An Enviro EF2 pellet stove typically costs $500-$1,500 used, with price depending on condition, model type, and included parts. Because the EF2 is an older stove and new inventory may be limited, installation, venting, repairs, and local labor can make the total project cost substantially higher.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used EF2 stove | $500 | $1,000 | $1,500 | Working unit; condition and accessories vary |
| Inspection and basic service | $150 | $300 | $600 | More if parts or extensive cleaning are needed |
| Professional installation | $800 | $1,500 | $3,000 | Existing venting can reduce the bill |
| Typical purchase and install | $1,300 | $2,800 | $5,100 | Excludes major repairs and structural work |
What an Enviro EF2 stove costs to buy and install
A used EF2 commonly lists for $500-$1,500 before delivery or installation. A buyer should budget around $2,800 for a stove, inspection, and standard installation when the unit is in working condition and the home already has a suitable hearth location. A new EF2 may not be readily available; a comparable current pellet stove can cost roughly $2,000-$4,000 before installation.
Most complete EF2 projects fall around $1,300-$5,100, with venting and repairs causing the widest swings. Assumptions: U.S. pricing, ordinary access, a used freestanding unit, and no major chimney or electrical upgrades.
How stove, vent, labor, and parts shape the quote
Quotes should distinguish the stove purchase from professional work and replacement parts. Ask whether cleaning, startup testing, vent materials, delivery, and disposal are included. A low purchase price can be offset by a failed control board, worn auger, or vent system that does not meet current installation requirements.
| Cost item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Used EF2 | $500-$1,500 | Per stove | Condition, model, and included accessories |
| Labor | $400-$1,200 | Per installation | Access, vent route, and removal work |
| Pellet venting | $300-$1,000 | Per system | Pipe length, fittings, and wall or roof exit |
| Service or parts | $150-$800 | Per repair visit | Cleaning, diagnostics, and components needed |
| Hearth and electrical work | $100-$600 | Per job | Protection, outlet location, and code needs |
Pellet-stove installation labor often works out to about $75-$125 per hour, though many installers quote a fixed job price.
Venting and labor usually matter more than small accessory costs. Confirm whether the estimate includes a permit, inspection, and any required hearth protection rather than assuming they are part of the stove price.
EF2 insert and freestanding prices are not interchangeable
An EF2 freestanding stove generally needs a compatible vent route and adequate clearances. An insert must fit the fireplace opening and may require a liner, surround, and work inside the firebox. A used insert can still be inexpensive, but installation may add $1,200-$3,000 when a liner or substantial fit-up is required; a straightforward freestanding hookup may be closer to $800-$1,800.
Verify the exact EF2 configuration before comparing listings or installation bids. Confirm dimensions, whether the hopper and controls are present, and whether the seller includes the vent components. A stove listing price alone does not establish that the unit will fit or pass local inspection.
Which EF2 condition and vent specs raise the estimate?
Stove condition is a major price driver. A clean, tested unit with working ignition, fans, and feed system may justify a higher purchase price than an untested stove; a service visit and parts can add $150-$800 or more. Ask for a cold-start demonstration and an inspection of the burn pot, door seals, wiring, and exhaust path.
Venting changes the quote as well. A short, direct run of about 3-6 feet is generally less costly than a longer route with multiple elbows or a roof penetration. If the stove is more than 10-15 feet from a practical exterior exit, extra pipe and labor can materially increase the installation total. Local rules and the manufacturer’s specifications determine what is acceptable.
Untested operation and a complicated vent path are warning signs for a higher final bill. Get a written assessment of parts availability before buying an older unit that needs electronic or feed-system repairs.
How long EF2 installation takes and what labor covers
A simple replacement using sound, compatible venting may take about 4-8 labor hours. A first-time installation, liner, new exterior penetration, or hearth changes can extend the work to 1-2 days. The crew may need to remove an old appliance, assemble vent pipe, seal connections, connect power, and test operation.
Ask the installer to separate appliance setup from venting and removal charges. Removal and disposal can add $100-$400, while difficult access, masonry work, or an electrical outlet relocation may be priced separately. The estimate should identify who handles permits and final testing.
How regional labor changes EF2 installation pricing
Labor and permit costs vary by market. A rural area with fewer specialized installers may have travel or minimum-service charges, while major metro areas can run roughly 10%-25% above a national middle estimate. Cold-climate demand can also limit appointment availability during fall and winter, when pellet-stove service calls rise.
Compare local quotes for the same scope, not just the same stove model. Check whether each bid includes the same vent length, removal, inspection, and startup test; otherwise, a lower total may simply leave work out.
Three EF2 quote examples for different project scopes
A used freestanding EF2 with existing compatible venting might cost $900 for the stove, $250 for inspection, and $800 for installation, totaling about $1,950. A unit needing a new 6-foot vent run could be $1,100 for the stove, $650 for materials, $1,000 for labor, and $250 for setup, totaling $3,000.
An EF2 insert with a new liner and minor service could total about $4,300: $1,000 for the stove, $1,200 for liner materials, $1,500 for installation, and $600 for cleaning and parts. These examples assume no major masonry repairs or electrical upgrades.
How to lower the EF2 bill without skipping safety checks
Get two or three itemized bids and compare vent specifications, labor, permits, and startup testing. Buying in spring or summer may improve scheduling and reduce urgency, although used-stove prices depend on local supply. A local seller can also reduce freight expense, but the stove should be inspected before payment.
Keep a sound vent system if an installer confirms it is compatible and in safe condition. Avoid paying for cosmetic upgrades or replacing components that test properly, but do not bypass required clearances, seals, or inspections. Have a qualified technician confirm safe operation before relying on a used EF2 for heat.