Electric garage doors fitted prices typically range from $1,200 to $4,500 for a standard residential replacement, including the door, opener, and installation. Door size and material, opener type, removal of the old door, and local labor rates are the main cost drivers.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Single garage door with opener | $1,200 | $2,200 | $3,800 | Common 8-by-7-foot opening |
| Double garage door with opener | $1,800 | $3,200 | $5,500 | Common 16-by-7-foot opening |
| New opener only | $450 | $750 | $1,200 | Installed on a compatible door |
| Door and opener per sq ft | $25 | $45 | $75 | Varies by material and insulation |
What a fitted electric garage door costs by size
A standard insulated steel door with a midrange opener usually costs $1,500-$2,800 installed for a single opening. A double door often runs $2,300-$4,200, while premium wood-look finishes, custom dimensions, or high-cycle hardware can push a complete project above $5,000.
These totals generally cover the door, tracks, springs, opener, standard installation, and basic testing. A like-for-like replacement with sound framing is less expensive than a new opening that needs structural work or electrical changes. Assumptions: standard residential sizes, ordinary access, midrange steel door, and typical U.S. labor rates. For budgeting, allow about $2,200 for a single door and $3,200 for a double door with an opener.
How door, opener, and labor charges shape the quote
Quotes can bundle parts and labor or list them separately. Comparing the included hardware and removal charges helps reveal whether a lower bid leaves out necessary work.
| Quote component | Typical range | What it covers | Pricing basis |
|---|---|---|---|
| Door panels and track | $600-$2,400 | Basic steel through insulated or decorative models | $15-$45 per sq ft |
| Opener and accessories | $250-$800 | Motor, rail, remotes, and standard safety sensors | $150-$500 equipment |
| Installation labor | $300-$800 | Door assembly, balancing, opener setup, testing | $75-$125 per hour |
| Old door removal | $75-$250 | Take-down and disposal, when not included | Per opening |
| Permits or electrical work | $0-$500 | Local permit or new outlet and wiring | Job-dependent |
A straightforward replacement typically takes 4-8 hours for a two-person crew; new framing or wiring can add time. Confirm whether removal, haul-away, opener programming, and permit fees are included before comparing totals.
Which opening size and door material change the price most
Width and height affect panel area, track length, spring capacity, and installation time. A single 8-by-7-foot opening is a common baseline; a 16-by-7-foot double opening needs larger components, while an 8-by-8-foot opening may require a taller door and different tracks.
Basic noninsulated steel is usually the least expensive choice. Insulated steel often adds $200-$700, depending on thickness and construction. Aluminum and glass designs may add $500-$2,000 or more; custom wood doors can exceed $4,000 for the door alone. For many homes, a standard insulated steel model balances durability and price without custom sizing.
Opener capacity matters as well. A standard ½-horsepower unit generally suits a typical single door; heavy, oversized, or wood doors may call for a ¾-horsepower or stronger model, often adding $100-$300. Wind-rated doors and upgraded springs can add $150-$600, especially where local code or exposure requires higher resistance.
What can add cost during an electric door installation
Uneven framing, damaged jambs, low ceilings, or restricted vehicle access may require extra carpentry or nonstandard track arrangements. Repairs commonly add $150-$700, but extensive structural work can cost more. A new outlet or circuit can add roughly $150-$500 if the opener location has no suitable power supply.
Smart controls, battery backup, keypad entry, and upgraded remotes may add $40-$300 each, depending on the device and whether installation is included. Ask the installer to separate required repairs from optional accessories on the written estimate.
When is replacing only the opener cheaper?
If the door moves smoothly, stays balanced, and has undamaged tracks and springs, replacing the opener alone can cost $450-$1,200 installed. A chain-drive model is often the lower-cost option; belt-drive and smart models can cost more but may run more quietly or offer app controls.
A worn, unbalanced door can strain a new motor, so an opener-only quote should include a door and spring check. Door replacement is more practical when panels are bent, the track is damaged, or repair costs approach the price of a new standard door. Repairing a sound door and replacing only its opener can avoid a larger door-and-hardware bill.
How regional labor rates shift fitted door prices
Installation prices tend to run higher in major coastal cities and other high-cost metro areas than in many rural markets. As a planning estimate, metro quotes may be 10%-25% above the national middle, while rural quotes can be 5%-15% below it; travel charges may narrow that difference for remote locations.
Local weather and building rules also affect equipment choices. Wind-rated doors may be required in some coastal or storm-prone areas, and cold climates often make insulated panels more attractive. Compare quotes from installers serving the same area and ask whether local code upgrades are included.
How to compare labor hours and installer quotes
For a standard replacement, a two-person crew commonly completes removal, fitting, opener setup, and testing in 4-8 hours. A new installation with framing changes can take a full day or longer. Labor charges commonly fall around $300-$800 for a straightforward job, but hourly pricing and minimum service fees differ by company.
Request an itemized estimate that identifies door model, insulation, opener drive type, spring warranty, disposal, and labor. Check that the quote includes safety-sensor testing and door balancing, not just assembly. Two quotes are comparable only when they specify similar door dimensions, hardware, and installation scope.
Which choices lower the fitted price without cutting essentials
Keep the existing opening dimensions when possible, select a standard steel finish, and avoid accessories that are not needed. Schedule nonurgent work during periods when local installers have availability, and ask whether combining the door and opener installation reduces a separate service charge.
Get at least three written quotes and compare the same specifications. Do not save money by reusing damaged springs or skipping safety sensors; incorrect spring sizing can make a heavy door unsafe and shorten opener life. Controlling custom features and confirming the scope usually saves more safely than removing essential hardware.