An electric gas stove, commonly sold as a dual-fuel range with a gas cooktop and electric oven, typically costs $1,200-$3,000 before installation. Buyers may spend $1,500-$4,000 total, depending on range width, features, delivery, and whether the kitchen needs new gas or electrical connections.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Dual-fuel range | $1,200 | $2,100 | $5,000+ | Appliance only; premium models can exceed the high estimate |
| Delivery and installation | $150 | $350 | $900 | Basic hookup versus connection upgrades |
| Typical total project | $1,500 | $2,500 | $6,000+ | Includes a midpriced range and standard installation |
Assumptions: U.S. pricing, a standard 30-inch range, and no major kitchen remodeling.
What a 30-inch dual-fuel range usually costs
Most 30-inch dual-fuel ranges cost $1,200-$3,000, with an approximate $2,100 midpoint for a mainstream model. Entry-level units may have basic gas burners and a conventional electric oven; higher-priced models can add convection, a self-cleaning cycle, stronger burners, or a larger oven capacity. Pro-style and premium models may cost $4,000-$8,000 or more.
For a standard replacement, budgeting about $2,500 installed is a reasonable starting point. That estimate assumes an existing gas line and compatible 240-volt outlet. A 36-inch range, custom cabinetry work, or new utility connections can raise the total substantially.
How appliance, hookup, and delivery charges add up
Installation quotes vary with what the retailer includes. Ask whether delivery, removal of the old range, gas connection, anti-tip bracket, and electrical connection are included or charged separately. A basic swap is very different from a job that needs a new circuit or extended gas piping.
| Quote component | Typical price | What changes the charge |
|---|---|---|
| Range appliance | $1,200-$3,000 | Width, capacity, brand, and cooking features |
| Labor | $100-$300 | Access, hookup complexity, and installer minimum |
| Gas connection | $75-$250 | Existing shutoff, connector length, and code requirements |
| Electrical work | $150-$800 | Outlet condition, circuit capacity, and wiring distance |
| Delivery and haul-away | $50-$200 | Stairs, distance, and disposal service |
Labor commonly works out to $75-$150 per hour, although installers may charge a flat rate.
Connection work, not just the appliance price, can determine the final bill. Local permit fees or inspection charges may apply when gas piping or electrical circuits are modified.
Why gas-line length and circuit capacity change the quote
A dual-fuel range needs both a gas supply for the cooktop and an appropriate electrical connection for the oven. Replacing a similar model in the same location is generally less expensive than converting from an electric-only or gas-only range. A new gas branch line can add roughly $300-$1,000, while a new 240-volt circuit may add $400-$1,500, depending on panel capacity and wiring route.
Range size also matters. A 30-inch unit is the common replacement size; a 36-inch model can cost $2,500-$8,000 or more and may require different cabinetry or ventilation. A long gas-pipe run, a crowded electrical panel, or a finished wall that must be opened can add several hundred dollars or more.
Check the appliance specifications before ordering. Confirm the required voltage, amperage, gas type, dimensions, and clearance so the installer can identify upgrades before delivery.
Which costs rise when the kitchen needs new connections?
When an existing range already has compatible connections, installation may take about 1-2 hours and cost $150-$350 including a basic delivery or hookup charge. Adding a gas line or electrical circuit can extend work to half a day or longer, especially if an electrician and plumber must coordinate. Typical trade rates range from $75-$150 per hour, with minimum service charges often applying.
Conversion work has extra requirements. A home switching from an electric range to dual fuel needs a gas supply, while one switching from gas-only may need a dedicated 240-volt circuit. The utility provider, local code, and condition of the panel can affect the scope. Get separate written prices for the appliance, delivery, gas work, and electrical work.
How regional labor rates shift installed stove prices
Labor and delivery prices are often 10%-25% higher in major coastal cities and high-cost metro areas than in lower-cost rural markets. Rural buyers may face a trip or travel charge, while urban homes can incur added fees for stairs, parking restrictions, or difficult building access. Appliance prices also vary with retailer promotions and local inventory.
These differences usually affect installation more than the range itself. A $250 basic hookup may approach $400-$600 in a high-cost market if extra labor or building access is involved. Compare local quotes using the same appliance model and the same list of included services.
Three realistic dual-fuel range budgets
A straightforward replacement might include a $1,500 range, $150 delivery, and $200 installation, for a total near $1,850. This assumes a compatible gas line and outlet already exist. A midrange purchase could include a $2,400 range, $200 delivery and removal, and $350 for hookup and minor adjustments, totaling about $2,950.
A more involved upgrade might include a $3,500 range, $600 in gas-line work, $900 for a new circuit, and $250 delivery and disposal, bringing the project to about $5,250. These examples show why an appliance-only price is not a complete installed estimate. Local labor, permits, and access can move totals above or below these examples.
Dual fuel versus separate electric and gas ranges
A dual-fuel range combines a gas cooktop and electric oven in one appliance; it is not the same as buying a separate electric range and gas cooktop. Standard gas ranges often cost about $600-$2,000, while standard electric ranges commonly cost $500-$1,800. Dual-fuel models usually carry a higher purchase price and need both utility connections, but they avoid installing two separate cooking appliances.
For a lower-cost replacement, a standard gas or electric range may be a practical alternative if the existing kitchen setup supports it. Replacing a working range solely to gain convection or specialty burner features may not justify the added expense. Compare the installed total and required connections, not just the appliance sticker price.
Ways to cut the price without losing needed features
Keeping the current range width and location can limit cabinetry and utility work. Before purchase, verify that the existing gas shutoff and 240-volt outlet meet the new model’s requirements. Choose features that will be used regularly; premium finishes, smart controls, and specialty cooking modes can raise the price without reducing installation expense.
Request itemized quotes from at least two installers, and compare delivery, haul-away, connector parts, permits, and warranty terms. Retailer promotions can reduce the appliance cost, but a low advertised installation fee may exclude electrical upgrades or gas-line changes. Confirm the complete installed price in writing before scheduling delivery.