Delicatus White granite typically costs about $55-$100 per square foot installed, with a 35-square-foot kitchen countertop project commonly totaling $2,500-$4,500. Slab grade, layout and waste, edge details, sink cutouts, labor rates, and removal of old counters affect the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed countertop | $55 per sq ft | $75 per sq ft | $100 per sq ft | Fabrication and standard installation |
| 35-sq-ft kitchen | $1,925 | $2,625 | $3,500 | Before removal, tax, or major upgrades |
| Granite slab material | $30 per sq ft | $45 per sq ft | $65 per sq ft | Selection and local inventory affect price |
What a Delicatus White granite countertop usually costs
For a typical kitchen, a reasonable planning range is $2,500-$4,500 for about 35 square feet of Delicatus White granite, including templating, fabrication, and standard installation. Smaller bathrooms may cost $600-$1,500 because fabricator minimums can make a small job relatively expensive per square foot.
Budget roughly $55-$100 per installed square foot for a standard layout. A simple project with an in-stock slab and ordinary access may fall near the low end; a selected premium slab, complex seams, or upgraded edges can push the quote higher. Figures are estimates rather than fixed national prices.
Assumptions: U.S. pricing, standard 3-cm slab, normal access, one sink cutout, and no unusual structural work.
How slab, fabrication, and installation appear in quotes
Granite quotes may bundle work or list it separately. Ask whether the measured area includes backsplash, overhangs, and waste, and whether the selected slab is included. Delicatus White has a distinctive patterned appearance, so slab selection and matching across seams can affect both material use and labor.
| Quote item | Typical price | What it covers | Common cost change |
|---|---|---|---|
| Slab material | $30-$65 per sq ft | Granite and allocated slab area | Grade, finish, and availability |
| Fabrication | $15-$30 per sq ft | Cutting, polishing, and edge work | Complex profiles or seam planning |
| Installation labor | $10-$25 per sq ft | Delivery, setting, and seam work | Stairs, distance, or tight access |
| Cutouts and removal | $150-$500 each | Sink or cooktop cutout; old-counter removal may be extra | Material type and disposal needs |
Request an itemized quote that separates stone, fabrication, labor, and removal. This makes it easier to compare estimates that use different package pricing.
Why slab grade and countertop layout change the quote
Two Delicatus White slabs can differ in background tone, veining, and movement. A fabricator may charge more for a specific slab, a higher grade, or extra material needed to align the pattern. Ask to see the actual slab or slab photos before approving the order, particularly when the countertop has long runs or a visible island.
Area and layout matter too. A kitchen with 25-30 square feet of straight counter usually needs less stone and simpler fabrication than a 45-60-square-foot kitchen with an island, several corners, and long seams. A 3-cm slab is a common full-thickness choice; a 2-cm option may require a built-up edge, which can change fabrication charges.
Measure the finished counter area and confirm how much slab waste is included. Pattern direction, seam placement, sink position, and an overhang greater than about 12 inches can add planning or support requirements.
How long do granite installation labor and scheduling take
After a field template is made, fabrication commonly takes about 1-3 weeks, depending on the shop’s workload and slab availability. Installation often takes 4-8 hours for a typical kitchen crew, while a large kitchen or difficult access can take most of a day. The installer may need a separate visit to measure before cutting.
Labor estimates often translate to roughly $50-$100 per worker-hour, but many fabricators price by the job or square foot rather than showing an hourly rate. Confirm whether templating, delivery, sink mounting, and plumbing reconnection are included. Plumbing work may be quoted separately, often around $150-$400 depending on fixture changes and local rates.
How regional labor rates affect installed granite prices
Prices in major coastal metros and other high-cost markets can run about 15%-30% above a typical national estimate. Smaller cities and rural areas may be around 5%-15% below it, although fewer local fabricators can reduce competition or increase delivery charges. These comparisons are broad planning ranges, not guaranteed regional tariffs.
Local slab inventory, shop demand, and travel distance can matter as much as state averages. Compare quotes from fabricators that use the same slab thickness, edge profile, and project measurements. Compare the complete installed price rather than the advertised stone rate alone.
Which extras can add to a Delicatus White estimate
Old countertop removal may add roughly $5-$15 per square foot, with hauling or disposal sometimes charged separately. A standard sink cutout may be included or cost about $150-$300; a cooktop cutout, faucet holes, or unusual details can add charges. Full-height granite backsplash, if selected, may add about $20-$45 per square foot installed.
Edge choices can also change the total. A standard eased edge is often included, while decorative profiles may add about $10-$25 per linear foot. Check for separate charges for removal, plumbing, backsplash, extra seams, and delivery before comparing totals. Taxes, deposits, and warranty terms should also be clear in the written estimate.
Three kitchen layouts show how the total can differ
| Project example | Stone area | Estimated installed total | Typical scope |
|---|---|---|---|
| Small galley | 25 sq ft | $1,800-$2,800 | Simple runs, one sink cutout |
| Standard kitchen | 35 sq ft | $2,500-$4,500 | Several runs, standard edge, one cutout |
| Kitchen with island | 55 sq ft | $4,000-$6,800 | Island, additional seams, more fabrication |
These examples assume ordinary access and standard installation. A premium slab, extra removal, or upgraded edges can raise the totals; an in-stock slab and uncomplicated layout may keep a project toward the lower end. Use the measured square footage and written scope to make a fair comparison.
How to lower the price without changing the granite
Keep the layout simple, use a standard edge, and avoid unnecessary backsplash or extra cutouts. If the existing cabinets are sound and the old countertop can be removed without special handling, ask whether demolition can be excluded or completed separately. Confirm that lower-cost preparation will not damage cabinets or affect installation quality.
Get at least three itemized estimates based on the same measurements and slab specification. Ask about remnants for a small vanity or a compact counter section, but verify that the color and pattern match the main slab. The biggest controllable savings usually come from limiting fabrication and add-ons, not choosing an unverified lower stone rate.