A used Delta Shopmaster band saw typically costs $50-$150, with an average price near $100 for a working 9-inch benchtop model. Condition, included blades or fence, local availability, and shipping can move the total substantially; new old stock is less common and often priced higher.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used working saw | $50 | $100 | $150 | Common local-sale range |
| Used saw needing repair | $20 | $45 | $75 | Motor or setup issue possible |
| New old stock | $180 | $250 | $350 | Price depends on model and completeness |
| Replacement blade | $10 | $18 | $30 | Blade length and tooth type vary |
What a working 9-inch Shopmaster usually costs
For a functional Delta Shopmaster BS100-style 9-inch saw, a reasonable local purchase price is $75-$125. A clean example with a working motor, intact table, blade guides, and fence may reach $150. A dusty but operational saw with missing accessories is more often $50-$90.
New old stock listings can ask $180-$350, but that does not necessarily reflect a completed sale. These older saws are discontinued, so buyers should compare the asking price with current condition and the cost of obtaining blades or replacement parts. Assumptions: standard 9-inch benchtop model, local pickup, ordinary wear, and no major electrical or mechanical fault. For most buyers, the best price target is about $100 for a complete, tested saw.
How the saw, blade, and pickup shape the quote
A used tool’s price is mostly the saw itself; there is usually no professional installation charge. The table below separates common purchase expenses from optional costs that can raise the out-the-door amount.
| Cost item | Low | Typical | High | What changes it |
|---|---|---|---|---|
| Saw purchase | $50 | $100 | $150 | Condition and included accessories |
| Replacement blade | $10 | $18 | $30 | Length, width, and tooth pattern |
| Pickup or local delivery | $0 | $15 | $50 | Distance and seller arrangements |
| Basic tune-up parts | $5 | $20 | $60 | Guide blocks, tires, or hardware |
| Repair labor | $0 | $60 | $150 | Shop minimum and diagnosis |
A repair shop may charge $60-$125 per hour, often with a minimum diagnostic fee of $40-$80. Since labor can exceed the value of the saw, a buyer should ask for an estimate before authorizing work. Blade replacement is usually inexpensive; motor and electrical repairs are the expenses to investigate first.
Motor condition and 9-inch capacity change value
Model details matter because the Shopmaster name covers more than one tool and configuration. Confirm the model number on the rating plate and verify that the saw’s throat capacity, table, and blade requirements match the listing. A smaller benchtop saw should not be priced like a larger floor model.
Run the motor for several minutes if possible. A steady sound and smooth blade tracking support a price near the typical range; humming, burning odor, excessive vibration, or a blade that wanders justify a discount or a pass. Missing guards, cracked plastic, damaged table tilt hardware, or a bent frame can add repair expense. A questionable motor can turn a $100 purchase into a poor value even when the asking price is low.
Accessories also influence value, but only modestly. A fence, miter gauge, stand, and spare usable blades may justify roughly $10-$30 more than a bare saw, depending on condition. Verify that accessories fit the specific model rather than assuming parts from another Delta bandsaw will work.
Regional listings vary with pickup distance
Prices differ by local supply and the cost of moving a bulky benchtop tool. In many suburban and rural markets, a working saw may list for $50-$110 because sellers favor quick local pickup. In large metro areas with more tool buyers, comparable listings may run 10%-25% higher, particularly for clean, tested machines.
Shipping can erase a bargain. A $75 listing shipped across the country may add $40-$100 or more for packing and transport, while a local pickup may cost nothing beyond fuel. Check whether the seller will demonstrate the saw and include the stand or fence before comparing distant listings. Compare the delivered total, not just the advertised price.
Three realistic purchase totals for common conditions
| Purchase scenario | Saw price | Added expense | Estimated total |
|---|---|---|---|
| Working saw, local pickup | $90 | $0 | $90 |
| Complete saw plus new blade | $110 | $18 blade | $128 |
| Low-priced saw with shop repair | $45 | $90 labor and $20 parts | $155 |
These examples assume no sales tax or long-distance freight. The repair example illustrates why a low initial asking price does not guarantee the lowest final cost. Tested equipment often beats a repair project once parts and labor are included.
When replacing a blade beats paying for repair
A dull or damaged blade is a normal maintenance item, and replacement usually costs $10-$30. The required blade length and width should be checked against the model manual or the existing blade before ordering. Guide blocks, tires, and small hardware may also be economical fixes if available at modest cost.
By contrast, a failed motor, damaged frame, or hard-to-source proprietary part can make repair uneconomic. A shop repair totaling $100 or more may exceed the value of an average used Shopmaster. Ask whether the estimate includes parts, diagnosis, and any minimum labor charge, then compare it with another working used saw. Set a repair ceiling before buying a machine with an unknown fault.
How to lower the Shopmaster purchase price
Ask the seller to demonstrate startup, blade tracking, table tilt, and cutting on scrap; a short test can reveal problems before payment. Missing accessories and a worn blade are reasonable negotiating points, but a motor fault should be treated as a repair risk rather than a guaranteed small discount.
Local pickup, patience, and a clear model-number check can prevent shipping and compatibility costs. Compare at least three nearby listings, and avoid paying a premium for accessories that are incomplete or damaged. If the saw needs a blade, include the replacement in the offer instead of evaluating only the sticker price. A practical target is $75-$125 for a tested, complete 9-inch saw, with repair costs budgeted separately.