A new Dexter T600 commercial washer typically costs about $7,500-$11,500 for the machine, with a complete installed project often reaching $9,000-$16,000. Dexter T600 washer price depends on dealer quote, controls, delivery, utility connections, and whether the site needs electrical or plumbing work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New T600 machine | $7,500 | $9,500 | $11,500 | Equipment only; configuration and dealer pricing vary |
| Installed new washer | $9,000 | $12,500 | $16,000 | Standard delivery and connections; major site work costs extra |
| Used or refurbished unit | $2,500 | $5,000 | $7,500 | Condition, age, controls, and warranty affect price |
| Typical capacity | 20 lb | 20 lb | 20 lb | Confirm exact model and specifications on the quote |
What a 20-pound Dexter T600 usually costs
The T600 is a commercial washer-extractor commonly specified at about 20 pounds of rated capacity. For a new machine, a practical equipment-only budget is $7,500-$11,500; the midpoint is roughly $9,500 before delivery, tax, installation, or building modifications. Prices are usually supplied by commercial laundry distributors rather than standard retail checkout.
A normal replacement with compatible hookups may bring the total to $9,000-$13,000. A first-time installation, difficult access, or upgraded utilities can push the project toward $16,000 or more. Assumptions: U.S. distributor quote, standard T600 configuration, ordinary access, and no major construction. Use the installed total—not the machine-only price—to compare quotes.
How equipment, delivery, and hookup charges add up
Distributor proposals may combine freight, setup, and installation or list them separately. The ranges below are planning estimates for one washer; local labor rates and site conditions change the final quote.
| Quote component | Typical range | What it covers | Pricing basis |
|---|---|---|---|
| T600 washer | $7,500-$11,500 | Machine and standard configuration | $7,500-$11,500 per unit |
| Delivery and placement | $300-$1,000 | Freight, lift-gate service, and moving into position | Distance and access |
| Installation labor | $500-$1,500 | Positioning, leveling, and standard connections | $75-$150 per hour |
| Utility or drain work | $500-$3,000 | Electrical, water, drain, or vent-area adjustments as needed | Scope and existing infrastructure |
| Permits and tax | $100-$1,000 | Local permit fees and applicable sales tax | Jurisdiction and purchase amount |
For example, 6-10 hours of installation labor at $75-$150 per hour works out to about $450-$1,500, excluding separate trades or materials. Ask the dealer to identify freight, hookup work, and tax as separate line items.
Which T600 specifications and site conditions change the quote
Confirm the exact model, control package, payment setup, and electrical requirements before treating two prices as comparable. A coin-operated or payment-integrated configuration may add roughly $500-$2,000, depending on the system and whether payment equipment is included. Special finishes, controls, or compatibility requirements can also alter a dealer’s price.
Site work is often the largest variable after the machine. A replacement with suitable water lines, drain capacity, and electrical service may need only a few hours of labor. Moving the washer more than about 25 feet from existing connections, adding a dedicated circuit, or changing a drain line can add $1,000-$4,000 or more. Have the installer verify utility requirements and access before the order is finalized.
How long T600 replacement labor takes at a laundry
A straightforward swap may take a two-person crew about 3-6 hours, including moving the old washer aside, positioning the T600, leveling it, and making standard connections. A new location or utility changes can extend work to 1-2 days, especially if an electrician or plumber must schedule a separate visit.
Labor commonly falls around $75-$150 per hour per technician, though commercial service minimums may apply. Removal of the old machine may cost $150-$500, and stairs, narrow doorways, or a required lift can add $200-$1,000. Confirm whether removal and disposal are included in the installation fee.
New, refurbished, and used T600 prices compared
A used T600 may be listed at about $2,500-$5,000, while a refurbished unit with testing or a limited warranty may run $4,000-$7,500. These prices often exclude freight, installation, and any repairs needed after delivery. A low asking price may not include payment hardware, hoses, or a service guarantee.
A new unit costs more upfront but typically offers a clearer warranty path and known condition. Compare serial number, age, service records, included parts, and warranty coverage. If a used washer needs a $1,500 repair and $1,000 freight and setup, its apparent savings narrow quickly. Compare the total ready-to-operate cost, not just the seller’s price.
How regional labor and freight shift the installed price
Freight distance and local commercial trades affect installed pricing. In dense metropolitan markets or high-wage regions, installation labor may run 10%-25% above a national planning estimate; rural locations can face longer travel charges or limited technician availability. A nearby distributor may reduce freight, while remote delivery or difficult unloading can add several hundred dollars.
For a standard replacement, a buyer might budget $9,000-$13,000 in a lower-cost market and $11,000-$16,000 in a high-cost metro or a site needing more work. These are planning bands, not guaranteed regional prices. Request quotes from dealers that serve the installation address and specify delivery conditions.
Which optional charges belong in a T600 quote
Payment systems, extended service coverage, and old-equipment handling can change the project total. Payment hardware or configuration may add $500-$2,000; an extended warranty or service agreement may cost about $300-$1,000, depending on term and coverage. Ask whether the warranty covers parts, labor, and travel, since exclusions can make plans difficult to compare.
Permit fees vary by city and project scope, and sales tax depends on local rules. A straightforward replacement may need little additional permitting, while altered electrical or plumbing systems can trigger inspections. Include every required fee and accessory in the written installed quote.
Ways to lower the installed Dexter T600 price
Replacing a failed washer in the same location can avoid costly rerouting of drains, water lines, and power. Measure doorways and the equipment path before delivery, clear the area, and confirm that the existing connections meet the installer’s specifications. These steps can reduce extra crew time, redelivery charges, or access equipment fees.
Get at least three written bids with the same model, configuration, freight, removal, installation, and warranty scope. Compare a new unit with a refurbished option only after adding repair risk and transport. Skip payment features or extended coverage that the business does not need, but do not omit required safety or code work. Keeping the location and quote scope consistent makes price differences easier to judge.