An ECHO PAS-225 typically costs about $250-$350 for the powerhead alone, while a package with a string-trimmer attachment commonly runs $350-$450 when available. The final price depends on whether the unit is new, used, or old dealer inventory, which attachments are included, and local taxes or setup charges.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| PAS-225 powerhead, new or remaining stock | $250 | $300 | $350 | Price varies with dealer inventory and condition. |
| Powerhead with trimmer attachment | $350 | $400 | $450 | Confirm the attachment and harness, if any, are included. |
| Used powerhead | $100 | $175 | $250 | Running condition, wear, and included parts affect value. |
| Compatible attachment, purchased separately | $80 | $140 | $250 | Price depends on attachment type and whether it is genuine ECHO. |
What an ECHO PAS-225 Powerhead Usually Costs
For a new or unsold PAS-225 powerhead, a practical budget is $250-$350 before tax. Around $300 is a reasonable midpoint for a unit sold through a servicing dealer, though availability can be limited because this is an older model and current listings may represent remaining stock rather than a standard new-product price.
The PAS-225 is a 21.2 cc gasoline powerhead in ECHO’s PAS multi-attachment system. A powerhead-only price does not necessarily include a trimmer head, shaft attachment, blade, shoulder harness, fuel, or assembly. A package with a string-trimmer attachment is generally closer to $350-$450, depending on what the seller bundles.
Used listings can fall below new-stock pricing, but a low asking price is not equivalent to a tested, ready-to-work unit. A used powerhead around $100-$250 may need a carburetor service, fuel lines, a replacement starter, or a compatible attachment. Assumptions: U.S. retail pricing, standard configuration, before sales tax, with no unusual shipping or repair needs.
How the Shaft, Trimmer Head, and Setup Shape the Quote
Dealers may quote the PAS-225 as a powerhead, a bundled trimmer, or a complete multi-attachment package. Ask for an itemized quote because descriptions such as “trimmer package” may refer to different components. The distinction matters when comparing a low-priced bare powerhead with a higher-priced ready-to-cut kit.
| Quote component | Typical price | What to verify | Common extra charge |
|---|---|---|---|
| PAS-225 powerhead | $250-$350 | Engine, handle, shaft coupling, and included controls | $0-$30 for setup or inspection |
| String-trimmer attachment | $80-$150 | Cutting head, guard, and attachment shaft | $15-$40 for a replacement head or line |
| Other PAS attachment | $100-$250 | Correct PAS coupling and intended use | $10-$50 for blades, line, or small parts |
| Dealer preparation | $0-$40 | Assembly, test run, and fuel-system check | Fuel or shop supplies may be separate |
| Tax and delivery | $0-$50+ | Local tax rate and delivery distance | Shipping can be higher for bulky bundles |
A common total for a new powerhead and standard trimmer attachment is about $330-$500 after setup and tax, depending on the local rate and included equipment. Compare the same configuration, not just the advertised powerhead price. If buying only the powerhead, price the attachment needed for the job before deciding the offer is inexpensive.
For dealer-installed add-ons, labor can be estimated as . Many attachments need little installation, so a shop may charge a small setup fee rather than a full hourly labor rate. A repair estimate is different: ask whether diagnostic charges apply toward the final repair bill.
Which PAS-225 Details Move the Price Most
Included equipment is the biggest immediate price difference. A bare powerhead may be $80-$150 less than a bundle that includes a string-trimmer attachment. A package with multiple attachments can cost more, but it is only a value if the included tools are compatible and useful for the buyer’s work.
Condition changes used prices substantially. A clean unit that starts easily, idles, accelerates, and drives the attachment shaft is usually worth more than a non-running unit. A seller’s claim that it “only needs a tune-up” is not a diagnosis; carburetor, ignition, compression, and fuel-system problems can turn a $150 purchase into a more expensive repair.
Attachment compatibility is another model-specific check. PAS attachments use a connection system intended for ECHO PAS powerheads, but buyers should confirm the exact attachment model and fit rather than assume every ECHO tool or third-party shaft will connect. An incompatible attachment can erase the savings from a cheaper listing.
Age and parts condition also matter. Inspect the drive coupling, shaft, throttle controls, guard, and starter assembly. If a used unit needs several repairs, a replacement powerhead or a complete current trimmer may be more economical. Regional dealer stock can further widen the spread, especially where a seller has remaining inventory or offers service with the purchase.
Where Buyers Can Trim the PAS-225 Purchase Price
Start by buying only the equipment required for the immediate job. If the PAS-225 is being used only for trimming, compare the bundled trimmer price with a powerhead-plus-attachment quote. Avoid paying extra for an edger, pruner, or brush-cutter attachment unless those tools are genuinely needed.
For used equipment, arrange a cold start and operating test before paying. Check that the engine starts without excessive cranking, stays running at idle, responds to throttle, and does not make unusual noises. Confirm that the seller includes the guard, cutting head, and any advertised attachment. A missing part may add $15-$100 or more, depending on what is needed.
Request written, itemized quotes from at least two local dealers if new stock is available. Compare the out-the-door amount, setup, warranty terms, and included attachments. A dealer price $20 higher may be preferable if it includes assembly and a documented service check; a low online price may not include shipping or local support.
Use an existing compatible PAS attachment when practical, but confirm fit and condition first. Do not buy a worn or damaged attachment solely to get a lower package price. The cheaper choice is the one that avoids unnecessary equipment while still covering the complete cost of a working setup.
Three PAS-225 Purchase Scenarios and Their Totals
A powerhead-only purchase suits someone who already owns a compatible attachment. For example, a $285 powerhead plus $20 dealer setup and $18 sales tax comes to roughly $323, assuming the tax applies to the full purchase. This does not include an attachment, fuel, or future maintenance.
A ready-to-trim bundle is more appropriate when the buyer needs the cutting attachment too. A $395 package, $25 setup charge, and about $25 tax would total approximately $445. Check whether the trimmer head and guard are included, and whether the bundle price covers a new or remaining-stock unit.
A used powerhead can be the lowest-cost route if it passes inspection. A $150 unit plus a $35 replacement cutting head and $25 in basic parts totals $210 before tax or labor. If a shop charges $75-$125 per hour and the repair takes 1-2 hours, a seemingly inexpensive unit can reach $285-$460. Examples are estimates, not dealer quotes; local tax, repair scope, and parts availability change totals.
Dealer Setup and Repair Charges to Check Before Paying
Many buyers can attach a compatible PAS tool without paying for professional installation. Dealers may nevertheless charge $0-$40 for inspection, assembly, or a test run. Ask whether the unit is sold ready to operate and whether the package includes any initial setup or fuel-system check.
Repair labor is a separate cost from purchase setup. Small-engine shops commonly charge around $75-$125 per hour, sometimes with a minimum diagnostic fee of $25-$75. A basic tune-up or fuel-system service may fall around $75-$200, while more extensive carburetor, starter, or shaft repairs can exceed $200 depending on parts and time.
Before authorizing work, request the diagnostic fee, labor rate, parts estimate, and approval threshold in writing. On an older powerhead, compare the repair total with the cost of a tested used unit or a new complete trimmer. Ask whether the shop can still source the required parts for the specific PAS-225 configuration.
New PAS-225 Stock Compared With Used and Replacement Options
Remaining new stock may be attractive when a dealer can confirm the unit’s condition, included equipment, and warranty coverage. Verify warranty terms directly because coverage can depend on seller, product status, and purchase documentation. Do not assume an old listing carries the same coverage as a current model sold through an authorized retailer.
Used powerheads cost less upfront, typically $100-$250, but carry more condition risk. Request a demonstration and inspect the coupling and shaft for damage. If the engine is not running, value it as a repair project rather than pricing it like a working tool; even a modest service bill can consume the initial discount.
A complete current string trimmer is a useful comparison if no PAS attachment is already owned. A gas trimmer in a similar consumer-duty range may cost about $200-$400, while a multi-attachment powerhead package can run higher. Compare engine class, included accessories, warranty, and whether future attachments are part of the plan. A lower-priced dedicated tool may be better value for trimming alone.
Why Local Inventory Can Change the ECHO PAS-225 Price
Local availability can matter more than broad regional averages for an older model. Areas with an ECHO dealer carrying remaining stock may offer a straightforward powerhead or bundle, while other locations may have only used listings or special-order options. Shipping a powerhead or attachment can add roughly $20-$75, depending on seller, package, and delivery method.
In higher-cost metro markets, dealer labor and setup may run about 5%-15% above lower-cost rural markets. That difference is not guaranteed, and the price of used equipment may move in the opposite direction depending on local demand. Sales tax also varies by state and locality, so a listed $300 price can become roughly $315-$330 before delivery or setup in many tax jurisdictions.
For a reliable comparison, ask nearby dealers for the same configuration and request the full out-the-door figure. For online or private-party listings, add shipping, missing attachments, and likely maintenance before comparing with a local package. A realistic target is about $300 for a bare powerhead or around $400 for a powerhead with a basic trimmer attachment, before local extras.