Ezy Jamb doors cost about $1,200-$2,500 per standard interior opening when the concealed frame, door slab, finish work, and professional installation are included. The frame kit alone is often $350-$800, while door size, wall construction, hardware, local labor, and finish quality drive the installed price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Ezy Jamb frame kit | $350 | $550 | $800 | One standard interior opening; model and supplier affect price |
| Door slab | $150 | $400 | $1,000 | Hollow-core to solid-core or specialty slab |
| Installed opening | $1,200 | $1,800 | $2,500+ | Frame, slab, hardware, labor, and typical finish work |
| Installation labor | $500 | $850 | $1,400 | More for remodeling, out-of-square walls, or complex finishes |
What a finished Ezy Jamb doorway typically costs
A completed Ezy Jamb doorway commonly lands between $1,200 and $2,500, with a practical planning figure near $1,800 for one standard, newly framed interior opening. This estimate assumes a single door, normal access, a compatible wall, a midrange slab, standard hinges and latch, and paint-ready trimless finishing. A premium slab, specialty hardware, or substantial wall repair can push the quote above $2,500.
The system uses a concealed frame designed to create a clean, trimless opening. The frame is only one part of the project: the door slab, accurate framing, hanging, drywall or plaster finishing, and painting all affect the final price. For a typical one-door project, budget roughly $350-$800 for the frame kit and $1,200-$2,500 for a finished, professionally installed opening.
Frame-only pricing is not the same as a complete door price. A kit may not include a slab, handle, latch, closer, freight, taxes, or installation. Confirm the exact model and included hardware with the seller, especially when ordering for a specific wall thickness or door swing.
Assumptions: One standard interior opening, U.S. dollars, ordinary access, and midrange materials; regional quotes vary.
How the frame, slab, and finish work divide the quote
A useful estimate separates the concealed frame from the door and the trades needed to make the opening look finished. Labor can be a large share because the frame must be set accurately and the surrounding wall needs careful finishing. A low frame-kit price does not necessarily mean a low installed price.
| Quote item | Low | Average | High | What changes the charge |
|---|---|---|---|---|
| Frame kit | $350 | $550 | $800 | Model, dimensions, supplier, and freight |
| Door slab | $150 | $400 | $1,000 | Core, finish, size, and custom construction |
| Hardware | $50 | $150 | $400 | Hinges, privacy latch, pull, or specialty set |
| Carpentry labor | $350 | $650 | $1,000 | New construction versus retrofit and alignment |
| Drywall, plaster, and paint | $200 | $450 | $900 | Wall damage, finish level, and paint scope |
| Delivery and disposal | $0 | $75 | $250 | Freight distance, packaging, and old-door removal |
These are planning ranges, not fixed national rates. Some contractors combine materials and labor into a single installed price, while others list framing, drywall, and painting as separate trades. Ask whether the quote includes the slab, hardware, freight, wall finish, and paint before comparing totals.
For labor estimates, a carpenter or door installer may charge around $75-$125 per hour, with finish trades billed separately or included in a project rate. A basic installation may require about 6-10 hours of carpentry, plus finishing time.
Which door size, wall material, and finish raise the price
Door dimensions and wall conditions have a direct effect on fit, installation time, and material cost. A standard interior slab around 30-36 inches wide and 80 inches tall is generally less costly than an oversized or custom-height door. Wider, taller, or heavier slabs may require a compatible frame, reinforced framing, and additional handling.
Wall thickness matters because the frame must suit the finished wall assembly. A standard drywall partition is usually simpler than a thick masonry wall or a wall with unusual layers. If the opening is not plumb, square, or structurally sound, the installer may need to adjust framing before setting the frame. Changes to the opening or wall can add hundreds of dollars beyond the price of the door system itself.
- Door size: A custom slab above 36 inches wide or 80 inches tall can add roughly $150-$600 or more, depending on construction and availability.
- Solid-core slab: Often adds $150-$500 compared with an economical hollow-core door, with more cost for specialty finishes.
- Wall preparation: Correcting an opening that is out of square by more than about 1/4 inch may add $150-$500 in carpentry, depending on the cause.
- Finish requirements: Smooth, paint-ready edges may fit a basic scope; high-level drywall finishing, plaster matching, or wallpaper repair can add $200-$700.
- Door swing and hardware: A pocket-style configuration, concealed closer, or unusual hinge arrangement may require a different system or extra labor.
Moving or enlarging an opening is a separate scope from replacing a conventional frame. If the wall is load-bearing, structural review and any required permits can add cost; the amount depends on local rules and the work involved. Get the installer to identify these items before work begins rather than treating them as routine frame installation.
How installation hours change between new builds and remodels
In new construction, the frame can be installed while the wall is being built, which makes access and alignment easier. A straightforward opening may take a carpenter roughly 4-7 hours to frame and set, followed by drywall finishing and painting. A remodel may take 6-12 hours of carpentry because an existing frame, casing, drywall, or flooring may need removal or repair.
Finish work may require a separate visit after compound dries. A contractor may schedule the frame and door first, then return for sanding, paint, or adjustment. This can extend the calendar time to several days even when hands-on labor is limited. For a retrofit, compare the full crew-and-finish schedule, not just the quoted hours to hang the door.
Labor pricing varies with access, crew size, and local trade rates. A single installer may handle a light slab, while a heavy solid-core or oversized door is safer and quicker with two people. Rates around $75-$125 per hour for skilled installation labor are common budgeting assumptions, but metro-area rates can be higher and rural trip charges may apply.
Assumptions: One opening, no structural changes, and ordinary interior finish work; extra mobilization or return visits may be billed separately.
How Ezy Jamb compares with standard trim and pocket doors
A conventional prehung door with visible casing is usually the lower-cost option when appearance is the main consideration. A basic installed prehung interior door may cost about $500-$1,300, depending on the slab, trim, and replacement work. Ezy Jamb typically costs more because it requires precise installation and a clean, trimless finish.
A pocket door can save swing space, but it needs a cavity in the wall and may require rerouting wiring or plumbing. A basic pocket-door project can range from $1,000-$2,800, while complicated retrofits can exceed that range. It is not a direct substitute if the goal is specifically a hinged door with a concealed frame.
| Option | Typical installed price | Price advantage | Important trade-off |
|---|---|---|---|
| Standard prehung door | $500-$1,300 | Often lowest total cost | Visible casing and conventional appearance |
| Ezy Jamb hinged door | $1,200-$2,500 | Trimless, concealed-frame look | More exacting installation and wall finishing |
| Pocket door | $1,000-$2,800 | No swing clearance needed | Wall cavity and possible utility conflicts |
Repairing an existing door may be cheaper still. Adjusting hinges, replacing a latch, or correcting minor rubbing often costs $100-$400, while replacing a damaged slab may cost $250-$900 installed. If the existing frame is sound and the trimless look is not essential, repair or a standard replacement may avoid the Ezy Jamb premium.
Three sample Ezy Jamb quotes for different project scopes
These examples show how a similar frame can produce different totals based on slab choice, wall condition, and finish scope. They represent plausible U.S. contractor pricing rather than guaranteed package rates. Estimates assume one interior doorway and exclude major structural changes.
| Project | Specifications | Labor assumption | Estimated total |
|---|---|---|---|
| New-build basic | 30-inch opening, frame $450, hollow-core slab $200, hardware $75 | 6 hours at $85/hour plus $250 finish work | $1,485 |
| Typical remodel | 32-inch opening, frame $575, solid-core slab $450, hardware $125 | 9 hours at $95/hour plus $450 drywall and paint | $2,455 |
| Custom-height opening | 36-inch opening, frame and special-order components $750, slab $850, hardware $250 | 12 hours at $115/hour plus $700 finish work | $3,930 |
The new-build example assumes the wall is open and ready, with no demolition. The remodel example includes typical removal and patching, but not rewiring or structural work. The custom project reflects a nonstandard slab and additional finishing, which can raise the total sharply.
Use the line items to identify scope differences before deciding that one contractor is cheaper. A quote that excludes painting or disposal may look lower but leave those expenses to the homeowner. Check whether measurements, delivery, hardware, and final door adjustment are included.
Why Ezy Jamb quotes differ across U.S. markets
Installed prices can vary by 15%-30% between lower-cost markets and expensive metropolitan areas, chiefly because of labor rates, contractor availability, and freight. In a smaller market, a straightforward project may fall near $1,200-$1,700. In a high-cost metro, the same scope may reach $1,700-$2,500 before premium materials or difficult wall repairs.
Availability can also matter. If a particular frame or slab must be special-ordered, shipping and lead time may affect the quote. Suppliers may price freight separately, especially for long or heavy components. A local contractor familiar with the system may complete the work more efficiently than a crew encountering the frame for the first time.
Compare local quotes using the same frame model, slab size, hardware, and finish scope. Obtain at least two itemized estimates where possible, and ask whether the price includes delivery and any travel or minimum-service charge. Local sales tax and permit requirements, when applicable, should be shown separately or clearly noted.
Do not apply a single national percentage to every estimate. A low labor market may still have higher delivery costs or limited installer availability, while a metro quote can include more complete finishing. The most useful comparison is the total price for the same opening and completion standard.
Ways to lower the installed price without losing the trimless look
Keeping the opening standard-sized is one of the strongest ways to control cost. A readily available slab and frame configuration avoids custom-order pricing and reduces the chance of extra framing work. Confirm dimensions before ordering; a mismatch can lead to return freight, restocking charges, or field modifications.
- Choose a standard slab: A paint-grade hollow-core or common solid-core door can cost far less than a custom veneer or specialty finish.
- Prepare the room: Clear furniture and access paths, and confirm the work area is available. Ask the installer before removing an old door or frame, since premature demolition can complicate measurements.
- Bundle nearby work: If several trimless openings are planned, request one coordinated quote. Shared setup and delivery may reduce per-door labor, though each opening still needs individual alignment.
- Keep the scope defined: Decide whether the contractor or another trade will paint and repair surrounding walls. Avoid paying twice for overlapping finish work.
- Skip unnecessary upgrades: Compare standard hinges and latches with premium concealed hardware before adding options that do not affect the desired appearance.
Ask each bidder to state the frame model, slab allowance, labor scope, finish standard, exclusions, and warranty. A detailed estimate helps distinguish a genuinely lower price from one that omits important work. Price the complete doorway, then choose the least costly specification that meets the opening and finish requirements.
DIY installation may reduce labor charges, but accurate framing and wall finishing are important to the system’s appearance and operation. A small alignment error can create uneven reveals or a door that does not close cleanly. Homeowners with carpentry and drywall experience may save money, but should verify manufacturer instructions, required tools, and supplier terms before purchasing.