A digital door lock typically costs $50-$300 for the lock alone and $150-$500 installed for a standard residential door. Higher prices usually reflect a Wi-Fi or biometric model, door modifications, smart-home integration, or commercial-grade hardware.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Lock hardware | $50 | $160 | $500 | Keypad, app-connected, or biometric models |
| Professional installation | $75 | $150 | $350 | Standard replacement through complex retrofit |
| Typical installed total | $125 | $310 | $850 | Residential lock, labor, and possible adjustments |
| Commercial access-control lock | $250 | $700 | $2,000+ | May require wiring, programming, or multiple doors |
Assumptions: U.S. residential pricing, one exterior door, standard materials, and normal access. High-end totals can exceed the table when wiring or door replacement is needed.
What a digital door lock costs on a standard entry door
Most homeowners spend about $200-$400 for a basic keypad or app-enabled lock installed on an existing, compatible deadbolt opening. A basic keypad deadbolt commonly costs $50-$130, while a Bluetooth or Wi-Fi model often costs $120-$300. Professional labor is usually $75-$200 for a straightforward swap.
A lower-cost project generally reuses the existing deadbolt bore and strike plate, requires no wiring, and uses a lock with a conventional key backup. At the upper end, a lock may include fingerprint access, a built-in Wi-Fi connection, an electronic lever set, or a more involved fit adjustment. A new door or extensive carpentry is priced separately.
For a typical single-family home, a $250-$450 quote is plausible when it includes a reputable smart deadbolt, installation, setup, and minor alignment work. A quote above $500 is not automatically excessive, but it should identify the hardware model and explain any additional labor, wiring, or door repair.
Which hardware and labor charges appear in a lock quote
Quotes can differ because one installer prices only the lock swap while another includes setup, removal, and hardware adjustments. The table shows common residential line items; not every job needs every charge.
| Quote item | Typical price | Pricing basis | What it covers |
|---|---|---|---|
| Digital deadbolt | $50-$300 | Per lock | Keypad, app, or connected hardware |
| Labor | $75-$200 | Per door | Removal, fitting, mounting, and basic test |
| Door or strike adjustment | $25-$125 | Per adjustment | Minor drilling, filing, or latch alignment |
| Wi-Fi bridge or hub | $40-$120 | Per device | Remote access for models without built-in Wi-Fi |
| Removal and disposal | $0-$40 | Per lock | Old hardware handling; often included |
| Keying or extra key service | $10-$50 | Per lock | Key compatibility or additional physical keys |
Ask whether the quoted total includes the lock, tax, setup, and door adjustments, rather than comparing labor-only prices with full-service estimates. Sales tax varies by state and locality. A contractor may also charge a minimum service-call fee of $50-$125 if the lock installation is part of a small standalone visit.
Some connected locks need a separate hub or bridge to provide remote control away from home. Others connect directly to a home Wi-Fi network, but can use more battery power. Check whether the price includes the required connection device; a low hardware price may not represent a complete working setup.
How lock type, door thickness, and bore size change the price
Hardware compatibility and access features are the biggest product-price variables. A keypad-only deadbolt is generally less expensive than a lock with a fingerprint reader, built-in Wi-Fi, or multiple user-management features. For example, a keypad model may cost $50-$130, compared with roughly $150-$350 for many biometric or feature-rich smart locks.
Most residential deadbolts fit doors around 1-3/8 to 1-3/4 inches thick and standard bore openings near 2-1/8 inches. A nonstandard door thickness, narrow stile, unusual backset, or multipoint lock can require special hardware or extra fitting. Allow $30-$150 for common modifications; specialty hardware can add $100-$400 or more.
Door condition matters as much as lock choice. A sagging door, loose hinges, or a misaligned strike can make a new electronic deadbolt bind. Minor alignment work may add $25-$125, while repairing a damaged door edge or replacing a frame can raise the job by several hundred dollars. Ask the installer to separate door repair from lock installation.
Power and connectivity also affect the price. Battery-operated locks avoid electrical work, while wired access-control hardware may require low-voltage cable, a power supply, and controller setup. Wiring for one door can add $150-$600 depending on distance, wall access, and finish repair; a commercial access system may cost substantially more.
How long a one-door installation takes and what labor includes
A compatible deadbolt replacement often takes 30-60 minutes. A new bore, strike adjustment, or electronic setup can extend the visit to 1-2 hours. Installers commonly charge $75-$125 per hour, but many quote a fixed $100-$250 labor amount for a standard residential door.
Labor rises when the door needs drilling, wiring, frame repair, or programming beyond basic user setup. A lock replacement with an existing standard opening may require one technician. A wired commercial system can need an electrician or access-control specialist, adding a second trade and potentially $300-$1,000 in labor for a single complicated door.
Setup should include testing the keypad or app, checking the mechanical key, confirming that the bolt extends smoothly, and explaining how to add or delete user codes. Confirm whether the installer will connect the lock to the home network or smart-home platform. Some services include basic setup; others bill additional time at the stated hourly rate.
For a same-day appointment, after-hours call, or urgent lockout, a service premium of $50-$200 may apply. Scheduling a routine installation and having the correct model on site can reduce the chance of a second trip, which may trigger another minimum charge.
What extra charges can turn a simple lock swap into a larger job
Door preparation is a frequent source of unexpected expense. If the new lock uses the same standard bore and backset, the old hardware can often be removed without major work. A new bore or enlarged opening may cost $50-$150; repairing a split door edge or damaged jamb can cost $100-$500, depending on the finish and extent of damage.
Get separate prices for lock hardware, door repair, wiring, and connected-device setup before authorizing extras. A quote that bundles these tasks into one total can be convenient, but itemized charges make it easier to compare bids and decide which work is necessary.
Other possible add-ons include a Wi-Fi bridge at $40-$120, a reinforced strike plate at $15-$60, or a higher-security strike and long screws at $20-$80 installed. A smart-home hub may cost $50-$250 if the home does not already have compatible equipment. These additions are optional unless the selected lock requires them for the functions the buyer expects.
Commercial buildings may need fire-code-compliant hardware, egress-compatible handles, credential management, or integration with an existing access-control panel. That scope can shift the project from a consumer lock replacement to a system installation. Before ordering, verify that the hardware is appropriate for the door’s use and applicable local requirements.
How digital lock prices differ across U.S. markets
Labor rates and travel distances create regional variation even when the same lock model is used. A standard residential installation may run 10%-20% below the national midpoint in lower-cost rural markets, while dense coastal cities can be 15%-35% above it. These are broad comparisons; local service minimums and availability can matter more than the state average.
Compare the installed total for the same hardware model, not a regional labor estimate by itself. A $100 labor quote in a low-cost area may be reasonable, while a city quote of $180 can reflect higher wages, parking, insurance, or travel time. Rural providers may charge $25-$100 for a long-distance service call, offsetting lower hourly rates.
For planning, a standard keypad lock installed in a lower-cost market might total $150-$300. In a typical suburban market, expect roughly $200-$400. In a high-cost metro area, the same basic scope may reach $275-$500. Smart features and door modifications increase each range, so these figures are not substitutes for a model-specific quote.
Weather and seasonal demand can have a smaller effect than urgency. Severe weather, holiday lockouts, and peak moving periods may limit appointment availability and raise emergency fees. Routine upgrades generally have more flexible scheduling and avoid rush charges.
Keypad, fingerprint, and wired access systems compared
A keypad deadbolt is usually the least expensive digital option, with hardware around $50-$150 and a typical installed total of $150-$350. It suits code-based entry without app control. A Bluetooth or Wi-Fi smart deadbolt often costs $120-$350 for hardware and $225-$500 installed, depending on connectivity, setup, and whether a bridge is needed.
Choose the access method that matches the actual use, because advanced features can add $100-$500 without reducing installation labor. Fingerprint models commonly cost $150-$350 for the lock, with installed totals around $250-$550. They can be useful where users need quick access without carrying keys, but sensor quality, enrollment limits, and weather exposure vary by model.
Wired commercial access-control locks commonly start around $250 for hardware and may reach $1,000 or more per opening before labor. A complete installed door can range from $600-$2,000+, especially when cable, controller, credential software, and integration are included. This is a different scope from replacing a household deadbolt and should be quoted by a qualified access-control contractor.
Repairing a functioning conventional deadbolt is rarely a direct substitute for adding keyless access, but replacing worn mechanical hardware may cost $50-$200 installed. If the digital lock is being considered because the door sticks, fixing hinges or alignment first can prevent repeated battery drain and bolt failures.
Three example quotes for different digital lock installations
A straightforward keypad replacement might include a $90 lock, 45 minutes of labor at $100 per hour, and $20 in minor materials. The estimated total is about $185 before tax. This assumes the existing door opening fits and the installer does not need to repair the frame.
The project scope explains why realistic installed totals range from under $200 to well above $1,000. A connected deadbolt job could include a $220 lock, a $70 Wi-Fi bridge, 1.5 hours of labor at $110 per hour, and $40 for strike adjustment. That estimate totals about $495 before tax, with app setup included.
A wired commercial opening might include a $650 access-control lock, $180 in power and cabling materials, four hours of specialist labor at $125 per hour, and $100 for programming. The estimated total is $1,430 before tax or repairs. A second door, controller replacement, or difficult cable route would raise the amount.
Use these examples as quote checks rather than fixed market prices. Ask each provider to state the lock model, labor time or flat fee, included adjustments, setup responsibilities, and any trip charge. If one bid is much lower, confirm that it includes the same hardware and functionality.
How to lower the digital lock price without losing needed features
Choose a lock that fits the existing deadbolt opening and door thickness. Reusing the bore, backset, and strike position can avoid drilling and finish repair. Before ordering, measure the door and check the manufacturer’s fit requirements; a low-priced model that does not fit can create return costs and a second labor visit.
The most reliable savings come from limiting the scope to features and repairs the door actually needs. If a keypad is sufficient, compare it with app-connected and biometric models before paying for features that will go unused. Also verify whether Wi-Fi is built in or requires a separate bridge, and include that device when comparing hardware prices.
Request two or three itemized quotes using the same model and installation scope. Compare labor, service-call minimums, door adjustments, disposal, setup, and taxes. A quote with a higher labor charge may be the better value if it includes alignment and user-code setup that another contractor bills separately.
Prepare the entry area by clearing furniture and confirming that the door closes and latches before the appointment. Share photos of the lock, door edge, and strike plate when requesting estimates. Avoid authorizing frame replacement or rewiring unless the installer explains the problem and provides a separate price; minor alignment or a battery-operated model may address the issue at lower cost.