A new DeWalt chop saw typically costs about $250-$400 for a 14-inch corded abrasive cut-off saw, with a common purchase price near $300. The final budget depends on the model, blade and stand, plus whether the job needs a concrete-cutting saw, delivery, or replacement parts.
The prices below are typical U.S. retail ranges rather than fixed manufacturer prices; sales, stock and local taxes can change the amount.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| DeWalt 14-inch corded chop saw | $250 | $300 | $400 | Tool only; abrasive metal-cutting type |
| Replacement abrasive blade | $10 | $18 | $30 | Price varies by diameter and pack size |
| Compatible saw stand | $100 | $150 | $220 | May be sold separately |
| Basic tool-and-accessory setup | $275 | $400 | $620 | Saw, one blade, and stand |
| Used 14-inch DeWalt saw | $100 | $200 | $300 | Condition, age and included items matter |
What a 14-inch DeWalt chop saw usually costs
Plan on $250-$400 for a new corded 14-inch DeWalt abrasive chop saw, before tax and optional accessories. The DeWalt D28730 is a common reference point in this category. Retail prices fluctuate, and listings may bundle extra blades or a stand, so buyers should compare the included items rather than judging by the headline price alone.
This range assumes a standard shop or jobsite saw for cutting metal stock with an abrasive wheel. It does not include a work stand, spare blades, an extension cord, delivery or installation. For a typical purchase, $300-$350 is a practical tool-only budget; a complete basic setup often lands around $350-$500.
DeWalt’s 60V cut-off saws are a different product category, intended for cutting materials such as concrete or masonry. They can cost roughly $500-$700 for a bare tool, while a battery-and-charger kit may push the purchase above $700. Buyers searching for a metal chop saw should check the tool’s intended material and blade type before comparing prices.
Assumptions: U.S. retail pricing, standard corded 14-inch metal-cutting model, ordinary availability, and no sales tax.
How the blade, stand, and labor change the quote
The saw itself is usually the largest expense, but blades and stable support can add $25-$220 to a basic purchase. A price comparison should separate the tool from consumables and accessories, particularly when one seller advertises a bundle and another lists the saw alone.
| Cost item | Typical price | What changes the price | Budget note |
|---|---|---|---|
| 14-inch DeWalt saw | $250-$400 per tool | Retailer, availability, package | Check model and included blade |
| Abrasive cutting wheel | $10-$30 per blade | Brand, thickness, quantity | Frequent cutting uses blades faster |
| Metal-cutting blade upgrade | $60-$150 per blade | Tooth design and material rating | Verify compatibility and saw rating |
| Saw stand | $100-$220 per stand | Capacity, rollers, folding design | Useful for long stock and repeated work |
| Setup or repair labor | $75-$125 per hour | Shop rate and work required | Most buyers assemble a portable saw themselves |
A shop or tool-repair provider may charge a diagnostic or minimum service fee of about $50-$100, even when the repair takes less than an hour. For paid work, a rough labor estimate is . A straightforward inspection or adjustment might take 0.5-1.5 hours, while motor or switch repairs can require more time and parts.
Some saws include a basic abrasive wheel, but it may not be the right choice for every metal or cut. Compare the blade’s intended material, maximum speed and arbor size with the saw specifications. A premium blade is not automatically compatible or appropriate.
Which motor, blade, and stock dimensions affect price?
Cutting capacity and the material being cut determine whether a basic abrasive saw is sufficient or a more specialized setup is needed. A standard 14-inch model is intended for common metal stock, but capacity varies by the shape and angle of the workpiece. The saw’s product specifications should be checked for maximum round, square and rectangular cuts.
For occasional cuts in steel tubing, angle iron or rebar, the included abrasive wheel can keep the initial spend lower. Abrasive blades commonly cost $10-$30 each and wear down during use. For repeated production work, a compatible premium metal-cutting blade may cost $60-$150, but buyers should confirm the specific saw allows that blade type; a different blade cannot be assumed safe simply because its diameter fits.
Material size also changes the support needs. Short pieces may sit securely on the saw’s base, while stock longer than about 6-8 feet is easier to control with a stand or roller support. A stand priced around $100-$220 can reduce handling difficulties, but it may not be necessary for occasional short cuts.
Cutting concrete, brick or masonry calls for a different tool and blade arrangement than cutting metal. DeWalt 60V cut-off saw pricing often starts around $500-$700 for the bare tool, and batteries may add several hundred dollars. That higher price reflects a different application, not an upgrade required for ordinary metal chop-saw work.
New, used, and bundled DeWalt saw prices compared
A used saw can save $50-$150 versus a new model, while a bundle is worthwhile only when its accessories are actually needed. Used 14-inch DeWalt chop saws commonly appear around $100-$300, depending on condition, age and included accessories. A missing guard, damaged power cord, rough motor operation or worn clamping mechanism can erase the apparent savings.
| Purchase option | Typical price | What it may include | Check before buying |
|---|---|---|---|
| New tool only | $250-$400 | Saw and sometimes a starter blade | Model, warranty and blade inclusion |
| New bundle | $350-$620 | Saw, blade, stand or accessories | Separate value of each included item |
| Used local purchase | $100-$300 | Tool and variable extras | Guard, clamp, cord, motor and operation |
| Repair of an existing saw | $50-$300 | Diagnosis and common parts | Repair quote versus replacement price |
A bundle priced at $450 can be a reasonable buy if it includes a suitable stand and spare blades that would otherwise cost $100-$200. If it includes accessories that will remain unused, a lower tool-only price is usually better value. Used listings may not include a reliable warranty, and the buyer may have little recourse if a fault appears after purchase.
For a damaged saw, request a repair estimate before replacing it. A minor switch, cord or adjustment issue may cost less than a new tool, but a repair near $200-$300 can be difficult to justify on an older saw without warranty coverage.
What regional retail prices and delivery can add
Local availability, shipping and sales tax can create a noticeable difference even when two stores list the same model. In large metropolitan markets, stocked tool selections and retailer competition can keep prices near the middle of the national range. A practical planning estimate is about $250-$400 for the saw before tax.
In remote or rural areas, limited local stock or shipping can add roughly 5%-15% to the effective price, especially for bulky stands or bundled equipment. Urban listings can also run 5%-10% higher than a national sale price when supply is tight or the retailer charges for delivery. These are budgeting adjustments, not guaranteed regional markups.
Delivery for a saw or stand may range from about $0-$40, depending on retailer, order size and distance. Sales tax is separate and varies by state and locality; a $300 tool purchased where the combined rate is 8% would cost $324 before any delivery charge. Online prices should be compared at checkout, not only on the product page.
Jobsite purchase costs may include a rush or same-day delivery fee of roughly $25-$75, depending on the vendor and location. Picking up the tool locally can avoid that charge, but transportation should keep the saw secure and protect its guard and power cord.
How long setup and repair labor can take
Most buyers can assemble and check a new portable saw in about 30-60 minutes without paying a technician. Stand assembly may add another 30-60 minutes. The exact time depends on the stand design, workspace and whether the instructions require adjustments before use.
For service work, independent repair shops commonly charge around $75-$125 per hour, sometimes with a diagnostic minimum. A basic inspection, cleaning or minor adjustment may take 0.5-1.5 hours; a more involved repair can take 1-3 hours plus parts. Ask whether the diagnostic charge is credited toward the repair and whether the estimate includes replacement parts.
Installation is generally not a separate contractor service for a portable chop saw. A business setting the saw up for production may still pay for a workbench, electrical changes, extraction or safety controls. Those costs are site-specific and should not be confused with the retail price of the tool.
For a new tool, verify the outlet and circuit requirements in the manual and use an extension cord sized for the saw’s power draw and distance. A long or undersized cord can create performance and safety problems; selecting the right cord is more important than buying the cheapest available one.
When a repair, abrasive wheel, or other saw costs less
The lowest-cost option depends on cut frequency and material, not just the purchase price of the saw. For occasional metal cuts, a standard abrasive DeWalt chop saw at $250-$400 is often less expensive upfront than a specialized cutting system. If the current saw only needs a modest repair, a $50-$150 fix may also beat replacement.
Abrasive wheels usually have the lowest initial price, around $10-$30 each, but they wear and produce sparks and cutting debris. A compatible higher-cost blade may be economical for frequent work if it lasts longer or produces the finish needed. The savings depend on actual use, blade life and whether the saw manufacturer approves the blade.
A portable band saw can suit some repeated cuts or material shapes, but it is not a direct one-for-one substitute for a stationary chop saw. Prices vary by model and battery platform; buyers should compare the tool, battery, charger and cutting capacity as a complete system. A battery tool that appears inexpensive as a bare tool may require a substantial additional purchase.
Renting may be cheaper for a single short project if a local tool-rental shop has the right saw. A one-day rental can run roughly $40-$90, with possible deposits, blade charges or damage fees. If repeated use is likely, the rental total can approach the cost of buying a basic saw quickly.
Three realistic DeWalt chop saw budgets
For most first-time buyers, the $350-$500 range covers a saw, a spare blade and useful basic support without paying for a premium setup. The examples below assume ordinary U.S. retail availability and exclude sales tax unless stated.
| Buying scenario | Estimated total | Price detail | Assumptions |
|---|---|---|---|
| Occasional garage cutting | $275-$340 | $250-$300 saw plus $10-$30 blade | Existing bench, no delivery |
| Regular jobsite metal work | $380-$550 | $280-$350 saw, $20-$40 blades, $100-$160 stand | One stand and initial consumables |
| Used saw with service reserve | $160-$400 | $100-$250 used tool plus $60-$150 inspection or repair allowance | Condition varies; no new-tool warranty assumed |
In the occasional-use example, a buyer already owns a stable work surface and needs only one replacement blade. The regular-use budget includes a stand for longer stock and a small supply of consumables. The used scenario has a wider uncertainty range because a low purchase price may be offset by missing parts or repair work.
For a concrete-cutting 60V model, use a separate budget: roughly $500-$700 for the bare tool, with a compatible battery and charger potentially bringing the total above $700. A metal-cutting setup should not be priced from that comparison unless the intended application actually requires a concrete cut-off saw.
Ways to keep the DeWalt chop saw purchase under budget
Control the package scope first: buy only the saw, blade type and support equipment that match the work planned. A buyer making occasional short cuts may not need a stand, premium blade or extra accessory kit. Conversely, frequent cutting of long stock can justify a stand that improves support and handling.
Compare at least three quotes or retailer listings for the same model number. Check whether the price includes a blade, warranty, delivery and return eligibility. A $20 discount may disappear if shipping costs $30, while a bundle can be cheaper if its included stand or blades are useful.
Choose the blade based on the metal, cut quality and frequency of use. Avoid buying a premium blade before confirming compatibility and expected workload. For low-volume work, a standard abrasive wheel may be the more economical starting point; for frequent production, compare cost per usable cut rather than purchase price alone.
Consider a used saw only after testing the clamp, guard, motor start, cord and basic operation. Ask for the model number and inspect for missing hardware. If a repair is needed, compare the full purchase-plus-repair total with a new saw’s price and warranty rather than treating the used listing as the entire cost.
Finally, avoid paying for urgent delivery when scheduling allows local pickup or standard shipping. Buying the saw and needed accessories together may reduce delivery charges, but unnecessary extras increase the total. A clear list of planned materials, cut sizes and frequency makes it easier to choose the least expensive setup that remains suitable.