A new Dexter T-950 commercial dryer commonly costs about $8,000-$13,000 before installation, while a used unit may run $3,000-$8,000 depending on age and condition. The final price depends on gas or electric configuration, freight, local labor, venting, and whether the site needs utility upgrades.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New T-950 dryer | $8,000 | $10,500 | $13,000 | Equipment only; configuration and dealer pricing vary |
| Used T-950 dryer | $3,000 | $5,500 | $8,000 | Condition, age, and service history affect price |
| Freight and placement | $400 | $900 | $1,800 | Distance, liftgate, and access affect charges |
| Installed new unit | $9,000 | $12,500 | $17,000 | Assumes ordinary connections and no major upgrades |
What a 50-pound Dexter T-950 typically costs
The T-950 is a large-capacity commercial dryer intended for laundromats and other high-volume laundry operations. Buyers should budget roughly $8,000-$13,000 for a new machine, with dealer quotes varying by fuel type, controls, included parts, and order volume. A complete delivered and connected installation often totals $9,000-$17,000.
Used machines can lower the upfront expense, but a low asking price may exclude freight, testing, or repairs. A reasonable used-unit planning range is $3,000-$8,000, before any refurbishment. Assumptions: one 50-pound dryer, standard commercial configuration, typical U.S. dealer pricing, and normal site access. For budgeting, compare installed quotes rather than equipment-only listings.
How equipment, freight, and hookup shape the quote
A dealer or installer quote may separate the machine from delivery and site work. The following ranges are planning estimates, not fixed Dexter list prices; local utility requirements and dealer packages can change them.
| Quote item | Low | Typical | High | What changes it |
|---|---|---|---|---|
| Dryer equipment | $8,000 | $10,500 | $13,000 | Configuration, dealer, order size |
| Freight and placement | $400 | $900 | $1,800 | Route, stairs, dock, rigging |
| Installation labor | $500 | $1,200 | $2,500 | Connections and access |
| Vent, gas, or electrical work | $300 | $1,000 | $3,500 | Run length and required upgrades |
| Removal and disposal | $150 | $450 | $900 | Old unit weight and haul distance |
Installation labor is often estimated from crew time and the contractor’s hourly charge. A straightforward placement and hookup may take several hours, while utility changes or difficult moves can extend the work. Ask whether freight, rigging, startup, and disposal are included or billed separately.
Gas type, vent length, and access can raise installation costs
Fuel and building conditions are major quote variables. A gas model may require an appropriately sized gas connection, shutoff, and code-compliant venting; an electric configuration can require suitable circuit capacity and wiring. The exact requirements depend on the machine specification and local code, so confirm them with the dealer and a qualified installer.
Vent runs longer than about 10-15 feet, multiple elbows, or an undersized existing duct can add labor or material costs. Moving a dryer through a narrow doorway, up stairs, or into a tight laundry room may also require extra handling. Verify the model’s utility specifications before treating an existing connection as reusable.
Regional delivery and labor rates change the installed price
Costs tend to be higher in major coastal metros and remote locations than in areas with nearby commercial laundry dealers and installers. As a planning adjustment, urban markets with high labor rates may land 10%-25% above a middle-of-market installation quote; rural delivery or limited service availability can add roughly 5%-20%. These are broad budgeting differences, not guaranteed regional price schedules.
Freight depends on the shipping origin, delivery access, and whether the carrier can unload at a commercial dock. A site without a dock may need a liftgate or separate rigging, while a remote address can face a mileage charge. Request a delivered-to-site figure for the actual address instead of relying on a catalog price.
Three T-950 purchase scenarios with different totals
| Scenario | Equipment and scope | Estimated total |
|---|---|---|
| Used replacement | $4,500 used unit, $650 freight, $900 hookup and testing | $6,050 |
| New standard install | $10,000 dryer, $750 freight, $1,300 installation | $12,050 |
| New unit with upgrades | $11,500 dryer, $1,200 freight, $2,500 utility and vent work, $600 removal | $15,800 |
These examples assume one dryer and exclude sales tax, financing, and major building construction. The standard-install case assumes usable utilities and ordinary access; the upgraded case reflects additional site work rather than a higher required equipment price. Use the scope details to compare bids on equal terms.
New versus used T-950 pricing and repair exposure
A used T-950 can make sense when its drum, bearings, burner or heating system, controls, and safety devices have been inspected. Ask for the model and serial information, service records, operating test, and a written account of included repairs. A machine sold as-is may need parts or labor that narrow the savings.
For a new unit, confirm warranty coverage, what labor or travel is included, and whether the seller provides startup support. Warranty terms vary by seller and purchase arrangement, so they should be checked in writing rather than assumed from the equipment price. Compare the purchase discount with inspection, repair, and downtime risk.
How to lower a T-950 quote without cutting capacity
Keeping the existing dryer location and compliant utility connections can avoid costly rerouting. Measure doorways and the delivery path before ordering, and provide the installer with clear photos of the gas or electrical connection, vent, and access route. Consolidating delivery with other laundry equipment may also reduce per-unit freight or handling charges.
Get at least two itemized quotes that specify the exact configuration, delivery method, installation scope, disposal, taxes, and warranty. Avoid paying for vent or utility upgrades until an installer confirms they are needed, but do not bypass code requirements. The most reliable savings come from eliminating duplicate charges and unnecessary site work.