A new Dexter T-600 commercial washer typically costs about $18,000-$30,000 for the machine, with installed project totals often reaching $22,000-$38,000. The final price depends on distributor quotes, control and payment setup, delivery access, plumbing and electrical work, and whether an existing washer must be removed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Dexter T-600 machine | $18,000 | $24,000 | $30,000 | New unit; configuration and dealer pricing vary |
| Delivery and placement | $700 | $1,500 | $3,500 | Distance, lift-gate, and indoor access affect charges |
| Installation and connections | $2,000 | $4,000 | $8,000 | Assumes existing utility service is usable |
| Installed project total | $22,000 | $29,500 | $38,000 | Before major utility upgrades or unusual construction |
Assumptions: U.S. commercial laundry installation, standard new equipment, normal access, and no major structural or utility changes.
What a new Dexter T-600 washer usually costs
The T-600 is a commercial washer-extractor with roughly 60-pound capacity. Budget about $18,000-$30,000 for the washer before freight, installation, tax, or site work. A practical planning figure is around $24,000 for the equipment itself, but published pricing is not consistently available and dealers may quote different configurations.
For a straightforward replacement, a total budget near $25,000-$33,000 is a reasonable starting point. That assumes the laundry already has suitable water, drain, electrical, and mounting provisions. New construction or a difficult retrofit can exceed the high end.
How the equipment, freight, and labor shape the quote
Ask the dealer to separate the washer price from site work. A single bundled quote can hide costly exclusions, particularly electrical changes, rigging, old-machine removal, and payment-system setup.
| Quote component | Typical price | What changes the charge | Pricing basis |
|---|---|---|---|
| Washer equipment | $18,000-$30,000 | Configuration, controls, dealer discounts | Per machine |
| Freight and placement | $700-$3,500 | Distance, stairs, door width, lifting needs | Per delivery |
| Installation labor | $1,500-$5,000 | Connection work and crew hours | $100-$175 per hour per technician |
| Utility or drain work | $500-$5,000 | Capacity, pipe routing, code requirements | Per job |
| Removal and disposal | $300-$1,200 | Machine weight and access | Per unit |
Labor is often a smaller line than equipment, but utility modifications can quickly change the installed total. Confirm whether startup, testing, and haul-away are included.
Which capacity, utility, and access details raise the price
Site conditions can matter as much as the machine’s quoted price. A replacement in an existing 60-pound washer bay may need only reconnection and testing. A new installation may require a larger drain, revised water lines, electrical work, a reinforced floor, or changes to the laundry-room layout.
Confirm the exact model and configuration on the proposal, then have the installer verify the manufacturer’s current utility and mounting requirements. Delivery access also matters: narrow doors, stairs, long carries, or a need for specialized lifting can add hundreds or several thousand dollars.
Get a site inspection before treating an equipment-only quote as a complete project estimate. Local permits or inspections may apply when plumbing or electrical systems are changed; fees depend on the jurisdiction and scope.
How long installation takes and what labor covers
A like-for-like replacement may take about 4-8 labor hours, while a more involved installation can require 1-3 days on site. Crew size, scheduling, and whether the washer can be moved directly into its final position affect the labor charge. Some projects also require separate plumbers, electricians, or riggers.
Installation commonly includes positioning, anchoring where specified, utility connections, and operational testing. It may not include new circuits, drain-line replacement, wall or floor repairs, or extended commissioning. Request a written list of included work and hourly rates for extra work before approving the job.
Three T-600 project examples show the budget spread
| Scenario | Work included | Estimated total |
|---|---|---|
| Existing laundry replacement | $21,000 machine, $900 delivery, 8 labor hours at $125, $500 removal | $23,400 |
| Typical commercial installation | $24,000 machine, $1,500 delivery, 20 labor hours at $140, $1,500 utility work | $29,800 |
| Restricted-access retrofit | $29,000 machine, $3,000 rigging and delivery, 32 labor hours at $160, $5,000 site work | $42,120 |
Examples are planning estimates, not dealer offers. Taxes, permits, payment equipment, and financing charges are excluded.
The same washer can produce a project spread of nearly $19,000 when access and utility work differ. Use the line items to compare bids with matching scope rather than comparing machine prices alone.
Regional freight and labor can shift the installed price
Equipment pricing may be similar across markets, but delivery distance and trade rates vary. As a planning allowance, rural locations far from a distributor may run 5%-15% above a nearby-market estimate for freight and service, while high-cost metro labor can add roughly 10%-25% to installation charges.
These percentages apply to the affected charges, not necessarily the whole project. A distant site with easy access may still cost less than a nearby urban retrofit requiring rigging and utility reconstruction. Compare local, itemized quotes and verify travel, delivery, and minimum service fees.
When repair or a used washer costs less than replacement
A repair may make financial sense when the fault is limited and the machine has a sound frame, drum, and controls. Routine service can cost a few hundred dollars, while major component work may reach $1,000-$5,000 or more depending on parts and labor. A dealer or qualified technician should diagnose the washer before a replacement decision.
Used commercial washers may be listed for substantially less than a new T-600, but price alone does not establish remaining life or condition. Ask about service history, parts availability, testing, and any warranty. Compare the used machine’s delivered and installed cost with the cost of repairing the existing unit.
How to lower the T-600 purchase and installation bill
Keep the scope to a true replacement when the existing utilities and mounting are suitable. Arrange an access check before delivery, clear the route, and confirm who handles disconnecting and hauling away the old washer. These steps can prevent return trips, extra rigging, and hourly overruns.
Request at least three itemized dealer or installer quotes with the same model, freight terms, warranty, startup, and removal requirements. Ask whether payment controls or other accessories are included or priced separately, and avoid paying for upgrades that the laundry’s operating setup does not require.
The most reliable savings usually come from preventing surprise site work, not from choosing a machine based on its lowest advertised price. Confirm taxes, permit responsibility, delivery timing, and exclusions in writing before signing.