The Dewalt Dw746 Table Saw Price varies by region, condition, and included accessories. Buyers typically pay a total that reflects motor power, cast iron table quality, fence system, and shipping or tax. This article discusses price ranges, major cost drivers, and practical ways to estimate and manage costs for a new or replacement unit. Cost transparency helps buyers compare options and avoid overpaying.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Product price (new) | $450 | $550 | $700 | Retail or factory-direct listed price |
| Taxes and fees | $0 | $40 | $120 | Depends on state and local surcharges |
| Delivery | $0 | $25 | $80 | Doorstep delivery or curbside |
| Accessories bundle | $0 | $60 | $180 | Dust chute, blade, miter gauge, stand |
| Taxes and duties (out-of-region) | $0 | $0 | $0 | Assumes domestic shipment within the U.S. |
Direct price for the unit and what drives it
Typical total price range for a new DW746 unit is $450-$700, depending on seller, included stand, and current promotions. Most buyers see an average around $550. The per-unit price reflects the 15-amp motor, 10-inch blade capacity, rack-and-pinion fence, and table surface quality. Regional promotions, inventory levels, and bundled stands can push the price toward the higher end or bring it down into the low $500s.
Major cost components in a DW746 quote
Understanding the quote structure helps buyers compare offers. The main cost components are listed below with representative ranges.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Machine price | $450 | $550 | $700 | Base price without stand |
| Stand or cart | $0 | $70 | $180 | Standalone unit vs integrated stand |
| Blade and alignment tools | $20 | $50 | $110 | Quality blade affects cut accuracy |
| Delivery/assembly | $0 | $25 | $90 | Set-up complexity varies by region |
| Tax | $0 | $30 | $120 | State and local rates apply |
| Warranty extension | $0 | $40 | $160 | Optional coverage |
Assumptions: Midwest labor rates, standard blade, normal access, standard packaging.
Which variables most affect DW746 pricing
Two key drivers often swing the final quote. First, region and delivery method can add or subtract hundreds. Second, accessory bundles and stand type drive immediate cost differences. For example, a DW746 with a heavy-duty stand and a carbide blade set tends to be at the high end of the range, while a bare unit or basic stand keeps the price near the lower end. Regional promotions can alter both ends of the spectrum.
Regional price differences you can expect in the U.S.
Prices vary by market density and transport distance. In urban areas with high demand, DW746 bundles tend to price toward the upper quartile, while suburban or rural markets may show modest discounts. Expect a delta of roughly 5% to 15% between markets with similar tax treatment, and up to 20% when including rush delivery or premium stands. Regional timing and supply chain constraints can further shift these figures month-to-month.
Labor and setup as part of the DW746 cost
For most buyers, installation labor is minimal if the unit ships with a stand. If professional assembly is chosen, reasonable estimates are 2-4 hours at $40-$75 per hour, plus any special alignment or calibration work. In this scenario, the labor line item adds about $80-$350 to the total, depending on local rates and access to the workspace.
Accessory choices and upgrade costs
Common upgrades include a standard blade set, zero-clearance insert, dust collection accessories, and higher-grade miter gauges. A bundled kit often brings the unit price up by $60-$180, but it can improve long-term cut quality and cleanup. If a seller includes a stand, the incremental cost for the stand is typically $40-$120 above the bare saw price.
Estimating the total cost of ownership for the DW746
Beyond purchase price, ownership costs include dust collection efficiency, blade replacement frequency, and warranty duration. Over a 5-year period, plan for blade changes every 6–12 months based on usage, with blades costing $20-$60 each. A basic dust collection add-on may add $60-$180 upfront but can reduce cleanup time and improve safety during operation.
Ways to reduce the DW746 price without sacrificing essential function
Smart cost-cutting involves scope control and timing. Consider a bare saw without an included stand if you already own a compatible cart, or buy a used/demo unit with a limited warranty. Coordinate purchases to capture seasonal promotions, compare multiple quotes, and avoid optional upgrades that do not affect core performance. Bundling accessories only when they are actually needed helps prevent unnecessary expense. Focus on necessary components and delivery timing to minimize the overall cost.
Practical quote example snapshot
To illustrate, a typical new DW746 with basic stand and a standard 2-year warranty might appear as follows. The combined total would likely land in the $520-$620 range, before tax, with a per-unit price around $480-$550 for the saw itself and an additional $40-$120 for the stand and basic accessories.
Variant scenarios you may see in quotes
- DW746 with heavy-duty stand, carbide blade, and dust collection kit: $610-$750
- DW746 bare saw only, no stand, minimal accessories: $450-$520
- DW746 with extended warranty and expedited delivery: $700-$780
Note: Prices fluctuate with promotions, location, and seller policies. Always confirm whether delivery, tax, and any required permits are included in the quoted price.