A new double garage door typically costs $1,200-$4,500 installed, with a national midrange near $2,500 for a standard 16-by-7-foot door. The new double garage door cost depends most on material, insulation, opener choice, removal of the old door, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door and installation | $1,200 | $2,500 | $4,500 | Standard 16-by-7-foot opening |
| Door only | $700 | $1,600 | $3,200 | Material and insulation change price |
| Installation labor | $300 | $600 | $1,000 | Existing framing in usable condition |
| Opener, if added | $250 | $500 | $900 | Unit and installation |
What a 16-by-7-foot double door usually costs
For a basic, non-insulated steel door with standard tracks and professional installation, expect about $1,200-$2,000. A midgrade insulated steel door with an opener commonly totals $2,000-$3,500. Custom wood, high-end composite, glass-panel designs, or unusual openings can bring the full project to $4,500-$8,000 or more.
These estimates assume one standard double-wide opening, accessible work area, and no major framing repairs. A 16-by-7-foot door has 112 square feet of door area; installed pricing often works out to roughly $11-$40 per sq ft, depending on product and project scope. Assumptions: U.S. midrange labor, standard opening, ordinary access, and no structural repairs. Most standard replacement projects land between $2,000 and $3,500 when insulation and an opener are included.
How steel panels, labor, and disposal shape the quote
Contractors may quote a combined installed price or itemize the work. The table gives typical ranges for a standard 16-by-7-foot replacement; premium finishes and regional labor can exceed them.
| Quote component | Low | Average | High | Typical basis |
|---|---|---|---|---|
| Door and tracks | $700 | $1,600 | $3,200 | Per double door |
| Installation labor | $300 | $600 | $1,000 | About 3-6 hours |
| Opener and setup | $250 | $500 | $900 | Per opener |
| Old door removal | $75 | $150 | $300 | Removal and haul-away |
| Weather seals and hardware | $50 | $125 | $250 | Per opening |
Some bids include tracks, springs, seals, and disposal in the base price; others list them separately. Ask whether tax, new rollers, lock hardware, and balancing the spring system are included. A low door-only price is not comparable with an installed quote unless the included work is spelled out.
Which size, insulation, and wind rating raise the price
Door size affects both the panel price and the weight-bearing hardware. A 16-by-7-foot opening is common, while 18-by-7-foot doors and openings taller than 7 feet generally cost more; custom sizing can add $300-$1,000 or more. Insulated doors often add $200-$800 compared with basic uninsulated steel, depending on construction and insulation value.
In colder climates, a door with an R-value around 12-18 may cost more but can reduce heat transfer through an attached garage. Wind-rated doors can add roughly $200-$700, and may be required by local code in high-wind areas. Wood or composite finishes can add $1,000-$3,000 over basic steel. Confirm the opening dimensions and local wind-load requirements before comparing product prices.
Where U.S. labor rates shift installed prices
Labor and delivery commonly make metropolitan projects 10%-25% more expensive than similar work in lower-cost rural markets. In high-cost coastal cities, total quotes may run 20%-35% above a national midrange; remote locations can also cost more when delivery or contractor travel is billed separately. Regional differences are especially noticeable for custom doors and work requiring code-specific reinforcement.
Request at least two written quotes based on the same opening size, material, insulation, opener, and haul-away scope. Compare the final installed total rather than the advertised door price, which may exclude labor and delivery.
How many hours installation takes and what labor covers
A straightforward replacement usually takes a two-person crew about 3-6 hours. Installers remove the old door, set tracks, hang sections, fit springs and cables, and test balance and safety features. Labor rates commonly work out to about $75-$150 per crew-hour, though many companies price the complete installation rather than billing by the hour.
Framing repairs, electrical work for a new opener, or an out-of-square opening can extend the visit or require another trade. Ask whether the estimate includes a safety inspection and adjustment after installation. Unexpected repairs are a common reason a simple replacement quote increases on installation day.
Steel, wood, and composite doors compared by price
Basic steel is usually the least expensive and needs relatively little upkeep. Insulated steel costs more but can improve comfort when the garage shares a wall with living space. Wood doors offer a natural appearance and often require periodic refinishing; installed prices may reach $3,500-$8,000. Composite doors can resemble wood with less routine maintenance and commonly cost $2,500-$5,500 installed.
Repair may be cheaper if only a single damaged panel, spring, or opener needs attention. Replacing a panel often costs $250-$800, while a spring repair may run $150-$350; matching an older finish or discontinued panel can be difficult. Choose replacement when damage affects multiple sections or the door system is near the end of its service life.
Removal, framing repairs, and opener add-ons to budget for
Old-door removal and disposal commonly add $75-$300 if not included. Minor frame or trim repairs may add $100-$500; rot or substantial structural work can exceed $1,000. A new opener typically adds $250-$900 installed, while keypad entry, battery backup, or upgraded controls may add about $50-$300 each.
Permit fees vary by city and scope, often around $50-$250 for replacement work when a permit is required. Electrical changes or structural modifications may trigger extra inspections. Get written approval before work begins if the quote allows additional charges for hidden damage.
Which choices reduce the double-door replacement bill
Keep the opening and track layout unchanged when the existing frame is sound, and choose a standard-size steel door instead of custom materials or decorative glazing. Retain a working opener if it is compatible with the new door and meets current safety requirements. Compare quotes with the same insulation level, warranty, removal, and hardware.
Clear stored items away from the work area before the crew arrives, and schedule non-urgent work during periods when local contractors have more availability. Avoid paying for insulation upgrades that do not fit the garage’s use or climate, but do not skip required wind reinforcement. Controlling customization and confirming the complete scope are the most reliable ways to keep the installed price predictable.