A Dremel Multipro 395 typically costs $15-$60 used for the tool alone, with many ordinary-condition examples selling around $30. Price depends mainly on whether it runs smoothly, which accessories are included, and whether the seller offers a return window; this older model is generally a secondhand purchase rather than a standard new retail item.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Working tool only | $15 | $30 | $60 | Used; price varies by condition |
| Tool with basic accessories | $25 | $45 | $80 | Includes a few usable bits or attachments |
| Complete used kit | $40 | $65 | $100 | Case and a larger accessory assortment |
| Repair or inspection | $20 | $45 | $90 | Shop charge varies; parts may cost extra |
Assumptions: U.S. secondhand listings, a functioning tool, and no shipping or sales tax.
What a working Multipro 395 usually sells for
For a clean, operating Multipro 395 without a case, a practical target is $20-$40. A tool with visible wear but no known faults may be listed for less, while an unusually clean example with a tested speed control can reach $50-$60. Asking prices are not always completed-sale prices, so comparison should focus on sold listings when available.
A basic kit usually adds value only when its accessories are usable. A case and several common cutting, sanding, or grinding pieces can bring the total to $35-$75; a large assortment may justify more if the bits are intact and appropriate for the buyer’s work. For most buyers, about $30 for a tested bare tool is a reasonable starting estimate.
How the tool, accessories, and shipping shape the quote
The total changes with included parts and the cost of getting the tool to the buyer. A low listing price can become less attractive after shipping or after replacing worn accessories. The table gives typical secondhand add-ons, not guaranteed retail prices.
| Quote component | Typical range | What to check | Budget effect |
|---|---|---|---|
| Multipro 395 tool | $15-$60 | Motor, switch, speed control | Largest share of a bare-tool price |
| Case | $5-$20 | Latch and fitted interior | Useful for storage, not essential to operation |
| Basic bit assortment | $5-$25 | Wear, rust, missing pieces | Value depends on condition and usefulness |
| Shipping and handling | $8-$20 | Seller location and package size | Can outweigh a small discount |
| Sales tax | About 0%-11% | Buyer’s location and marketplace | Applied where required |
Compare the delivered price, not just the listing price. A $22 tool with $16 shipping costs $38 before tax, which may be less compelling than a local $35 tested example.
Why motor condition and kit completeness move the price
Condition is the strongest price variable because a rotary tool that starts is not necessarily dependable at working speed. Ask whether it runs at low and high settings, whether the speed changes smoothly, and whether the seller noticed excessive sparking, burning odor, rattling, or a loose collet. A non-running unit may be useful for parts, but should not be priced like a tested tool.
Accessory count matters less than accessory condition. Several worn sanding drums do not add much value; a sound case, compatible collets, and useful, clean bits are more persuasive. Confirm that the chuck or collet setup included in the sale fits the intended accessories. Pay a premium only for verifiable condition or useful extras, not an untested claim of “like new.”
Can Multipro 395 accessories still be used?
Many standard Dremel rotary-tool accessories are designed around common small-shank sizes, but compatibility depends on the accessory and the 395’s collet or chuck. Check the shank diameter printed on the accessory and confirm the tool’s supplied collet accepts it. A multi-size collet set or compatible chuck may add roughly $8-$25, while specialty attachments can cost more.
Do not assume every newer attachment fits just because it carries the Dremel name. Attachment connections, clearances, and tool features vary by model. If an accessory is central to the purchase, ask for a photo of its connection and test-fit details before paying. Verify the exact accessory interface before valuing a kit as complete.
Repairing a 395 versus buying another rotary tool
A small repair may make sense when the tool is otherwise sound and the owner can safely replace a simple part. Carbon brushes, a cord, or a switch may cost roughly $5-$25 in parts, but labor from a repair shop can raise the bill substantially. A professional diagnostic or bench fee may be $20-$50 even if the buyer declines the repair.
For a motor or speed-control problem, a shop quote of $60-$100 can exceed the value of an ordinary used 395. A current entry-level rotary-tool kit may cost about $40-$100, depending on brand, variable-speed features, and accessories. At $60-$100 per labor hour, one hour of service can erase the savings from buying an older tool. Set a repair limit before authorizing labor.
What a local or shipped purchase can add
Local pickup can avoid shipping and lets a buyer request a quick run test, but local inventory may be thin. Online marketplaces offer more choice and may show seller ratings or return terms, though shipping commonly adds $8-$20 and returns can be inconvenient. Specialist used-tool sellers may charge more than private sellers but sometimes provide testing or a short return period.
Regional price differences are less predictable for this discontinued model than for new equipment. In a large metro area with active resale listings, selection may be better and asking prices easier to compare. In rural areas, fewer listings can mean travel costs or shipping; either can add $10-$30 to the effective purchase. Include travel, shipping, and return protection when comparing sellers.
Three realistic Multipro 395 purchase totals
| Example | Tool and extras | Other charges | Estimated total |
|---|---|---|---|
| Local bare tool | Tested 395, $28 | $0 shipping; about $2 tax | $30 |
| Shipped basic kit | Tool, case, bits, $42 | $12 shipping; about $4 tax | $58 |
| Needs minor repair | Tool, $15; parts, $12 | $35 labor; about $3 tax | $65 |
These examples assume a local sales-tax rate near 7% and illustrate how a low tool price can rise once shipping or repair is included. The repair example also assumes the shop accepts the job at the stated labor charge.
How to keep the used-tool price under control
Set a delivered-price ceiling based on the tool’s condition and the cost of a new alternative. Request a short video showing startup and speed changes, and ask whether the cord, collet, and case are included. If the seller cannot test it, price it as an unverified tool rather than paying a working-tool premium.
Skip a large accessory bundle if most pieces are worn or unrelated to the planned task. Compare at least three listings, including completed sales when accessible, and avoid paying extra for a case unless it is needed. A tested bare tool near $30 can be better value than a $70 kit with questionable bits. Keeping the purchase limited to a tested tool and accessories the buyer will use is the simplest way to control cost.