A Cub Cadet 28-inch mower typically costs about $900-$1,500 when available, with used examples often priced lower depending on age and condition. The final price depends on whether the mower is new or used, local availability, delivery, assembly, and the condition of its engine and cutting deck.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used mower | $300 | $650 | $1,000 | Older or worn units at the low end; maintained examples cost more |
| New or leftover stock | $900 | $1,200 | $1,500 | Price depends on dealer stock and whether the model is still sold |
| Delivery and setup | $0 | $75 | $200 | May be included in a dealer offer or charged separately |
| Basic service after purchase | $40 | $90 | $180 | Typical blade, oil, and inspection work, depending on service scope |
What a 28-inch Cub Cadet mower usually costs
The 28-inch Cub Cadet is generally identified with the CC 800 wide-area walk-behind mower. Its large cutting width is intended to cover more ground than a standard residential push mower while remaining smaller than a riding mower. Model year, dealer inventory, and condition matter because this mower may not be available as a current, regularly stocked product in every market.
A practical budget is $1,000-$1,400 for a new or leftover-stock unit, before optional delivery or service. Used prices commonly fall around $300-$1,000, with running condition, maintenance records, and deck damage driving the spread. These figures are U.S. planning ranges, not guaranteed dealer quotes.
Assumptions: standard residential use, normal access, and no major engine or deck repair.
How the deck, engine, and dealer fees shape the quote
A mower purchase price may bundle preparation and warranty support, or list those charges separately. Ask the seller for an itemized quote and confirm whether the mower is assembled, fueled, and ready to cut. For a used machine, inspect the blade, tires, drive system, and discharge or bagging equipment before comparing the sticker price.
| Quote component | Typical amount | What it covers | Price effect |
|---|---|---|---|
| Mower and cutting deck | $750-$1,250 | Core machine, engine, and 28-inch deck | Largest share of the purchase |
| Dealer preparation | $0-$100 | Assembly, inspection, and setup | Often waived or included in promotions |
| Delivery | $0-$150 | Transport to the home | Distance and dealer policy affect fee |
| Accessories | $25-$200 | Bag, cover, or replacement blade, if compatible | Optional; verify fit before purchase |
| Initial service | $40-$180 | Oil, blade work, and inspection | More likely on older used equipment |
Separate included equipment from add-ons so accessories do not make one quote look artificially cheaper. A low advertised price may omit delivery, setup, or a bagging attachment. If a dealer charges assembly labor, a simple estimate is .
How deck condition and engine hours change used prices
Condition is the biggest used-price variable. A mower with a clean deck, reliable starting, and smooth self-propel operation can command a substantial premium over a unit that needs repair. A bent deck, excessive vibration, smoke, or a slipping drive should prompt a repair estimate before purchase.
The 28-inch deck also changes the comparison: it is about 2.3 feet wide, so it may suit open lawns but can be awkward through narrow gates or around tight landscaping. Confirm the mower’s overall width, not just its cutting width, where access is limited. Engine hours are useful when documented, but maintenance records and a cold-start test are more meaningful than an hour reading alone.
A mower needing more than $250-$400 in immediate repairs may not be a bargain unless its purchase price is well below a verified running example. Request a written estimate for engine, blade, and drive-system work rather than assuming repairs will be inexpensive.
Will delivery and setup add much to the mower price?
Dealer delivery commonly adds $50-$150, though some sellers include it within a local service area. Setup may cost $0-$100 if charged separately. A used mower sold by a private party may avoid dealer fees, but pickup requires a vehicle or trailer that can safely accommodate the machine.
For maintenance or repair, small-engine shop rates often run about $75-$125 per hour, plus parts. A routine service can take roughly 1-2 hours, while diagnosing a drive or engine problem can take longer. Get authorization limits in writing before a shop begins troubleshooting an older mower.
New stock, used CC 800s, and smaller mowers compared
New or leftover stock can make sense when warranty coverage and dealer support matter, but discontinued or scarce inventory may carry a price premium. Used CC 800 listings can look attractive, yet shipping, pickup, and repairs can narrow the difference. Compare the exact model and included attachments rather than relying on a listing title alone.
A conventional 21-22-inch walk-behind mower often costs about $300-$800 new, while used units may be $100-$500. It may cost less but needs more passes over a large lawn. A riding mower is a different purchase category, often costing several thousand dollars new, and may be excessive if the property does not require one.
Compare cost per usable feature, not deck width alone. Check replacement-part availability and confirm the model number with a Cub Cadet dealer before paying a premium for an older machine.
Regional availability can shift the 28-inch mower quote
Prices can vary with dealer inventory, shipping distance, and local demand. In areas with limited stock, an available unit may cost about 5%-15% more than a comparable listing in a market with several sellers. Rural buyers may face higher transport charges, while dense metro areas can have more competing dealers but higher service labor rates.
Online listings should be compared with local out-the-door quotes that include tax and delivery. Sales tax varies by state and locality, so a $1,200 advertised mower may require another $60-$120 or more at checkout. Ask for the final payable price and the model year before traveling to inspect a mower.
Which purchase choices can lower the total
Buying during a dealer clearance period can help if leftover stock is available, but the discount should be weighed against warranty start dates and parts support. For used machines, a test cut and inspection are more valuable than a small price reduction on a mower with uncertain maintenance history.
Skip accessories that are not needed for the lawn, and compare pickup with delivery before accepting a transport fee. If the mower only needs routine maintenance, repair may cost less than replacing it; if the deck or engine needs substantial work, price a replacement before committing. Keep the purchase scope to the mower and required equipment, then compare at least two itemized quotes.