Aluminum fascia wrap typically costs $6-$14 per linear foot installed, or about $1,200-$2,800 for 200 linear feet. The final price depends on fascia condition, roof access, trim complexity, local labor rates, and whether old material or damaged wood must be removed or repaired.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed aluminum fascia wrap | $6 per linear ft | $9.50 per linear ft | $14 per linear ft | Standard coil stock and straightforward access |
| 200-linear-foot project | $1,200 | $1,900 | $2,800 | Before extensive wood repair or upgrades |
| Wood fascia repair | $8 per linear ft | $18 per linear ft | $35 per linear ft | Typically added where rot or splitting is found |
What 150 to 250 Linear Feet Usually Costs
For a typical one- or two-story home with 150-250 linear feet of fascia, a basic wrap job often totals $900-$3,500. A common 200-foot project with standard white or brown aluminum and sound underlying boards is about $1,900. Larger homes, multiple roof levels, and decorative trim push the total upward.
Installed pricing generally includes field measuring, cutting and bending coil stock, fastening, and cleanup. Custom colors, unusually wide fascia, and detailed corners can raise the rate to $10-$18 per linear foot. Assumptions: U.S. national pricing, standard painted aluminum, accessible roof edges, and fascia boards that are structurally sound.
The most useful first estimate is the home’s measured fascia length multiplied by $6-$14 per linear foot. Contractors may quote by the project rather than show a separate per-foot rate, so the written estimate should state the measured footage and included work.
How Coil Stock, Labor, and Repairs Shape the Quote
Materials are only part of the price. Labor includes measuring each run, forming the aluminum to fit, and finishing joints and corners. Repair charges can matter more than the wrap itself if the wood beneath the metal is soft or water-damaged.
| Quote component | Typical price | What changes it | Usually included |
|---|---|---|---|
| Aluminum coil stock and trim | $1.50-$4 per linear ft | Gauge, color, width, and waste | Basic painted stock |
| Installation labor | $3-$8 per linear ft | Roof height, corners, and access | Forming and fastening |
| Wood repair | $8-$35 per linear ft | Rot depth and replacement scope | Usually billed separately |
| Removal and disposal | $1-$4 per linear ft | Existing wrap and disposal volume | Not always included |
| Lift or access equipment | $150-$600 per job | Height and site constraints | May be a separate charge |
Ask whether the price covers old-wrap removal, disposal, and wood repair, because these are frequent quote exclusions. A labor estimate can be checked with ; crew rates commonly work out to about $50-$100 per worker-hour, though contractors may price the whole installation instead.
Why Board Width, Roof Height, and Rot Change the Rate
Fascia width affects how much coil stock must be formed. A standard board around 6 inches wide is usually less costly to cover than an 8- to 12-inch board, which may require wider stock, extra bending, or a more involved drip-edge detail.
Roof height and shape also matter. One-story eaves with long, straight runs are generally quicker than two-story edges or roofs with many gables, short returns, and outside corners. A home with more than 250 linear feet may receive a lower per-foot rate on simple runs, while small jobs can face a minimum charge of roughly $400-$800.
Underlying wood condition is a major uncertainty. If damage is limited to a few feet, repair may add $8-$35 per affected linear foot. If more than 10%-15% of the fascia is rotten, replacing longer runs before wrapping may be more practical than covering damaged boards. Aluminum conceals the wood, but it does not correct rot or water entry.
Regional Labor Rates and Difficult Roof Access
In lower-cost rural markets, straightforward installation may land near $6-$9 per linear foot. Many suburban and mid-cost markets fall around $8-$12, while high-cost metro areas may reach $11-$18, especially with steep roofs or limited access. These are planning ranges rather than fixed regional prices; local contractor availability and job size can shift them.
Steep pitches, narrow side yards, landscaping, and overhead obstacles can require extra setup or a lift. A two-story home may add 10%-25% compared with an otherwise similar one-story project. Compare estimates from contractors who have measured the same runs and inspected the same access conditions.
How Long Installation Takes and What Slows the Crew
A two-person crew may wrap 150-250 linear feet in about one to two working days when fascia is sound and the runs are accessible. Detailed gables, multiple stories, and repairs can extend the job to two or three days. Weather can also delay work because exposed roof edges and ladder or lift use are safer in dry, manageable conditions.
Labor pricing varies by market and crew structure. Some installers use a per-foot rate; others calculate hours and materials internally. If a contractor lists hourly charges, confirm whether setup, travel, and cleanup are included. Extra time spent cutting around corners and roof returns is a common reason two similar-length jobs receive different quotes.
Removal, Disposal, and Fascia Repairs That Add Cost
Covering existing aluminum may be possible if it is secure and the new profile fits, but loose, dented, or layered wrap often needs removal. Removal and disposal can add about $1-$4 per linear foot. Contractors should explain whether they will inspect the wood after removal and how they will price concealed damage before proceeding.
Replacing a damaged board is separate from wrapping. Small repairs may cost $100-$400, while extensive replacement can add several hundred dollars or more, depending on lumber, access, and footage. Gutter removal and reinstallation can add roughly $3-$8 per linear foot if gutters block the fascia work. Get approval terms in writing for hidden rot, gutter handling, and disposal before the crew starts.
Three Fascia Wrap Quotes for Different Home Sizes
A 140-foot, one-story ranch with straight eaves and sound boards could cost about $1,050-$1,400 at $7.50-$10 per foot. Two installers might finish in one day, with basic white coil stock and no removal included.
A 200-foot, two-story home with several gables might run $2,200-$3,200 at $11-$16 per foot. The higher rate reflects elevated access, additional corner work, and more setup; the estimate should identify any lift charge separately.
A 240-foot home with 25 feet of rotten fascia could total about $2,000-$3,500, combining $1,800-$2,900 for wrapping with roughly $200-$875 for repair. Actual repair pricing depends on how much board must be replaced and whether gutters or trim must be removed. Compare total scope, not just the advertised per-foot rate.
Which Fascia Wrap Choices Lower the Final Bill
Keeping the existing fascia when it is sound avoids removal and replacement charges. Choosing a standard in-stock color, scheduling a larger continuous run, and bundling fascia with nearby soffit or gutter work may reduce mobilization costs, although a bundle is not automatically cheaper.
Homeowners can clear access around the eaves and ask for separate prices for repairs, gutter removal, and decorative upgrades. Get at least three written quotes using the same footage, material color, and repair assumptions. Do not reduce the price by wrapping over soft wood or skipping needed flashing and water-management repairs.