter cold can slow progress and raise labor costs. If a contractor anticipates delays, they may include a contingency fee around 5–10% of project cost. Timing can meaningfully affect final price.
Practical Ways to Reduce Residing Costs
Control scope to stay within budget by limiting color changes, maintaining existing trim where feasible, and avoiding premium textures on standard homes. Compare quotes with similar material grades, bundle fascia and soffit work, and schedule work in non-peak seasons when possible. If older trim requires extensive repair, replacing it during the siding project may save separate trip charges. Smart scope management lowers total expenditure.
Real-World Quote Scenarios by House Size
Three example quotes illustrate typical ranges for common layouts. The numbers reflect mid-range vinyl siding with standard installation, basic underlayment, and standard removal and disposal.
- 1,000 sq ft one-story home: $4,500–$7,000 total, $4.50–$7.00 per sq ft
- 1,400 sq ft two-story home: $8,000–$12,500 total, $5.70–$8.90 per sq ft
- 2,000 sq ft two-story home with insulated vinyl: $12,000–$18,000 total, $6.00–$9.00 per sq ft
Assumptions: standard climate, normal access, no unusual architectural features.
Mini Formula For Quick Budget Checks
Estimated price = (S x R) + (Int) + (Dis) where S = square feet, R = rate per sq ft for materials plus labor, Int = insulation or premium features, Dis = disposal charges.