Craneboard solid core siding typically costs about $8-$15 per square foot installed, with a midrange project around $12,000-$30,000 for 1,500-2,000 square feet of siding. The final quote depends on product availability, wall preparation, trim, removal of old siding, labor rates, and whether the home needs repairs or code-related upgrades.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed siding | $8 per sq ft | $11 per sq ft | $15 per sq ft | Labor and standard installation supplies included |
| Materials only | $4 per sq ft | $6 per sq ft | $9 per sq ft | Varies with profile, color, trim, and availability |
| 1,500 sq ft project | $12,000 | $16,500 | $22,500 | Before major wall repairs or extensive removal |
| 2,000 sq ft project | $16,000 | $22,000 | $30,000 | Approximate net siding area, not home floor area |
Assumptions: U.S. contractor installation, ordinary access, standard colors, and a sound wall surface. Craneboard is insulated vinyl siding with a rigid foam backing; quotes may vary because product lines, colors, and local inventory are not uniform. Confirm the exact product and included trim in writing.
Installed Craneboard prices for common wall areas
Contractors generally price siding by the square foot of exterior wall area, after accounting for openings and gables. A 2,000-square-foot house does not necessarily have 2,000 square feet of siding: its wall area may be roughly 1,500-2,200 square feet, depending on the layout, number of stories, roof shape, and window area.
| Net siding area | Low installed estimate | Typical estimate | High installed estimate | Typical scope |
|---|---|---|---|---|
| 1,000 sq ft | $8,000 | $11,000 | $15,000 | Small addition or limited wall replacement |
| 1,500 sq ft | $12,000 | $16,500 | $22,500 | Compact home with straightforward walls |
| 2,000 sq ft | $16,000 | $22,000 | $30,000 | Average-sized full exterior project |
| 2,500 sq ft | $20,000 | $27,500 | $37,500 | Larger home or more complex exterior |
A reasonable planning figure is about $11 per square foot installed, before unusual repairs or premium trim. These totals assume a typical installation with starter strips, corner pieces, standard openings, and ordinary job access. They are budgeting ranges, not a guaranteed price for a specific CraneBoard product or market.
What siding, labor, and trim add to the quote
A complete estimate should separate product, installation, and job-specific charges. Material pricing can be affected by profile, color, matching accessories, and whether the contractor can source the requested CraneBoard line. Ask whether the quote includes housewrap or other water-resistive barrier work and whether existing siding removal is included.
| Quote component | Typical price range | What changes the charge |
|---|---|---|
| Insulated siding and standard accessories | $4-$9 per sq ft | Profile, color, product availability, starter and finish pieces |
| Installation labor | $3-$6 per sq ft | Wall height, cuts, access, crew rates, and detailing |
| Trim and opening details | $5-$15 per linear ft | Window and door count, corner trim, and selected finish |
| Old siding removal | $1-$3 per sq ft | Existing material, number of layers, and disposal access |
| Wall sheathing or moisture repairs | $2-$8 per sq ft of repaired area | Rot, water damage, and extent of replacement |
Labor is commonly priced as part of a per-square-foot installation bid rather than as a separate hourly charge. For comparison, crew labor equivalent to $50-$100 per worker-hour can help explain a quote, but actual productivity and contractor overhead vary. Request line items for siding, labor, removal, trim, and repairs so allowances are not mistaken for fixed prices.
Wall height, foam thickness, and access shift costs
Several project details can push a quote away from the midpoint. A simple one-story wall with few corners is faster to cover than a two-story exterior with dormers, multiple gables, and many windows. Height can require additional staging or lift rental, while tight landscaping or limited driveway access can slow delivery and installation.
-
Wall area: At $8-$15 per square foot, a 300-square-foot difference in measured siding area changes the estimate by about $2,400-$4,500.
-
Stories and roof shape: Second-story walls, steep gables, and dormers may add roughly 5%-15% to labor compared with open, single-story walls.
-
Profile and color: Special colors or less common profiles may add $0.50-$2 per square foot, or take longer to source; confirm availability before setting the schedule.
-
Existing wall condition: Small localized repairs differ greatly from replacing sheathing across 200-300 square feet, which may add hundreds to several thousand dollars.
-
Insulation specification: Verify the exact foam backing and product configuration. A thicker or different insulation package can change both material cost and trim compatibility.
Measure the actual exterior wall area and identify repair allowances before comparing bids. Some contractors measure gross wall area while others deduct windows and doors; a consistent method makes per-square-foot prices more useful.
How removal and hidden repairs change the project total
Replacing existing siding adds more than the cost of the new product. Removing vinyl or wood siding, hauling debris, and preparing the wall may add $1-$3 per square foot for straightforward work. Multiple layers, brittle or difficult-to-remove material, or limited dumpster access can increase that range. Some contractors install over existing siding only when the substrate, moisture conditions, and local rules allow it.
Once the old covering is removed, installers may find damaged sheathing, failed flashing, or water intrusion around windows. Basic patching may cost $200-$800; broader sheathing and flashing repairs can add $1,000-$5,000 or more, depending on how many walls are affected. These are not automatic charges, so a quote should state how concealed damage will be documented and billed.
Other possible line items include housewrap at about $0.50-$1.50 per square foot, window or door flashing, replacement trim, and dumpster or disposal fees of roughly $300-$800. Keep a 10%-15% contingency available when the wall condition cannot be confirmed before removal. That reserve is a planning allowance, not a reason to accept unapproved extra work.
Regional labor rates and delivery affect U.S. bids
Installed prices can vary substantially by market. Compared with a typical suburban baseline, high-cost coastal metros may run about 15%-30% higher, while some rural markets may be 5%-15% lower. Those differences reflect wages, contractor availability, travel, disposal charges, and delivery distance, not necessarily a different siding specification.
In areas with older housing stock, labor for careful removal and wall repairs can outweigh the product-price difference. Rural locations may have lower hourly rates but higher freight charges or fewer installers familiar with insulated vinyl siding. In cold-weather regions, scheduling may be constrained by temperature and installation requirements; ask the contractor to confirm the product maker’s applicable instructions rather than assuming all vinyl can be installed the same way year-round.
Compare at least three local bids using the same wall-area measurement and product specification. Ask each company to identify travel or delivery charges, permit fees if applicable, and whether the quoted tax is included. A low per-square-foot rate may exclude removal, trim, or wall preparation and therefore may not represent the lowest total.
Three quote examples for different Craneboard jobs
The examples below illustrate how scope changes a project budget. The totals are estimates, not published manufacturer prices, and assume standard-quality installation. Actual measurements, local labor, availability, and repair findings can move the final quote.
| Example job | Area and rate | Other charges | Estimated total |
|---|---|---|---|
| Simple one-story replacement | 1,200 sq ft at $9 per sq ft | $1,200 removal and disposal | $12,000 |
| Typical two-story exterior | 1,800 sq ft at $11 per sq ft | $1,500 trim and $1,000 minor repairs | $22,300 |
| Complex home with gables | 2,300 sq ft at $14 per sq ft | $2,000 removal and $3,000 sheathing work | $37,200 |
For the middle example, the $11 per-square-foot rate covers standard installation, while trim and repairs are listed separately. If those items were already included in another contractor’s per-square-foot price, the apparent rate should be adjusted before comparing bids. Use the same inclusion list, not just the same total area, when judging quote differences.
Insulated vinyl versus standard vinyl and fiber cement
Standard vinyl siding often costs about $6-$11 per square foot installed, while insulated vinyl commonly falls around $8-$15. Fiber cement is often about $10-$18 per square foot installed, with heavier material and more demanding cutting and fastening contributing to labor. Regional rates and project details can put any of these options outside the ranges.
Compared with standard vinyl, solid-core insulated siding typically has a higher upfront price and a foam backing that helps make the panel feel more rigid. It should not be treated as a replacement for properly installed wall insulation, air sealing, or moisture management. Fiber cement offers a different appearance and material performance, but its weight and finishing requirements affect installation cost. Compare installed assemblies, warranties, and required trim rather than treating material price as the whole decision.
Repair may be less expensive than replacing every wall when damage is limited and a compatible panel can be found. A small repair might cost $300-$1,500, depending on access, matching, and the amount of trim or panel replacement. Older or discontinued colors can make a visually seamless repair difficult; request a sample or written note about expected color variation.
Keep the siding budget down with controlled scope
The largest controllable savings usually come from accurate measurements and a clear scope, not from skipping water-management details. Confirm the net wall area, count windows and doors, and ask whether corners, fascia, soffit, and garage walls are part of the bid. Excluding unrelated exterior work can make the siding quote easier to compare, while bundling closely related work may reduce repeat setup charges.
-
Choose standard stocked colors and profiles: This can avoid special-order charges or delays when the requested CraneBoard configuration is available locally.
-
Schedule before peak demand when practical: Ask whether a flexible start date changes labor pricing; do not assume an off-season discount is available in every climate.
-
Handle simple site preparation: Clear movable items and provide access where safe, but leave ladder work, electrical disconnection, and siding removal to qualified workers.
-
Separate essential repairs from upgrades: Require photographs and approval before extra sheathing or trim work proceeds. Avoid paying for unrelated replacement when the existing component is serviceable.
-
Compare warranties and exclusions: Check labor coverage, product coverage, moisture-repair exclusions, and who handles warranty service.
Do not reduce cost by omitting flashing, water-resistive barrier work, or manufacturer-required installation details. A lower initial bid can lead to additional charges or moisture problems if the scope leaves out necessary preparation.
Questions that clarify a Craneboard siding estimate
Before signing, confirm the product name, profile, color, foam backing, and whether the supplier has enough matching material for the full job. Since availability can vary, ask whether the estimate assumes a currently stocked item or a special order and whether substitutions require written approval. The proposal should also state the measured siding area and how waste is calculated.
Ask who removes and disposes of the old siding, whether housewrap and flashing are included, and how concealed damage is priced. Confirm payment milestones, workmanship warranty length, product warranty documents, cleanup, and the expected installation duration. A typical 1,500-2,000-square-foot project may take about 5-10 working days for a small crew, excluding major repairs or weather delays.
Permits for siding replacement depend on local rules and project scope. Straight replacement may not require the same approvals as structural changes, but a contractor should identify applicable permit and inspection charges in the quote. A complete written estimate should distinguish fixed work from allowances and explain how change orders are approved.