Ductless range hood installation typically costs $200-$900, with a national average near $450 for a straightforward replacement or new installation. The final price depends on cabinet and wall work, electrical access, hood size, and whether the old unit needs removal.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed ductless hood | $200 | $450 | $900 | Labor and basic mounting; hood may be extra |
| Hood unit | $80 | $250 | $800 | Basic, midrange, and premium models |
| Installation labor | $120 | $300 | $600 | Usually 2-5 hours |
| Filter replacement | $10 | $30 | $80 | Per charcoal filter, depending on model |
What a ductless hood installation usually includes
A basic installation is often $200-$500 when the hood is already purchased and an existing unit can be replaced without changing the cabinet, wiring, or mounting surface. A new installation commonly reaches $350-$900 because the installer may need to locate studs, drill mounting holes, add a receptacle, or adapt the cabinet.
Including the appliance, a typical total is $300-$1,100. A standard 30-inch, under-cabinet hood with a fan and charcoal filter often costs $100-$350; a higher-output or designer model may cost $400-$800 or more. Assumptions: standard 30-inch hood, ordinary access, no major electrical or cabinet repair.
Budget about $450 for a routine installation, or more when the work involves electrical changes or cabinet modifications.
How installer hours and electrical access affect labor
Installers commonly charge $50-$125 per hour, with a service minimum of roughly $100-$200. A direct replacement may take 2-3 hours; a first-time installation often takes 3-5 hours. Some contractors quote a flat installation fee rather than billing by the hour.
For example, 3 hours at $75-$125 per hour equals $225-$375 in labor before a trip charge or materials. A nearby, properly grounded outlet keeps the job simpler; adding a new circuit can add $150-$500 or more, depending on the route and panel capacity.
Confirm whether the quote includes the visit, wiring, mounting hardware, and removal before comparing labor prices.
Which parts of the hood quote carry the price
Quotes vary in what they include, so check whether the appliance, disposal, and electrical work are included. The table shows typical U.S. ranges for a standard residential job; complex work can exceed them.
| Quote item | Typical price | What changes the charge |
|---|---|---|
| Hood and standard filter | $100-$350 | Width, fan settings, finish, and controls |
| Mounting labor | $120-$400 | Replacement versus new installation |
| Electrical materials and work | $0-$500 | Existing outlet, wiring route, and circuit needs |
| Cabinet or wall adjustment | $50-$300 | Cutting, reinforcement, or patching |
| Removal and disposal | $25-$100 | Old hood handling and local disposal fees |
The hood itself is only part of the total; mounting and electrical work can account for a similar or larger share.
When charcoal filters and cabinet work add extra charges
Ductless hoods recirculate kitchen air through filters rather than sending it outdoors. Most use a washable grease filter plus a replaceable charcoal filter, which may be sold separately for $10-$80 each. Check the model’s filter cost and availability before buying; some premium systems use multiple or proprietary filters.
Cabinet adjustments commonly add $50-$300 when the opening, underside, or mounting points do not match the new hood. Reinforcing a weak cabinet or repairing damaged tile can raise the bill further. Removing and disposing of an old unit may add $25-$100, while a delivery or service-call charge can add another $50-$150.
Measure the cabinet width and depth and verify the hood’s mounting pattern to avoid paying for avoidable rework.
Why hood width, mounting height, and wiring change the estimate
Width is a major price and fit variable. A 30-inch hood is common, while 36-inch models may cost more and require a wider cabinet or additional mounting support. Match the hood width to the cooking surface and follow the manufacturer’s specified clearance above the range; moving a hood to meet that clearance can require cabinet or backsplash work.
Electrical scope is another threshold. A plug-in hood with an outlet within a few feet of the mounting location is generally simpler than a hardwired unit or one needing a new circuit. A 400-cubic-feet-per-minute model may cost less than a 600-CFM model, but confirm that the appliance is designed for recirculation; higher airflow alone does not guarantee better odor removal.
Before accepting a quote, compare the hood’s width, mounting instructions, electrical type, and included filter against the actual kitchen setup.
Three common ductless hood quotes by project scope
A simple replacement can cost about $250-$500 installed: a $150-$250 hood, 2-3 labor hours, and no electrical changes. A new 30-inch under-cabinet installation may total $450-$850, including a $200-$350 hood, 3-4 hours of labor, and modest mounting adjustments.
A premium 36-inch hood with cabinet reinforcement and a new outlet can reach $900-$1,500. That estimate might include a $400-$800 appliance, 4-6 labor hours, electrical work, and disposal. These examples are planning ranges, not fixed bids; regional rates and site conditions can change totals.
Ask each contractor to separate appliance price, labor hours, electrical work, and add-ons so the scope can be compared line by line.
How to lower the installation price without cutting essentials
Buying a standard-size hood that fits the existing cabinet can avoid carpentry charges. Measure the opening, confirm the outlet location, and select a model with readily available replacement filters. If the existing hood is structurally sound, replacing a worn filter or switch may cost less than installing a new unit, though a motor failure can make replacement more practical.
Get at least two itemized estimates and ask whether the installer will remove the old hood. Scheduling during a contractor’s less busy period may improve availability, but do not assume a discount. Avoid paying for ductwork when the selected product is genuinely ductless; instead, verify that recirculating operation and the necessary charcoal filter are included.
The largest controllable savings usually come from a hood that fits the existing space and a quote with no unnecessary electrical or cabinet work.
How local labor rates shift ductless hood prices
Labor and service-call charges vary by market. Large metropolitan areas and high-cost coastal markets may run about 15%-30% above a typical national estimate, while many rural areas may be 5%-20% below it. These differences are not guaranteed: travel distance, contractor availability, and local electrical rates can matter more than the city name.
For a $450 routine installation, a 15%-30% premium could put the same scope near $520-$585; a 5%-20% discount could bring it to roughly $360-$430. Local permit rules may apply when new circuit work is added, though a like-for-like hood replacement often does not require a permit. Assumptions: percentage comparison applies to labor and service charges, not necessarily the appliance price.
Use local written quotes with matching hood specifications and electrical scope, rather than relying on a national average alone.