A Craftsman 10-inch miter saw typically costs $150-$280 new, depending on whether it is a basic compound model or a sliding version with added capacity. The final price changes with model features, sales, local availability, accessories, and whether the saw is new, refurbished, or used.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New 10-inch saw | $150 | $210 | $280 | Basic compound through sliding models |
| Used saw | $50 | $100 | $170 | Price depends on condition and included parts |
| Replacement blade | $20 | $35 | $65 | Blade tooth count and finish affect price |
| Stand | $80 | $140 | $250 | Separate purchase unless included in a package |
| Basic setup and calibration | $0 | $25 | $75 | Often handled by the buyer; shop service varies |
What a Craftsman 10-inch saw usually costs
For a new Craftsman 10-inch miter saw, a practical budget is $150-$280 before tax. A basic compound saw is commonly near the lower end, while a sliding compound model with a wider crosscut capacity is more likely to reach the upper end. Retailers change prices frequently, so the model number and current sale price matter more than the brand name alone.
Most buyers should budget about $210 for the saw itself, before accessories and sales tax. This average assumes a new, corded model sold through a U.S. retailer, with standard warranty coverage and no stand included. A typical 6.5- to 7.5-inch crosscut capacity on a basic saw differs substantially from the wider cut available on some sliding designs; confirm the product specifications before comparing prices.
Used saws often list for $50-$170. A clean, tested saw with its blade, fence, blade guard, and wrench can justify a higher asking price than a unit missing parts. A bargain is less attractive if the saw has a damaged cord, uneven fence, worn pivot, or blade that does not return square. Marketplace prices also reflect local demand and whether the seller includes a stand.
Assumptions: U.S. retail pricing, standard corded 10-inch model, ordinary access to replacement blades, and no delivery charge.
How the blade, stand, and accessories change the quote
A saw’s shelf price is only part of the purchase budget. The largest additional expenses are usually a better blade, a stable work support, and dust collection. Some packages include one or more of these items; others advertise a low base price and sell accessories separately. Compare the exact contents of the box before treating two listings as equivalent.
| Purchase component | Low | Average | High | What changes the price |
|---|---|---|---|---|
| Saw body | $150 | $210 | $280 | Compound or sliding design, features, and sale |
| 10-inch replacement blade | $20 | $35 | $65 | Tooth count, finish quality, and intended material |
| Portable stand | $80 | $140 | $250 | Weight capacity, wheels, and extension supports |
| Dust collection accessories | $10 | $30 | $70 | Adapter, hose, and shop-vac compatibility |
| Clamps and work supports | $15 | $40 | $100 | Number, length, and material of supports |
A complete, portable setup can cost $275-$600 when the saw, stand, blade, and basic dust accessories are purchased separately. That range does not include a shop vacuum, lumber, or a dedicated workbench. A buyer who already owns a suitable stand and vacuum may keep the added cost below $50, while a mobile setup with a premium stand can add more than $200.
Blade choice is especially easy to overlook. The included blade may be adequate for rough framing cuts, but a higher-tooth-count blade can leave a cleaner edge on trim and finish lumber. Check the arbor size and maximum blade specifications listed for the saw before purchasing a replacement. A blade that does not fit the tool is wasted expense, even if its diameter is correct.
Which saw specifications move the price up
Sliding action is one of the clearest price differences. A sliding model uses rails to move the blade across wider stock, and typically costs more than a basic non-sliding compound saw. A buyer cutting trim, shelving, or wider boards may value the extra capacity; someone making repeated cuts on narrow boards may not need to pay for it.
Bevel capability, miter range, detents, laser or shadow-line features, and included accessories can also affect the price. Compare the model’s maximum crosscut at 90 degrees and at common angles, its bevel direction, and the depth of its fence. A 10-inch blade diameter alone does not guarantee that two models can cut the same board width or thickness.
Expect sliding action or extra capacity to add roughly $30-$100 over a comparable basic model when both are sold new. Retail promotions can narrow or reverse that difference, so use current model-specific listings rather than a general price estimate. A bundled stand may also make a higher sticker price the lower total cost.
Condition matters just as much in the used market. A tested saw that cuts square, holds its angle, and has an intact blade guard is more valuable than an untested unit. For a used purchase, check the fence alignment, table, rails on sliding models, cord, motor startup, and adjustment locks. A needed repair can erase the savings from a low price.
Assumptions: Price comparison is for 10-inch corded tools with similar condition and no unusually large bundle discount.
How regional store prices differ across the U.S.
Retail pricing is often more consistent nationally than contractor labor, but local inventory and promotions still affect the checkout total. Large retailers may discount a model to clear seasonal inventory, while a smaller hardware store may charge more but have the saw in stock for immediate pickup. Online prices can look lower until shipping or delivery fees are included.
As a planning estimate, metropolitan shoppers may see a 0%-10% premium when local selection is limited or delivery is needed. In smaller markets, the price can be 5%-15% higher than a widely advertised online sale if only one retailer stocks the model. These are comparison ranges, not fixed regional rates; a local promotion can make either market less expensive.
Compare the out-the-door total, not just the listed price. State and local sales tax may add roughly 0%-10% depending on the jurisdiction, and delivery can add $0-$50 for a boxed saw. Pickup is commonly free. Before driving to a store, verify that the advertised model number, package contents, and sale price apply to the local branch.
Online listings also require a check for seller identity and return terms. A third-party seller may offer a price outside the usual range, but the warranty, shipping time, and return cost can differ from a direct retailer purchase. For a used saw, local pickup avoids shipping expense and makes it possible to inspect the tool before payment.
Three realistic Craftsman saw purchase budgets
The following examples show how the same saw category can produce different totals. Prices exclude sales tax and assume ordinary availability. They are budgeting scenarios rather than quotes for a specific current listing.
| Scenario | Saw and scope | Estimated total | Budget detail |
|---|---|---|---|
| Basic garage use | New compound saw and included blade | $150-$190 | No stand; existing workbench and vacuum |
| Wider board cuts | New sliding model, upgraded blade, adapter | $235-$355 | Blade $30-$55; dust adapter $10-$30 |
| Portable job setup | New saw, wheeled stand, blade, supports | $350-$570 | Stand $150-$250; accessories $35-$90 |
The portable setup costs more because the stand and supports can approach the price of the saw. The basic example is the lowest-cost choice only when the buyer already has a stable surface and dust-control equipment. For occasional trim work, a portable stand may be unnecessary; for frequent work in multiple locations, carrying and setup time may matter as much as the purchase price.
For used purchases, a tested basic model at $70-$120 can be economical if it includes the essential parts and cuts accurately. If the unit needs a blade and repair, add $20-$65 for a blade and potentially more for service. The seller’s asking price should be weighed against the cost of a new model with a return policy and warranty.
When setup or repair adds labor charges
A homeowner who assembles the stand and checks the saw’s alignment may pay no labor fee. A retailer or repair shop may charge $25-$75 for basic inspection or calibration, depending on the service and local minimum charge. More involved diagnosis or repair can cost $75-$125 per hour, with parts extra. These services are not routinely necessary for every new saw.
For a buyer paying for shop service, a rough labor estimate uses . For example, 0.5-1.0 hour at $75-$125 per hour produces $38-$125 in labor before parts or shop fees. Ask whether the quote includes checking the fence, bevel angle, miter detents, blade condition, and safe operation.
Do not pay for calibration until the saw’s actual cut accuracy has been checked. A simple test cut on scrap material can reveal whether an adjustment is needed. If the saw is new and arrives damaged or cannot be aligned, contacting the retailer or manufacturer may be less costly than hiring an independent repair shop. Keep the receipt and model information available.
Delivery and assembly can add cost when the saw is purchased as part of a larger shop setup. A single boxed saw is generally manageable for store pickup, while a heavy stand or bundled workbench may prompt a delivery charge. Clarify whether delivery includes placement, assembly, or only drop-off; those services are not always part of the same fee.
How a 10-inch model compares with other options
A 10-inch saw is often priced below larger 12-inch models, but the lowest price is not always the lowest cost for the work. A 12-inch saw may handle wider or thicker stock in some configurations, while replacement blades can cost more. Confirm the capacity required by the actual project before paying for a larger tool that may be unnecessary.
A used saw or a basic non-sliding model can reduce the initial outlay, but a sliding saw may prevent extra handling or multiple cuts on wider boards. For occasional small trim jobs, renting a saw may cost about $30-$70 per day, depending on location and tool class. For repeated use, several rental days can approach the cost of a new entry-level saw.
Choose by required cut capacity and expected use, not blade diameter alone. A 10-inch saw can be a reasonable middle ground for household projects, but the model’s specified cut width and bevel features determine whether it suits the material. Compare the total cost of ownership, including blades and stands, against renting or buying used.
Hand tools can cost less for a small number of simple cuts, but they require more time and may not provide the repeatability needed for trim work. A table saw is not a direct substitute for every angled crosscut. When comparing alternatives, include the cost of accessories already owned, setup time, and whether the tool can safely handle the stock dimensions involved.
Ways to lower the price without losing needed capacity
Start by deciding whether a sliding rail, stand, or premium blade is necessary for the planned cuts. If most pieces are narrow, a basic compound model may meet the need at a lower price. If the saw will stay in one garage location, a sturdy bench can replace a separate portable stand and save $80-$250.
The most reliable savings come from avoiding accessories that duplicate equipment already on hand. Check the package contents for a blade, wrench, clamp, and dust bag before ordering extras. A shop vacuum and compatible adapter may be sufficient for occasional cutting, while a dedicated dust extractor is a larger expense that may not be justified for a few projects.
Compare at least three offers using the exact model number, not only the Craftsman name. Include shipping, tax, return terms, and stand or blade inclusions. Retail sale periods and clearance listings can bring a new basic saw toward $130-$160, but a low listing deserves a check for discontinued status, missing parts, or third-party selling terms.
When buying used, inspect the saw in person and test it on scrap if the seller permits. Confirm that the fence is straight, the blade guard moves freely, the table and rails are undamaged, and the adjustment locks hold. A $100 saw that needs a $60 repair may be a worse deal than a new model priced at $170 with a warranty.
Assumptions: Savings estimates exclude tax and depend on local inventory, model availability, and whether the buyer already owns compatible shop equipment.