A Craftsman 2800 PSI pressure washer typically costs about $250-$400 new when available, with used units commonly listed around $75-$250 depending on condition and included accessories. The final price depends on the exact model, engine and flow rate, retailer availability, delivery, and whether the washer needs repairs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New gas washer | $250 | $325 | $400 | Comparable 2,800 PSI models; price varies by retailer and stock |
| Used working unit | $75 | $150 | $250 | Condition, age, and accessories affect resale value |
| Basic repair | $40 | $100 | $200 | Small parts or service; major pump work can cost more |
| Replacement spray tip set | $10 | $20 | $35 | Compatible tips, depending on kit and material |
Assumptions: U.S. prices before sales tax; standard consumer-grade gas model, with no unusual delivery or repair needs.
What a 2,800 PSI Craftsman washer usually costs
For a new Craftsman gas pressure washer rated around 2,800 PSI, a practical budget is $250-$400, with roughly $325 as a middle estimate when a comparable model is in stock. Prices can vary because Craftsman models and retailer listings change over time. The rating alone does not identify the exact model or guarantee that a particular unit is currently sold.
Many consumer gas washers in this class deliver about 2.3-2.5 gallons per minute (GPM) and use a small gasoline engine. Buyers should compare both pressure and flow: PSI indicates water pressure, while GPM affects how quickly the washer can rinse a surface. A similar PSI rating with lower flow may not perform the same way.
For a new unit, budget about $250-$400 before tax; for a used one, condition matters more than the printed PSI rating. Confirm the model number on the product label and compare its engine, GPM, hose, included tips, and warranty before treating another washer as an exact match.
How the engine, hose, and accessories shape the quote
The shelf price covers the washer, but a used purchase or a repair estimate can include separate charges for service, missing parts, or delivery. A washer that starts and runs may still need a new hose, spray gun, or pump component. The ranges below are budgeting estimates, not fixed Craftsman service rates.
| Cost item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Washer unit | $250-$400 | Per new unit | Model, retailer stock, promotions |
| Labor for diagnosis or repair | $50-$150 | Per service visit | Shop minimum, repair complexity |
| Hose, gun, or wand | $20-$80 | Per replacement part or set | Length, fittings, compatibility |
| Spray tips | $10-$35 | Per set | Kit size and tip material |
| Pickup or delivery | $0-$60 | Per trip | Retailer policy and distance |
Some service shops charge a diagnostic or minimum labor fee even if the owner declines the repair. Ask whether the estimate includes testing, parts, and tax, and whether the shop will apply the diagnostic fee toward completed work. For a repair, labor can be estimated with .
A quote should separate labor from parts and identify whether the pump, engine, or only an accessory is being repaired. A $30 hose replacement is a different purchase decision from a $150 pump repair on an older machine.
Why engine size, GPM, and pump condition change the price
Model specifications and mechanical condition can move a washer’s value substantially. A 2,800 PSI label does not reveal the engine’s displacement, pump design, or water flow. Check the model plate and manual, especially when buying used, because similar-looking Craftsman machines can have different parts and specifications.
Flow is one useful comparison point. A unit delivering about 2.3-2.5 GPM is generally a different proposition from a lower-flow washer, even if both advertise similar pressure. A longer hose or more complete accessory kit can also add value, while a missing wand or damaged high-pressure hose lowers the practical value of a used listing.
Condition thresholds matter. A machine that starts easily, holds pressure, and has no water or oil leaks may justify a higher used price than one with uncertain storage history. If it surges, loses pressure, or leaks at the pump, budget for diagnosis before purchase. A repair that approaches $150-$200 can make a $75-$150 used unit a poor bargain.
For a used washer, test it under pressure and inspect the pump and hose before paying near the top of the resale range. Ask the seller to demonstrate cold starting, steady spray, and normal shutdown; do not rely only on a claim that it ran the previous season.
Can repair cost less than replacing the pressure washer
Minor fixes can be economical when the engine and pump are sound. Replacing a worn spray tip, hose, or seal may cost $10-$80 in parts, with labor added if a shop performs the work. Fuel-related starting issues may also be inexpensive to address, but a technician should diagnose repeated stalling rather than assuming it needs a new engine.
More extensive pump or engine work can reach $150-$300 or more, depending on parts availability and labor. That amount can exceed the value of an older consumer washer, particularly if the machine also needs a hose or gun. Replacement becomes more reasonable when the repair estimate approaches half the price of a comparable new unit and the washer has multiple problems.
When comparing a replacement, look at the whole package: PSI, GPM, engine, hose length, warranty, and included nozzles. A lower sticker price may not be the lower total cost if the required accessories are missing. Conversely, a premium upgrade may not be worthwhile for occasional patio or vehicle cleaning.
Use a repair ceiling before authorizing work: if a quote nears $150-$200 on an aging unit, compare it with the cost of replacement. The right threshold depends on the machine’s condition and the cost of a true specification match.
Three realistic budgets for new, used, and repaired units
These examples show how the purchase price can change with condition and scope. They are planning scenarios rather than quotes for a specific store or repair shop. Sales tax is excluded because rates vary by location.
| Scenario | Unit or parts | Labor and extras | Estimated total |
|---|---|---|---|
| New washer, basic setup | $300-$350 | $0-$25 for delivery or fuel | $300-$375 |
| Used washer, tested and complete | $100-$180 | $0-$30 for pickup or small accessory | $100-$210 |
| Repair of working unit | $25-$75 in parts | $50-$125 diagnosis and labor | $75-$200 |
In the new-unit example, the buyer pays more upfront but receives a machine with a retailer return policy or warranty if offered. A used purchase at $100-$180 can be cheaper, but only if it starts reliably and includes usable accessories. In the repair example, the total assumes a relatively limited fix; a pump replacement or major engine repair may push the total beyond the listed range.
Compare totals, not just listing prices. A $120 used unit with a missing hose and uncertain pump may cost more in the end than a tested washer priced at $175.
Where U.S. buyers may see different prices
Pressure washer pricing can vary by store competition, regional demand, shipping, and seasonal stock. As a broad budgeting adjustment, buyers in high-cost metro areas may see service labor or delivery charges about 10%-25% above a national-style estimate. Smaller towns may have fewer repair shops, and travel or pickup fees can offset lower local labor rates.
Retail prices are often easiest to compare during spring promotions and end-of-season clearance, but availability can be limited. In warmer regions, demand may stay steady for longer; in colder areas, late-season markdowns can occur as retailers clear outdoor equipment. These patterns are not guaranteed, and a specific model may be discontinued or unavailable at any price.
For repairs, ask local shops whether the quoted fee includes transportation and testing. A $75 labor estimate may not be the lowest total if there is a separate $40 pickup charge. For a new purchase, compare the delivered price with the price of collecting the unit locally.
Use local quotes for repair labor and delivered pricing rather than applying one national price to every market. A 10%-25% regional adjustment is a planning range, not a guaranteed markup.
Ways to lower the Craftsman 2,800 PSI price
First, confirm the exact model and compare only machines with similar GPM, engine type, and included equipment. A lower price on a different specification is not automatically an equal substitute. If shopping used, request a running demonstration and check the hose, fittings, pump housing, and oil condition before agreeing on a price.
Second, price accessories separately. If the washer is complete and only needs one compatible nozzle or hose, replacing that part may cost less than paying extra for a bundle of accessories. Check fitting compatibility against the manual or model information; forcing an incompatible connector can cause leaks or damage.
Third, compare the full purchase total, including delivery, tax, and any required maintenance. Avoid paying a premium for upgrades that do not match the intended workload. For a machine with a repair issue, get a written estimate before buying, and subtract the likely repair cost from the seller’s asking price.
The most reliable savings come from matching specifications, verifying condition, and negotiating from the cost of needed repairs. For occasional home use, a sound used machine can be economical; for uncertain or extensive damage, a new comparable unit may offer a more predictable budget.