An epoxy resin table typically costs $800-$6,000, with many custom dining tables priced around $2,500. Table size, hardwood species, resin volume, edge detail, and shop labor have the biggest effect on the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Small side or coffee table | $250 | $850 | $2,000 | About 18-36 inches wide |
| Dining table | $1,200 | $2,800 | $6,000 | About 6-8 feet long |
| Large custom or premium table | $3,500 | $6,500 | $12,000+ | Oversize slab, specialty design, or premium wood |
| Tabletop refinishing | $300 | $900 | $2,500 | Depends on damage and resin coating |
Assumptions: U.S. custom-shop pricing, standard domestic hardwood, finished tabletop, and ordinary delivery access. Prices can be higher in major metro areas or for sculptural bases and rare slabs.
What a Custom Epoxy Resin Table Costs by Size
Small accent tables generally run $250-$2,000; a 4- to 5-foot coffee or console table commonly costs $800-$2,500. A standard 6-foot dining table often falls between $1,800 and $4,500, while an 8-foot piece may reach $3,000-$7,000. Oversize conference tables and highly figured slabs can exceed $12,000.
These ranges generally cover a completed tabletop and base, sanding, and a protective finish. A simple tabletop-only build can cost less, while a metal base, custom shape, or premium finish adds expense. Size and slab quality usually explain the largest differences between otherwise similar quotes.
How Slab, Resin, and Shop Labor Shape the Quote
Custom pricing usually combines the wood slab, resin, fabrication, finish, and delivery. The table below gives typical component ranges; items may be bundled in a shop’s quote rather than listed separately.
| Quote component | Typical price | What changes it | Common unit basis |
|---|---|---|---|
| Hardwood slab | $200-$1,800 | Species, width, drying, grain, and defects | $10-$60+ per board foot |
| Epoxy resin and color | $100-$700 | Pour depth, river width, and pigment | $80-$180 per gallon |
| Fabrication labor | $500-$2,500 | Flattening, molding, pours, sanding, and assembly | $50-$100 per hour |
| Base and finish | $150-$1,000 | Steel or wood base and coating type | $100-$700 per base |
| Delivery and setup | $75-$500 | Distance, stairs, and table weight | $1-$4 per mile or flat fee |
Labor is often the largest controllable portion after the slab, but complex pours require more than basic assembly time.
How Table Length and River-Pour Depth Raise Resin Use
Resin volume depends on the open channel’s length, width, and depth, not simply on the table’s outside dimensions. A 6-foot river table with a 3-inch-wide channel and a 1.5-inch pour depth uses roughly 1.4 gallons before waste; a wider 6-inch channel at the same depth uses about 2.8 gallons. Actual requirements vary with slab shape and mold design.
Slabs wider than 30 inches or longer than 8 feet can require more expensive lumber and extra handling. Deep pours above about 2 inches may call for specialized casting resin, staged pours, and temperature control. Live edges, knots, and cracks can also take additional resin. Ask for the planned resin volume and pour depth, not just a general resin allowance.
Which Epoxy Table Choices Can Lower the Quote?
A narrower channel, standard dimensions, and a domestic species such as maple or walnut can reduce material cost without changing the table’s basic function. Choosing a straightforward rectangular top and a standard steel base also limits fabrication hours. Buyers can ask whether the shop has suitable kiln-dried slabs in stock instead of sourcing a rare or unusually wide piece.
Compare quotes with the same finished dimensions, wood species, resin type, base, finish, and delivery terms. A lower quote may exclude the base, final polishing, or in-home placement. If only the finish is damaged, refinishing may cost $300-$1,200 rather than replacing the full table. Keep the design and quote scope comparable before deciding that one bid is cheaper.
Why Epoxy Table Quotes Vary Between U.S. Regions
Labor and shop overhead can shift prices even when materials are similar. Custom-shop rates in large coastal metros may be 15%-30% above those in lower-cost inland markets; rural shops can charge less for labor but more for delivery or slab sourcing. Local availability of hardwood and resin can also affect the estimate.
For example, a standard 6-foot table quoted at $2,500 in a moderate-cost market might be $2,900-$3,250 in a high-cost metro, before unusual delivery or installation charges. These are planning comparisons, not fixed regional price schedules. Request a local quote that separates fabrication from delivery and taxes.
How Many Shop Hours Go Into a River Table
A basic coffee table may take 12-25 shop hours, while a 6-foot dining table often needs 25-50 hours spread over several workdays. The elapsed time is longer because resin must cure between stages; a custom build may take two to six weeks from slab selection to delivery, depending on the shop’s queue and finish schedule.
At $50-$100 per hour, 25-50 labor hours represent $1,250-$5,000 of theoretical labor value, though many shops quote a bundled project price. Ask whether the estimate includes slab preparation, mold construction, flattening, sanding, finish coats, and base attachment. Clarifying included labor helps explain why two similar-looking tables have different quotes.
Walnut, Maple, and Ready-Made Tables Compared
Walnut live-edge tables commonly cost $2,000-$6,000 for dining sizes because attractive slabs can be costly. Maple versions may run $1,500-$4,500, depending on figure and width. A simpler pine or other lower-cost wood design can start around $800-$2,500, although softer wood may show dents sooner.
Factory-made dining tables without a poured resin feature often cost $500-$2,500, while a custom solid-wood table without epoxy may be $1,200-$5,000. These alternatives can preserve the live-edge or natural-wood look while avoiding resin and pour labor. Compare the full design and durability requirements, not only the initial purchase price.