Edco steel siding prices vary by panel type, finish, region, and installation scope. This guide outlines typical cost ranges in USD, plus drivers like material grade, labor, and added trims. The goal is to help homeowners estimate the total price for Edco steel siding projects and compare quotes confidently.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed cost per sq ft | $6.00 | $9.50 | $14.00 | Includes materials, labor, and basic accessories |
| Installed cost per linear ft (panel edge) | $11.00 | $16.50 | $25.00 | Per edge trim or fascia along a wall |
| Complete siding project (1,500 sq ft home) | $9,000 | $14,250 | $22,500 | Assumes standard 5-inch exposed reveal |
| Material-only cost per sq ft | $4.50 | $6.50 | $8.50 | Edco panels, coatings, and fasteners |
| Labor for installation per hour | $40 | $72 | $110 | Varies by crew size and region |
Typical Edco Steel Siding Price Range by Panel Size
Prices reflect standard 26-gauge steel with factory coatings in common colors. The exposed panel width, interlock type, and hidden fasteners influence costs. Assumptions: Midwest labor rates, standard 8–12 ft wall heights, normal access, and typical two-story home.
For a 2,400 sq ft home, installed costs typically fall in the mid-range per square foot, with higher costs from premium colors or added insulation backing. Expect ranges to shift up or down by region and project scope.
| Panel Width | Low per sq ft | Average per sq ft | High per sq ft | Notes |
|---|---|---|---|---|
| 5.0 in | $5.50 | $9.00 | $12.50 | Most common exposure |
| 6.0 in | $6.25 | $9.75 | $13.00 | Greater coverage, lower labor |
| 7.5 in | $6.75 | $10.25 | $14.50 | Premium look, higher waste risk |
Labor and materials dominate the quote, with site-specific factors pushing totals higher or lower. A typical breakdown includes materials, labor, and removable or add-on items. Assumptions: standard trim, sealants, and fasteners are included; no structural repair.
| Cost Component | Low | Average | High | What drives change |
|---|---|---|---|---|
| Materials | $2.50 | $4.00 | $6.50 | Panel count, color, finish, and insulation backing |
| Labor | $3.00 | $5.50 | $8.50 | Crew size, slope, and access ease |
| Equipment | $0.50 | $1.50 | $3.00 | Lifts, scaffolding, and cutting tools |
| Permits | $0 | $200 | $1,200 | Local code and project scope |
| Delivery/Disposal | $0.50 | $1.00 | $2.50 | Material handling and job-site waste |
| Warranty | $0 | $200 | $500 | Limited vs extended coverage |
Finish quality adds upfront cost but affects longevity and resale value. A factory-applied Kynar or PVDF coating costs more than basic enamel, yet it improves fade resistance and weathering. Assumptions: mid-range coating, standard color options, and no custom artwork.
Regional pricing gaps can exceed 20% between markets with higher labor rates or stricter permitting. Northern states and coastal markets often show higher installed costs than rural Midwest areas. Assumptions: average market conditions, standard access, and typical two-story homes.
Crew size and job duration strongly influence total price. A two-person crew may finish faster than a larger crew on complex elevations, but equipment costs rise with crew size. Assumptions: 1,200–2,400 sq ft projects, typical lot access.
Finishes range from standard gray to premium baked enamel colors, with corresponding price tiers. Premium finishes incur higher per-square-foot costs but may offer longer warranties. Assumptions: no special texture or color-matching requirements.
Adding soffits, fascia, and corner posts increases project price significantly. Including moisture barriers, corner trims, and flashing can add per-sq-ft and per-linear-ft costs. Assumptions: basic trim included; no major structural modifications.
Concrete quotes help buyers benchmark regional pricing and scope. The following examples illustrate typical setups with labor hours and per-unit pricing. Assumptions: standard two-story home, mid-grade finish, and normal access.
- Edco Siding, 1,800 sq ft, 5-inch panel, mid-range color: Installed cost $10,000-$14,000 with 180–220 labor hours at $40-$70 per hour.
- Edco Siding, 2,400 sq ft, premium finish, added insulation backing: Installed cost $16,000-$22,500 with 210–260 hours at $60-$95 per hour.
- Edco Siding, 1,200 sq ft, standard finish, basic trim: Installed cost $7,500-$10,500 with 120–160 hours at $45-$75 per hour.
Scope control and smart material choices yield meaningful savings. Consider keeping to standard colors, avoiding custom flashing, and planning work outside peak demand months. Assumptions: similar climate, no structural repairs, and access remains typical.