An Echo CS-600P typically costs about $600-$750 new when available, while used saws commonly list for $250-$450. Final price depends on dealer inventory, bar and chain configuration, condition, shipping, and local sales tax.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New CS-600P | $600 | $675 | $750 | New or remaining dealer stock; before tax |
| Used CS-600P | $250 | $350 | $450 | Price depends on maintenance and wear |
| Replacement bar and chain | $50 | $85 | $130 | Varies by length and component grade |
| Sales tax | $0 | $40 | $75 | Illustrative tax on a $675 purchase |
What an Echo CS-600P Usually Costs New
Plan on roughly $600-$750 before tax for a new CS-600P, if a dealer still has one in stock. This is a professional 59.8cc gas chainsaw, and the price is for the powerhead or a standard package rather than a complete cutting and safety setup. Because availability can be limited, some listings may be higher than typical retail pricing.
At a $675 midpoint, buyers in an area with 6%-10% sales tax would pay about $716-$743 at checkout. Shipping, if the saw is purchased remotely, can add roughly $20-$60. Confirm whether the listing includes a bar, chain, scabbard, and dealer setup before comparing prices.
Assumptions: U.S. dealer or online pricing for new stock, standard configuration, no unusually high shipping charge, and tax excluded unless noted.
How Bar, Chain, and Dealer Prep Shape the Receipt
The saw itself is usually the largest expense, but accessories and setup can move the out-the-door total. The ranges below are typical planning amounts, not guaranteed dealer charges. Package contents differ, so a low advertised price may not include every item needed to start cutting.
| Quote item | Typical price | What changes it | Budget note |
|---|---|---|---|
| CS-600P saw | $600-$750 | Stock and dealer pricing | Check included bar and chain |
| Bar and chain | $50-$130 | Length, pitch, and quality | Longer setups can cost more |
| Dealer setup | $0-$50 | Included prep or service policy | Ask about adjustment and inspection |
| Safety gear | $100-$300 | Chaps, helmet, eye and ear protection | Often purchased separately |
| Shipping and delivery | $0-$60 | Seller and delivery method | May be waived for local pickup |
A complete purchase with basic protective equipment can reach $750-$1,100 before tax, depending on gear already owned. Fuel, bar oil, and a sharpening file are smaller ongoing expenses, but should be included in a first-use budget.
How 20-Inch Bars and 60cc Specs Change the Quote
Bar length, included equipment, and saw condition are the clearest reasons two CS-600P listings differ. A standard 20-inch bar is a common configuration; a 24-inch setup may cost more if it requires a different bar and chain package. The longer bar also increases cutting demands, so it should be chosen for the work rather than as a price upgrade alone.
The 59.8cc engine places this model in a larger professional-saw class than many homeowner saws. A price near $600-$750 is plausible for clean new inventory with ordinary accessories; a listing above $800 deserves a careful comparison with current alternatives and a check of what is included. Extra chains, premium bars, and bundled cases can add $30-$150 or more.
For used saws, condition can outweigh the listed configuration. A machine that starts easily, idles consistently, oils the bar, and has sound compression may command a higher price than one with a long bar but unknown service history. A damaged clutch, worn sprocket, or carburetor problem can turn an apparently cheap saw into a costly project.
Dealer Availability and Regional Price Gaps
Local inventory can matter more than geography because older or limited-stock models are not priced uniformly. In larger metro areas with several dealers, buyers may find more opportunities to compare offers. Rural buyers may face a longer drive, shipping charges, or fewer choices; those factors can add $25-$100 to the practical purchase cost.
As a planning estimate, ordinary regional differences may put a comparable saw about 5%-10% above or below the midpoint, before tax. This is not a fixed regional tariff: retailer inventory, online promotions, and whether the seller includes dealer preparation can have a larger effect. Request an out-the-door quote with the exact bar length and included accessories.
What Do Used CS-600P Saws Sell For?
Most used examples are worth comparing in the $250-$450 range, with documentation and operating condition supporting the upper end. A rough-running saw or one sold as-is may be closer to $150-$250, while a clean, recently serviced example with a usable bar and chain may approach $400-$450. These are practical listing estimates; local sale prices can differ.
Before paying, ask for a cold start and warm restart, and check chain-brake function, oil delivery, throttle response, and visible leaks. Inspect the guide bar rails, chain, sprocket, and starter cord. If the seller cannot demonstrate operation, reserve $100-$250 for diagnosis or repairs, or price the saw as a non-running project.
When Repairing a CS-600P Beats Replacing It
Small wear-item repairs can preserve value, but major engine work can erase the savings on a used purchase. A new chain or sharpening service may cost about $15-$40; a replacement bar and chain can run $50-$130. A shop diagnosis or tune-up commonly adds $50-$120, depending on the shop and work performed.
Carburetor service, ignition parts, or clutch work can bring a repair bill into the $100-$300 range. Ask for a written estimate before authorizing work, especially if the saw needs several parts. A repair approaching half the price of a sound used saw merits comparison with another used unit or a new model.
Ways to Keep a CS-600P Purchase Within Budget
Compare complete, matching quotes rather than choosing the lowest advertised number. Ask at least two dealers or sellers for the saw price, bar length, chain type, setup fee, shipping, and tax. A $650 local quote with setup may be less expensive than a $625 listing that adds shipping and missing accessories.
Buy only the bar length needed for the usual work, and avoid paying extra for bundled items that are already owned. For used purchases, a professional inspection can be more economical than guessing at engine condition. If new CS-600P stock is scarce and priced above $800, compare current saws with similar displacement and service support before committing.