Dovre stoves typically cost about $2,000-$5,500 for the appliance alone in the U.S.; larger or specialty models may exceed that range, particularly when imported. The installed price often reaches $3,500-$9,000, depending on model availability, freight, chimney work, local labor, and required permits.
Dovre model pricing is not always published through U.S. dealers, so the figures below are planning estimates rather than fixed manufacturer prices. A written quote should identify the exact model, shipping, installation scope, and any code-related work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stove appliance | $2,000 | $3,500 | $5,500+ | Model, finish, and U.S. availability affect price |
| Delivery and handling | $150 | $350 | $800 | May be higher for special-order imports |
| Standard installation | $1,000 | $2,000 | $3,500 | Assumes a suitable chimney or liner route |
| Typical installed project | $3,500 | $5,800 | $9,000+ | Excludes major masonry or chimney reconstruction |
Assumptions: U.S. retail estimates, standard black finish, normal access, and no major structural or chimney repairs.
What Dovre stoves cost by model size
For budgeting, a compact Dovre wood stove is generally estimated at $2,000-$3,000 before installation. Mid-size freestanding units commonly fall around $3,000-$4,500, while larger, ornate, or harder-to-source models may reach $4,500-$5,500 or more. These brackets reflect typical imported-stove retail pricing, not a guaranteed price for a particular model.
Output capacity, firebox size, door design, finish, and whether the model is stocked domestically all affect the quote. Some U.S. buyers may find limited dealer inventory, which can make freight and lead time more important than the listed base price. Confirm the exact model number and current U.S. stock before comparing prices.
Which parts make up a Dovre dealer quote
A stove quote can combine the appliance, delivery, installation labor, chimney components, and local fees. Installation costs depend on whether an existing compliant chimney can be reused. A new insulated liner, hearth work, or a new vent route can materially change the total.
| Quote component | Typical price | What changes the charge |
|---|---|---|
| Stove and standard accessories | $2,000-$5,500+ | Model, finish, legs or pedestal, and availability |
| Delivery and placement | $150-$800 | Distance, stairs, and special handling |
| Installer labor | $600-$1,800 | Crew size, access, and vent complexity |
| Chimney liner and vent parts | $700-$2,200 | Chimney height, diameter, and liner condition |
| Hearth, permit, and inspection | $100-$1,000 | Local rules and existing floor protection |
Installers may charge about $75-$125 per hour for additional work, although many quote a fixed project rate. Ask whether the quote includes delivery, liner parts, hearth protection, permit fees, and haul-away.
How firebox size and chimney condition change the price
A stove sized for a modest living area may cost less than a high-output unit, but capacity should match the home and the intended heating area. A 1,000-square-foot zone and a 2,000-square-foot open layout can require different output; insulation, ceiling height, and climate also matter. Oversizing can reduce comfort and encourage inefficient low burns.
Chimney dimensions are a major installation variable. A liner run of 15-20 feet may fit a straightforward project, while a 25-foot or taller chimney, offsets, tight access, or damaged masonry can increase labor and materials. If an existing flue is undersized, unlined, or deteriorated, a new stainless-steel liner may add roughly $700-$2,200. Have the installer verify the stove’s listed flue size and the chimney condition before accepting a fixed total.
Freight and installation costs in different U.S. markets
Labor and delivery can vary by location even when the stove price is similar. In smaller markets with nearby installers, a simple replacement may land near the lower end of the labor range. Dense metro areas and regions with higher contractor rates may run roughly 10%-25% above a comparable rural or lower-cost-market installation.
Import availability adds another regional wrinkle: a dealer without local stock may quote added freight or a longer delivery window. Remote addresses, lift-gate service, stairs, or indoor placement can add $100-$500 or more. Compare delivered prices, not just the appliance line item.
Three Dovre installation examples to compare
A direct replacement using an existing compliant chimney may total about $3,500-$5,000: a $2,500-$3,500 stove, $150-$350 delivery, and approximately 6-10 labor hours at $75-$125 per hour. Minor connector parts and inspection charges may be additional.
A mid-size stove with a new liner may total around $5,000-$7,500. That estimate assumes a $3,000-$4,500 appliance, a 15-20-foot liner, standard delivery, and roughly 8-14 labor hours. A longer chimney or difficult roof access can push the quote higher.
A specialty or large model with a complex vent route may reach $7,000-$9,000+. This scenario can include a $4,500-$5,500-plus stove, extra freight, hearth modifications, and chimney repairs. These examples are not model-specific offers; local inspection and dealer stock determine actual pricing.
When repair costs less than replacing a Dovre stove
Replacement is not always the least expensive solution. A door gasket replacement may cost roughly $100-$300 installed, while glass or small hardware repairs can range from $150-$500 depending on parts availability. A cracked firebox component or obsolete part may make repair uneconomical, especially if the stove also needs chimney work.
For older units, ask whether replacement parts remain available and whether the stove can still be installed under current local requirements. A repair quote should state the part cost and labor separately so it can be compared with a new appliance and installation estimate. Compare the full repair total with the replacement cost, not only the stove’s purchase price.
How to lower a Dovre stove project quote
Keep the scope clear before requesting bids. Provide the model or desired output range, photos of the existing stove and chimney, approximate flue height, and notes about stairs or access. Comparable details help prevent one contractor’s quote from excluding work another contractor includes.
Reuse a sound, code-compliant chimney where the installer confirms compatibility, and avoid paying for decorative upgrades that do not affect safe operation. If the hearth needs replacement, ask whether a simpler approved pad meets the stove’s clearance requirements. Scheduling outside the busiest cold-weather period may improve contractor availability, though savings are not guaranteed.
Request at least two itemized estimates with appliance, freight, liner, labor, permit, and disposal listed separately. Check whether sales tax, inspection, and old-unit removal are included. The clearest way to control the final price is to compare identical installation scopes and verify every exclusion.