Everlast composite siding cost varies by home size, profile, and labor, but buyers typically pay for materials, removal of old siding, and skilled installation. The price ranges reflect panel type, color, and regional labor markets. This guide presents practical figures in USD, with low, average, and high estimates to help plan a budget for a full exterior update.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (Everlast siding panels) | $6,000 | $10,500 | $18,000 | Based on 1,500 sq ft, standard profile, factory finish |
| Labor for removal and installation | $4,000 | $8,000 | $14,000 | Midwest-to-sunbelt ranges; crew of 2-3 workers |
| Disposal and debris handling | $500 | $1,200 | $2,000 | Old siding, disposal fees, dumpster |
| Permits and inspections | $100 | $600 | $1,200 | Region-dependent |
| Optional underlayment or insulation upgrade | $1,000 | $2,500 | $5,000 | If upgrading R-value |
| Warranty and contingencies | $300 | $900 | $1,800 | Manufacturer warranty plus contractor reserve |
Materials Cost For Everlast Siding
Materials account for the largest portion of the project price, driven by panel length, profile style, and color selection. For 1,500 square feet of exterior siding, Everlast panels typically range from $4 to $12 per sq ft, depending on finish and trim accessories. In practice, expect about $6,000 to $12,000 for standard panels and colors. Premium finishes or specialty profiles can push material costs higher, up to $15 per sq ft in rare cases.
Labor Hours And Rates For Installation
labor costs reflect regional wage levels and the complexity of the job. Typical installation uses 2-3 skilled workers over 2-5 days for 1,500 sq ft, with hourly rates ranging from $40 to $75 per hour per worker. A compact, single-story home may fall on the lower end, while multi-story homes with intricate trim push prices toward the high end. Assumptions: standard access, no major structural repairs, mid-range labor market.
Regional Price Variations By U.S. Region
Regional differences can swing the overall price by roughly 10% to 25%. The West Coast and Northeast often see higher labor rates, while the Midwest and Southeast tend toward mid-range costs. Climate-driven moisture prep and long panel runs in open lots can affect crew time and disposal fees. Assumptions: typical urban or suburb locations, standard access.
Size And Scope: Home Exterior For 1,500 Sq Ft
Project scope matters for estimating total cost. For a 1,500 sq ft home with two coat colors and basic trim, material costs commonly fall in the low-to-average range, while extra corner posts, shake or clapboard profiles, or extensive fascia work push totals higher. A complete wrap-around install with soffit vents adds to labor and materials.
System Type And Finish: Profile And Trim Choices
Everlast offers multiple profiles (flat, grooved, or textured). Profile selection directly influences price per sq ft and trim kit costs. For example, a standard sawtooth or vertical groove profile may cost roughly $6-$9 per sq ft in materials, whereas deeper textures or extra detailing can reach $12-$15 per sq ft. Include corner posts and trim to complete the look.
Additional Fees: Removal, Disposal, City Permits
Removing existing siding and hauling debris adds a measurable fee, typically $500 to $2,000 depending on old material and lot access. Permits and inspections, when required, commonly range from $100 to $1,200. Scheduling constraints or expedited timelines may also trigger processing charges.
Maintenance And Longevity Impact On 5-Year Cost
Everlast siding is designed for long service life with low maintenance. Expect minimal annual upkeep beyond washing and inspection. Five-year ownership costs are influenced by repainting intervals and potential repairs, but the durable composite surface reduces frequent resealing or staining compared with wood.
Replacement Vs Repair: When To Choose Everlast
For weathered siding, a full replacement using Everlast often proves cost-effective compared with piecemeal repairs, especially when labor rates are low or if the existing substrate requires upgrade. In scenarios of localized damage or limited budget, partial replacement combined with repair can reduce upfront costs but may push maintenance costs later.
Future Cost Drivers: Permits, Insulation, And Color Trends
Expect price shifts if building codes require enhanced underlayment or insulation. Color trends affect material costs through finish options. Additionally, any regional code changes or rebates can alter the overall pricing landscape and the long-term value of the siding.
Three Real-World Quote Scenarios For 1,500 Sq Ft
- Basic profile, standard install — Materials $6,000, Labor $6,000, Disposal $900, Permits $300; Total $13,200
- Premium profile, full trim package — Materials $12,000, Labor $9,000, Disposal $1,200, Permits $600; Total $22,800
- Budget retrofit with minor repairs — Materials $7,000, Labor $4,500, Disposal $800, Permits $150; Total $12,450
Note: The labor component uses typical crew sizes and days, with regional rate variation reflected in the totals.
Table: Example Cost Breakdown By Job Scope
| Scope | Materials | Labor | Disposal | Permits | Total |
|---|---|---|---|---|---|
| Standard install, 1,500 sq ft | $6,500 | $6,500 | $900 | $300 | $13,200 |
| Premium profile with trim | $12,000 | $8,500 | $1,000 | $600 | $22,100 |
| Budget retrofit with minor repairs | $7,000 | $4,500 | $800 | $150 | $12,450 |