A double bed cot, usually called a full-size bed frame in the United States, costs about $100-$1,800 before the mattress, with an average price near $450. Frame material, storage features, delivery distance, assembly, and whether the price includes a mattress are the biggest factors in the final bill.
The estimates below cover a standard 54-by-75-inch full bed frame. Prices are typical retail and installation ranges; custom furniture and high-end brands can exceed them.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Basic metal frame | $100 | $225 | $450 | Frame only; simple assembly |
| Wood or upholstered frame | $250 | $650 | $1,800 | Price depends on finish and construction |
| Storage or platform frame | $300 | $850 | $2,200 | Drawers or lift-up storage increase price |
| Delivery and assembly | $50 | $140 | $350 | May be included in retailer promotions |
| Mattress, if purchased | $250 | $700 | $2,000 | Separate from the frame estimate |
Double Bed Cot Prices for Full-Size Frames
A basic double bed cot frame costs roughly $100-$450, while a midrange frame commonly falls between $350 and $900. Solid hardwood, designer upholstery, built-in drawers, or a lift-up base can bring the frame price to $1,000-$2,200 or more. The average buyer spending on a durable, ordinary frame should budget about $450-$650 before delivery and tax.
These figures assume a full-size frame for a standard mattress, with ordinary access and no custom dimensions. A foundation or slats may be included, but a mattress, bedding, headboard, and local sales tax are not necessarily part of the listed price. Twin-size frames are often cheaper; queen frames usually cost somewhat more because they use more material.
For a standard full bed, a practical frame-only budget is $250-$900. Compare what is included rather than judging the price by the frame label alone: one listing may include a headboard and slats, while another charges separately for both.
Assumptions: standard 54-by-75-inch full frame, U.S. retail pricing, standard materials, and no unusual delivery access.
What Is Included in a Double Bed Cot Quote
Retail quotes and local furniture invoices can combine the frame, delivery, assembly, and removal in different ways. The table separates typical charges so a buyer can compare an advertised price with the actual amount due. Assembly is commonly a flat charge, but some independent installers bill by the hour.
| Quote component | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Frame and slats | $100-$250 | $350-$650 | $1,000-$2,200 | Metal, wood, upholstered, or storage frame |
| Headboard or foundation | $40-$120 | $150-$350 | $500-$900 | May be bundled or sold separately |
| Delivery | $0-$50 | $60-$120 | $150-$250 | Distance, stairs, and room placement affect fees |
| Assembly labor | $50-$90 | $100-$180 | $250-$350 | Frame setup and hardware fastening |
| Old bed disposal | $25-$60 | $70-$120 | $150-$250 | Pickup or haul-away, if offered |
Sales tax varies by state and locality, so a $600 frame may cost more at checkout. Delivery can be free for a qualifying purchase, but “free” service may mean curbside drop-off rather than carrying the cartons into a bedroom. Confirm whether the quote includes stairs, packaging removal, and assembly before scheduling.
Request an itemized total that separates the frame, delivery, assembly, and haul-away. This makes it easier to spot a low advertised price that relies on paid add-ons.
How Wood, Metal, and Upholstery Change the Price
Material and construction explain much of the difference between a $150 frame and a $1,500 one. Lightweight steel frames are generally the least expensive. Solid wood costs more than basic metal or engineered wood, while padded frames add fabric, foam, and upholstery labor. Storage mechanisms and extra hardware add further expense.
| Frame type | Typical frame price | What changes the quote |
|---|---|---|
| Basic metal | $100-$450 | Steel thickness, center support, finish |
| Engineered wood | $200-$700 | Panel thickness, veneer, drawer quality |
| Solid wood | $450-$1,500 | Wood species, joinery, finish, origin |
| Upholstered | $350-$1,400 | Fabric grade, padding, headboard size |
| Storage platform | $450-$2,200 | Drawer count, lift hardware, construction |
For a frame supporting a full mattress, check the stated weight capacity and whether a center rail or extra legs are supplied. A platform with slats spaced more than about 3 inches apart may not meet some mattress manufacturers’ support requirements. If a separate box spring is required, add approximately $100-$350 for a basic full-size foundation, depending on type and quality.
Solid wood and built-in storage can add several hundred dollars over a simple steel frame. A higher price is most defensible when it buys a useful feature, stronger construction, or a finish that suits the room—not just a larger headboard.
How Long Assembly Takes and What Labor Costs
A straightforward metal frame may take one person 30-60 minutes to assemble. A wooden or upholstered frame often takes 1-3 hours, and a storage bed with drawers or lift hardware may require 2-5 hours. Two people may be needed for bulky headboards or heavy components, even when the billed time is short.
Independent furniture assembly rates commonly run $50-$100 per hour, with some providers setting a $75-$150 minimum visit charge. A fixed-price assembly service for a standard bed is often $75-$200; complicated storage frames can reach $250-$350. Retailer assembly prices vary by market and may be bundled with delivery.
For example, 2 hours of work at $75-$100 per hour implies $150-$200 before any minimum fee or travel charge. Confirm whether the installer will tighten all fasteners, attach the headboard, and place the frame where it will be used. Moving an existing bed or carrying parts through narrow stairs may be billed separately.
Assembly is a modest part of the bill for a simple frame but can become material for a storage bed. Keep hardware and instructions accessible, clear the room, and check that the frame is complete before the installer arrives.
Regional Prices for Double Bed Cots Across the U.S.
Retail frame prices vary less by region than delivery and labor charges. Large metro areas often have more retailers and competing delivery services, but higher labor rates. Rural and remote locations may face longer delivery routes or fewer assembly providers. Relative to typical national pricing, delivery and installation can run around 10%-25% higher in high-cost coastal metros and 5%-20% higher in remote areas.
In lower-cost markets across parts of the Midwest and South, basic assembly may be available near $50-$80 per hour. In expensive urban markets, rates of $80-$125 per hour are plausible, and parking, elevator reservations, or building access rules can add charges. These are broad comparisons, not guaranteed local prices; retailer promotions can outweigh regional differences on the frame itself.
Ask for the delivered price to the actual address. A quote for a frame delivered to a ground-floor entrance may not cover room-of-choice service, stairs, or a long carry from the truck. Apartment buildings may require a scheduled delivery window or proof of insurance from the delivery crew.
Compare final delivered totals, not regional shelf prices. A modestly higher frame price can still be cheaper overall if the retailer includes room placement and assembly.
Three Full-Size Bed Cot Quotes Compared
These examples show how scope changes the total for a double bed cot. They exclude mattress and sales tax so the frame and service costs remain comparable. Actual quotes depend on local availability, brand, and delivery conditions.
| Purchase scenario | Frame detail | Labor and service | Estimated total |
|---|---|---|---|
| Basic bedroom setup | Metal frame at $180 | $65 delivery, $90 assembly | $335 |
| Midrange wood frame | Engineered wood platform at $520 | $90 delivery, 2 hours at $80, or $160 | $770 |
| Storage upgrade | Upholstered lift-up frame at $1,250 | $150 delivery, $240 assembly, $90 haul-away | $1,730 |
In the first example, the frame is inexpensive but delivery and labor nearly double its price. The middle example represents a common purchase with a finished platform and paid installation. In the third, storage hardware, upholstery, and removal of the old bed produce a substantially higher invoice.
A mattress can add another $250-$2,000, and bedding can add $50-$300. Those purchases should be shown separately in a quote because mattress quality and comfort preferences vary widely. A bundle may reduce the combined price, but the frame and mattress should still be compared with their standalone prices.
The most useful comparison is the complete, equivalent setup at the same size. Verify frame dimensions, support components, delivery terms, and the number of included assembly hours.
Where Buyers Can Trim the Double Bed Cot Budget
Choose the frame size and features before shopping. If a standard platform and headboard meet the need, avoid paying for drawers, powered lift mechanisms, or decorative upholstery that will not be used. A plain metal frame can save several hundred dollars, while an engineered-wood frame may provide a finished appearance at a lower price than solid hardwood.
Check whether the existing foundation can be reused. Some mattresses require a specific support type, so the manufacturer’s requirements should be checked before removing a box spring or choosing widely spaced slats. Reusing a compatible foundation avoids an extra $100-$350 purchase; keeping an unsuitable one can risk poor support or warranty problems.
Compare at least three quotes with the same full-size specification and service scope. Ask each seller to price delivery, in-room placement, assembly, packaging removal, and old-frame disposal separately. A discount on the frame may not be worthwhile if service fees are much higher. Requesting quotes during a retailer’s standard delivery schedule can also avoid rush or special-trip charges.
Assembly can be a do-it-yourself saving on a basic frame if the instructions are clear and the buyer has the required tools. Allow enough space to assemble the pieces safely, and avoid forcing misaligned hardware. Heavy upholstered or lift-up frames are less suitable for rushed solo assembly because they can be difficult to position and may require two people.
The most dependable savings come from reducing unnecessary features and comparing fully itemized quotes. Keep the required mattress support and safety features intact; cutting those can cost more later than choosing a simpler frame.
Budget check: frame $250-$900, delivery and assembly $100-$300, plus tax; add a separate mattress allowance if needed.