The cost of a Rheem furnace is typically $3,500-$7,500 installed, with an average near $5,500 for a standard gas furnace replacement. The final price depends on furnace capacity and efficiency, ductwork condition, local labor rates, and whether removal or code upgrades are needed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed gas furnace | $3,500 | $5,500 | $7,500 | Standard replacement, equipment and labor |
| Rheem furnace equipment | $1,500 | $2,700 | $4,500 | Model, capacity, and efficiency affect price |
| Installation labor | $900 | $1,500 | $2,500 | Higher for difficult access or system changes |
| Removal and disposal | $100 | $250 | $500 | May be included in a replacement quote |
Installed Rheem furnace prices by replacement scope
For a like-for-like replacement in a typical U.S. home, a standard-efficiency Rheem gas furnace commonly costs $3,500-$5,500 installed. A higher-efficiency two-stage or variable-speed system generally runs $5,000-$7,500, while complex installations can exceed $8,000. These estimates assume an existing furnace location, usable ductwork, and no major electrical or venting changes.
Budget about $5,500 for a straightforward midrange replacement, not just the furnace itself. Equipment-only prices often range from $1,500-$4,500 before contractor markup, installation, permits, and startup testing. A furnace size around 60,000-100,000 BTU is common in many homes, but a contractor should size the system from a load calculation rather than the old unit’s label.
Assumptions: standard natural-gas furnace, existing ductwork, normal access, and midrange U.S. labor rates.
What the Rheem furnace quote pays for
Quotes may bundle parts and labor, so homeowners should ask for an itemized estimate. The ranges below represent common replacement charges; a contractor may combine or rename line items.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Furnace and controls | $1,500-$4,500 | Per unit | Efficiency, capacity, staging |
| Removal and disposal | $100-$500 | Per job | Access and local disposal fees |
| Installation labor | $900-$2,500 | Per job | Hours, crew, system alterations |
| Venting, gas, or electrical updates | $150-$1,500 | Per job | Existing connections and code |
| Permit and inspection | $50-$400 | Per permit | Municipality and project scope |
Check whether the quote includes commissioning, thermostat setup, permits, and haul-away. A low equipment price may not include these charges or the adjustments required to connect a new furnace safely.
How BTU capacity and AFUE change the Rheem price
Capacity and efficiency are major price drivers. Moving from a 60,000-BTU furnace to a 100,000-BTU model can add roughly $300-$900, although the correct size depends on the home and climate. A 95% AFUE furnace typically costs more than an 80% AFUE model because it needs different venting and condensate drainage; the equipment and installation difference may be $500-$1,500.
Two-stage and variable-speed models can add another $500-$1,800 compared with a basic single-stage setup. These features may improve comfort and reduce temperature swings, but payback depends on fuel prices, operating hours, and the home’s insulation. Existing ductwork that is undersized, leaky, or incompatible can add $300-$2,000 or more.
Confirm the proposed BTU rating and AFUE before comparing bids. For labor estimates, a common planning range is 8-12 hours at $75-$150 per technician-hour, with crew size and market rates affecting the total.
When Rheem furnace installation takes more labor
A direct replacement may take one workday, often with a two-person crew. Installation can take longer when the furnace is in a tight attic or crawlspace, the flue must be changed, or condensate drainage and electrical connections need upgrades. These conditions can add $300-$1,500 in labor and materials.
Ask the installer to identify unusual work before signing the quote. A site visit can uncover access limits or venting changes that are easy to miss in a phone estimate. Confirm whether the quoted labor includes startup testing, thermostat wiring, and removal of the old unit.
Regional Rheem furnace quotes from rural to urban markets
Labor and contractor overhead vary by location. A comparable installation may cost 10%-20% less in lower-cost rural markets than in major coastal cities; dense metro areas can run 10%-25% above a national midrange estimate. Weather-driven demand can also affect appointment availability and pricing during cold snaps.
Compare local quotes using the same furnace capacity, AFUE, controls, and included work. A $6,000 bid is not directly comparable with a $4,500 bid if one includes new venting, a permit, or a longer labor warranty. Rates also vary within the same state, so local written estimates are more useful than a national average.
Removal, venting, and other Rheem replacement add-ons
Old-furnace removal commonly costs $100-$500 if it is not included. New PVC venting for a high-efficiency unit may add $200-$800, while a gas-line or electrical adjustment can add $150-$700. Duct repairs may cost $300-$2,000, and a new programmable thermostat can add $100-$400 installed.
Separate required code or safety work from optional upgrades. Ask for the reason and price of each add-on, especially when a quote includes duct modifications or a new thermostat. Permit charges are often modest, but local rules can require inspection or related upgrades.
Three Rheem furnace quotes with different specifications
| Example | Specifications | Labor and scope | Total estimate |
|---|---|---|---|
| Basic swap | 80% AFUE, 60,000 BTU | Two technicians, 8 hours; removal included | $3,800-$5,000 |
| Midrange replacement | 96% AFUE, 80,000 BTU, two-stage | Two technicians, 10 hours; venting adjustment | $5,200-$7,200 |
| Complex upgrade | 96% AFUE, 100,000 BTU, variable speed | Two technicians, 12 hours; vent and duct work | $7,000-$9,500 |
These examples are planning ranges, not manufacturer-set prices. Equipment availability, local permit rules, and contractor labor rates can shift the final total. A written quote should state the model number and list any changes to ducts, venting, gas piping, or electrical service.
How to lower a Rheem furnace replacement quote
Get at least three itemized bids and compare equivalent model tiers and scope. Keep usable ductwork and a compatible thermostat when inspection confirms they are in good condition. Avoid paying for a larger furnace or premium controls without a documented sizing or comfort reason.
Control the scope before choosing the lowest bid. Scheduling outside peak winter demand may improve availability, though savings are not guaranteed. Ask whether removal, permit fees, startup testing, and warranty labor are included, and compare the total installed price rather than equipment-only pricing.