Fiber door prices in Pakistan typically range from about $29 to $125 per door, based on an assumed exchange rate of PKR 280 per U.S. dollar. Installed prices are often $43-$161, with size, molded design, frame, hardware, city, and fitting work driving the quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door slab | $29 | $64 | $125 | Approx. PKR 8,000-35,000 |
| Frame and hardware | $7 | $18 | $39 | Depends on material and lock set |
| Installation | $7 | $18 | $36 | Existing opening in usable condition |
| Installed total | $43 | $100 | $200 | Approx. PKR 12,000-56,000 |
What a standard Pakistan fiber door costs
A basic, locally made fiber-reinforced plastic (FRP) door slab measuring about 3 by 7 feet usually costs PKR 8,000-$17,000, or roughly $29-$61. A midrange molded door with a better surface finish commonly runs PKR 18,000-$25,000, around $64-$89. Premium patterns, thicker construction, or custom sizing can reach PKR 35,000, about $125, before fitting.
For a typical bathroom or interior doorway, frame, hinges, lock, and installation can bring the total to PKR 12,000-$35,000, or approximately $43-$125. A custom opening, upgraded frame, or higher-end lock can push the bill above that range. Assumptions: Pakistan-made product, standard single-door opening, ordinary access, and conversion at PKR 280 per U.S. dollar.
For a standard opening, budget about $64 for the door slab and around $100 for a midrange installed setup. Local shop quotes are normally issued in PKR; the dollar figures here are approximate conversions, not U.S. retail prices.
How the slab, frame, hardware, and fitting shape the quote
Ask for itemized pricing because a low slab quote may exclude the frame, lock, transport, or removal of the old door. The following estimates describe common components for a standard installation; actual local rates vary by city and supplier.
| Quote component | Low | Average | High |
|---|---|---|---|
| FRP door slab | $29 | $64 | $125 |
| Frame | $7 | $14 | $29 |
| Hinges, handle, and lock | $4 | $11 | $25 |
| Labor to fit door | $7 | $18 | $36 |
| Delivery or old-door removal | $2 | $7 | $18 |
The slab and frame usually account for most of the material bill, while site adjustments make labor less predictable. Labor is often estimated by job rather than hourly, but a useful comparison allowance is $2-$5 per hour for a local carpenter or fitter, converted from roughly PKR 500-1,400.
Does a 3-by-7-foot opening need a custom-size door?
Standard dimensions generally cost less than a door made to fit an unusual opening. A custom width or height can add roughly 10%-30% to the slab price, especially when the design or color is not stocked. Measure the clear opening and frame, not just the old slab, before requesting a quote.
Thickness and intended use matter as well. A lightweight bathroom door may suit a dry interior, while an exposed entrance needs a product and frame rated for the site conditions. A textured finish, molded panels, or a nonstandard color can add $7-$25 compared with a plain stocked style. Confirm the exact size, thickness, and use before comparing two door prices.
Why Karachi, Lahore, and smaller-city quotes differ
Prices can vary with freight, stock, labor availability, and the seller’s product range. In major cities such as Karachi, Lahore, and Islamabad, competition may keep common stocked models near the lower or middle end, though premium finishes can cost more. Delivery to a smaller town or remote area may add about 5%-15% to the door-and-frame order.
These are directional differences, not guaranteed city tariffs. Ask whether the quote includes delivery to the property and whether fitting is priced separately. Compare complete delivered-and-installed totals rather than showroom slab prices.
What installation labor adds to a fiber door project
Replacing a door in a sound frame can take about 2-4 hours and may cost PKR 2,000-$6,000, approximately $7-$21. A new frame, uneven masonry, or trimming and alignment can extend the work to 4-8 hours and raise labor to about PKR 6,000-$10,000, or $21-$36. Rates depend on the city and whether a fitter must make a second visit.
Old-door removal and disposal may add PKR 500-$2,000 ($2-$7); masonry repair is usually quoted separately. Have the installer inspect the opening before accepting a labor-only estimate.
Fiber doors versus PVC and wood at similar sizes
A basic PVC door may be a lower-cost alternative, often around $21-$71 for the slab, while a fiber door commonly falls around $29-$125. A solid or better-finished wooden door can exceed $89-$250 before installation, depending on wood and construction. These broad comparisons assume a similar interior-door size; finish, core, and frame specifications can change them substantially.
For a humid bathroom, compare water resistance and edge construction rather than choosing by price alone. Fiber doors are not automatically suitable for direct sun, heavy impact, or every exterior exposure. Check the manufacturer’s intended-use guidance before paying extra for a door that does not match the location.
How to trim the installed price without cutting fit
Choose a stocked 3-by-7-foot model, a standard color, and hardware that meets the actual security need. Reusing a sound frame can avoid replacement labor, but only if it is square, firm, and compatible with the slab. Provide accurate measurements and photos so the shop can identify likely adjustments before delivery.
Get at least three itemized quotes covering slab, frame, hinges, lock, delivery, removal, and fitting. Compare the same size and finish, and ask whether taxes or a return visit are included. A clear scope prevents a low initial quote from growing through omitted parts or site charges.