Faux stone siding cost varies by material type, project size, and labor. Homeowners typically pay per square foot installed, with price brackets influenced by panel quality, removal of existing siding, and regional labor rates. This article breaks down the cost drivers and provides practical price ranges for budgeting.
Assumptions: Midwest labor rates, standard polymer or concrete veneer panels, normal access, and typical 8–12 hour workdays for a small crew.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed faux stone siding (per sq ft) | $5 | $9 | $18 | Includes materials and basic labor |
| Full exterior on 1,500 sq ft home | $12,000 | $16,500 | $30,000 | Depending on panel type and removing old siding |
| Partial facade upgrade (linear ft) | $40 | $70 | $120 | Per linear foot where weatherboard or corner details apply |
| Removal of existing siding (per sq ft) | $2 | $4 | $8 | Assumes vinyl or wood removal |
| Delivery and waste disposal | $0 | $1,000 | $3,000 | Depends on distance and debris volume |
Faux Stone Siding Price Per Square Foot By Material Type
Material choice drives the price range. Manufactured stone veneer (MSV) and fiber-reinforced polymers offer similar aesthetics but differ in durability and install labor. Most homeowners see $6-$12 per sq ft installed for standard MSV, with premium finishes climbing to $14-$25 per sq ft. The lower end reflects basic panels and straightforward installation, while the high end includes heavier textures, richer profiles, and tighter material tolerances.
Assumptions: standard thickness panels, typical 8–12 inch profile, normal yard accessibility.
Installed Cost For a Typical 1,500–1,800 Sq Ft Home
For a mid-sized house, total installed cost generally falls in the $16,500-$28,000 range, with some projects exceeding $30,000 when old siding must be removed and replaced, or when premium weatherproofing and seals are installed. Expect the average project to land around $20,000-$22,000.
Assumptions: single-story or ranch with standard eaves, no major structural work, and moderate access.
Cost Breakdown: Major Quote Components
The quote typically separates materials, labor, and ancillary costs. Below is a concise view.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $5-$9 per sq ft | $9 per sq ft | $12-$18 per sq ft | Panels, lattice, sealant, trims |
| Labor | $2-$4 per sq ft | $4-$7 per sq ft | $7-$12 per sq ft | Install, cutting, fastening |
| Delivery/Disposal | $0-$800 | $1,000 | $2,500 | Distance and debris volume |
| Removal of old siding | $1-$3 per sq ft | $2-$4 per sq ft | $5-$8 per sq ft | Adjacent doors/windows considerations |
| Permits/Inspections | $0-$200 | $300 | $600 | Local rules and plan checks |
Key Variables That Change the Final Faux Stone Siding Price
Two strong drivers are project size and panel weight. Square footage drives total cost linearly, while heavier stone profiles increase labor time by 15-25% on average. Additional drivers include old siding removal needs (adds $2-$8 per sq ft) and roof line complexity which can add trim work and fasteners.
Assumptions: mid-range crews in suburban markets, standard access.
Regional Price Variations Across the United States
Coastal and southern markets tend to push prices higher due to material costs and labor competition. Midwest rates often sit near the lower end, with West Coast projects at a premium. Region-wide deltas can reach ±20% from the national average. Consider scheduling in shoulder seasons to avoid surge pricing in busy months.
Assumptions: 1,600–1,800 sq ft homes, typical climate, standard permits.
Project Scope Impacts: Partial Facade vs Full Exterior
Partial facades remove less siding and may keep some exterior work minimal, reducing labor hours. Full exteriors enhance curb appeal but require more materials and longer crews. Partial jobs can be 30-40% cheaper per sq ft in some cases, but totals depend on access and trim complexity.
Assumptions: single-story home, standard window openings, no masonry ties required.
Premium Accessories And Fasteners Cost
Upgrading to corrosion-resistant fasteners, extra sealants, or decorative quoins adds to the bill. Accessory packages can add $2-$5 per sq ft on average. Premium flashing and moisture barriers may push costs higher in areas with heavy rainfall.
Assumptions: standard climate with occasional heavy moisture.
Ways To Cut Faux Stone Siding Costs Without Sacrificing Look
To reduce costs, limit scope, opt for mid-range panels, and reuse existing trim where feasible. Scheduling midweek work and obtaining multiple quotes helps compare pricing. Bundling diagnosis, delivery, and installation with a single contractor often yields a 5-12% discount.
Assumptions: non-urgent replacement, reasonable weather window.
Three Real-World Quote Scenarios
- Scenario A: 1,600 sq ft ranch, mid-range MSV, standard trim, no removal. Total $14,000-$20,000.
- Scenario B: 1,800 sq ft two-story, premium texture, old siding removal, extra sealing. Total $22,000-$32,000.
- Scenario C: 1,200 sq ft single-story, basic panels, close proximately located contractor, minimal disposal. Total $9,000-$14,000.
Next Steps For Budgeting Faux Stone Siding
Obtain three written estimates that break out materials, labor, and disposal. Ask for a detailed scope of work and a per-square-foot breakdown to compare apples-to-apples. Verify warranty terms on panels and labor, and confirm removal and disposal responsibilities before signing.
Estimated Summary Table
Assumptions: Midwest rates, standard material mix, normal access.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Per sq ft installed (MSV) | $5 | $9 | $18 | Materials + labor |
| Full exterior (1,500 sq ft) | $12,000 | $16,500 | $30,000 | Includes removal of some old siding |
| Partial facade (linear ft) | $40 | $70 | $120 | Trim-heavy sections |
| Removal of old siding (per sq ft) | $2 | $4 | $8 | Vinyl/wood common |