Double door installation cost varies widely by door type, opening size, materials, and labor. This guide presents practical pricing ranges in USD, with per-unit and total estimates to help buyers budget accurately. The keyword cost and price factors are discussed in clear, concrete terms for quick planning.
Assumptions: Midwest labor rates, standard prefabricated frames, normal access, and typical 80-inch tall doors.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Complete double door install (exterior, prehung, including frame) | $1,200 | $2,000 | $4,000 | Includes hinges, hardware, and basic sealing |
| Per door unit (two doors as one setup) | $600 | $1,000 | $2,000 | Baseline for standard materials |
| Labor (installation) | $600 | $1,200 | $2,500 | 2-8 hours depending on opening complexity |
| Door material costs (steel, fiberglass, wood) | $900 | $2,250 | $6,000 | Material choice drives price |
| Frame and hardware upgrades | $150 | $500 | $1,200 | Jamb reinforcement, custom hinges, locks |
Average Price for Double Exterior Doors Including Frame and Labor
Typical total installation price for a standard exterior double door ranges from $1,500 to $3,000, with many projects landing around $2,200. Costs rise when the opening requires structural work, custom framing, or higher-end materials. For a pair of prehung fiberglass doors with durable hardware, expect $1,800–$3,000 overall depending on region.
Assumptions: standard 80-inch tall doors, existing rough opening, no major structural reinforcement needed.
Key Cost Components in a Double Door Installation
Major cost components split the total into tangible parts you can compare. A typical breakdown helps buyers spot savings opportunities and understand where price levers sit.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $900 | $2,000 | $5,000 | Door type and finish vary widely |
| Labor | $600 | $1,200 | $2,500 | Includes removal of old doors |
| Frame and Hardware | $150 | $500 | $1,200 | Reinforcement, weatherstripping |
| Permits/Inspections | $0 | $100 | $300 | Depends on locality and scope |
| Delivery/Removal | $0 | $150 | $350 | Delivery to site; haul-away charges vary |
| Warranty/Refits | $0 | $100 | $350 | Limited vs full coverage |
Impact of Door Material on Price
Material choice is the strongest price driver in double door installations. Steel doors are typically the least expensive option for bulk exterior use but may require more framing work. Fiberglass doors balance price and maintenance, often in the $1,200–$3,000 range for the full setup. Solid wood doors can push total costs well above $3,000, depending on species, finish, and custom milling.
Assumptions: standard size openings, typical finishes, no exotic hardware.
Size and Opening Requirements How 72×80 Opening Affects Costs
Opening size and complexity directly affect labor time and materials. A standard 72×80 rough opening with a symmetrical pair is usually on the lower end, around $1,500–$2,500. If the opening is oversized (e.g., 80×96) or requires structural framing, expect $2,400–$4,000. Custom transoms or sidelights add further costs.
Assumptions: single-story home, exterior installation, typical flashing and sealant.
Regional Price Variations Across the U.S.
Prices vary by region due to labor markets and material supply. In the Northeast and West Coast, total installs commonly trend toward the higher end (roughly $2,400–$4,000) while the Midwest and South often see $1,600–$3,000. Urban markets typically add 10–20% to standard prices due to higher labor and permitting fees.
Assumptions: mixed urban/rural mix; typical permit requirements vary by locality.
Permits and Disposal Fees in Double Door Installations
Permitting can add cost and time to a project. Some jurisdictions require permits for exterior door replacements, with fees ranging from $50 to $300 plus possible inspection charges. Disposal fees for old doors and frames usually add $50–$150 per unit. If a structural engineer review is needed, costs can rise further to $500–$1,000.
Assumptions: no structural retrofit unless specified; standard disposal handled by installer.
Ways to Reduce Costs Without Sacrificing Quality
Cost-conscious choices can trim the price without lowering performance. Opt for standard sizes and finishes, reuse existing framing where feasible, and choose mid-range materials like fiberglass instead of premium wood or steel. Scheduling work during off-peak times or bundling with other exterior upgrades can secure better labor rates. Request itemized quotes to compare material upgrades versus labor savings.
Assumptions: project scope allows non-urgent scheduling; no emergency replacements.