Fireplace Xtrordinair prices depend on whether the project uses a gas fireplace, wood-burning model, or insert, plus installation requirements and finish choices. Buyers commonly budget $4,000-$12,000 for the appliance and $7,000-$20,000 or more installed; custom surrounds, venting, and structural work can push totals higher.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Fireplace unit | $4,000 | $7,500 | $12,000+ | Model, size, and options affect price |
| Installed gas fireplace | $7,000 | $12,000 | $20,000+ | Assumes typical venting and finish work |
| Installed wood fireplace | $8,000 | $14,000 | $25,000+ | Chimney and framing can raise the total |
| Fireplace insert | $5,000 | $8,500 | $15,000+ | Includes a basic installation allowance |
What Fireplace Xtrordinair models cost to buy and install
Fireplace Xtrordinair, often called FPX, does not have one universal retail price list. Dealers quote by model, configuration, and local labor. A standard direct-vent gas fireplace may cost about $4,000-$9,000 for the unit, while larger or more feature-rich models can exceed $12,000. Wood-burning fireplaces and inserts vary with firebox size and venting needs.
Installed totals commonly run $7,000-$20,000 for a new gas fireplace and $8,000-$25,000 for a wood-burning installation. An insert installed into a suitable existing fireplace may land around $5,000-$15,000. Assumptions: U.S. mid-market pricing, standard finishes, accessible work area, and no major structural repairs. The appliance is only part of the budget; venting, labor, and finish work often add several thousand dollars.
How venting, labor, and finishing shape the quote
Ask the dealer to separate equipment from installation so quotes can be compared on equal terms. These planning ranges cover common line items; actual scope depends on whether the home already has a compliant chimney or gas line.
| Quote item | Typical price | What changes the charge |
|---|---|---|
| Fireplace unit | $4,000-$12,000+ | Model, size, fuel, and options |
| Venting or chimney materials | $800-$4,000 | Run length, roof access, and system type |
| Installation labor | $1,500-$5,000 | Removal, framing, hookups, and crew time |
| Surround and finish | $1,000-$6,000+ | Tile, stone, mantel, and custom carpentry |
| Removal and disposal | $300-$1,500 | Old unit, masonry, and haul-away needs |
Licensed fireplace or HVAC labor may run about $75-$150 per hour, though contractors often quote the installation as a fixed project price. Confirm whether the quote includes venting, gas or electrical connections, permits, and finish materials.
Gas, wood, and insert prices are not interchangeable
Gas models usually need a gas supply, approved venting, and electrical power for controls or fans. Connecting a nearby gas line may cost $500-$2,000; a longer route or panel work can raise that amount. Wood-burning models may require a listed chimney system, hearth protection, and more involved framing, making new installations pricier than a straightforward gas replacement.
An insert can cost less when an existing masonry fireplace and chimney are usable, but inspection or relining may add $500-$3,000. Replacing an old insert with a compatible unit is usually simpler than converting an open fireplace to a new system. Compare installed totals for the same fuel type and project scope, not just appliance prices.
Firebox size and vent length can change the final price
Fireplace size affects the unit price, framing opening, heat output, and finish area. A compact unit intended for a smaller room may fit a lower budget, while a fireplace with a viewing area around 40 inches or larger can cost more and require a wider surround. Check the manufacturer’s installation specifications rather than assuming a larger unit can use an existing opening.
Venting is another major variable. A short, straightforward vent route may stay near the lower end of the range; a route longer than about 15-20 feet, multiple offsets, or a roof penetration can add material and labor. Difficult access, nonstandard framing, and code corrections also raise bids. Measure the opening and document the vent route before requesting comparable estimates.
How long FPX installation takes and what labor covers
A replacement using an existing, serviceable vent and opening may take one working day, while a new installation commonly takes two to five days across framing, venting, hookups, and finish work. Custom stonework or chimney construction can extend the schedule. Labor allowances of $1,500-$5,000 are common for routine projects; extensive masonry or structural changes may push labor above $6,000.
Ask whether the installer handles inspection, startup, and homeowner instructions, and whether another trade is needed for gas or electrical work. A low labor quote may exclude demolition or finish repair. Compare the written task list and warranty terms, not only the hourly rate or project total.
Three installed quote examples for common FPX projects
| Example scope | Unit and materials | Labor and related work | Estimated total |
|---|---|---|---|
| Gas replacement | $5,500-$7,500 unit and vent parts | 12-18 hours; $1,500-$2,500 | $7,000-$11,000 |
| New gas installation | $6,500-$9,000 unit; $1,500-$3,000 venting | 24-40 hours; $3,000-$5,000 | $11,000-$18,000 |
| Wood fireplace with new chimney | $7,000-$12,000 unit and chimney materials | 40-65 hours; $5,000-$9,000 | $15,000-$25,000+ |
These examples exclude unusual structural repairs and premium stone finishes. Assumptions: typical suburban access, standard materials, and no major code corrections. Use the examples as quote-comparison benchmarks, not guaranteed dealer prices.
Regional labor and permit costs vary across the U.S.
Labor and permitting can shift the same project by roughly 10%-25% between markets. Major metro areas and regions with higher trade wages may run 15%-25% above a national mid-market estimate; rural areas can be 5%-15% lower, although travel charges or limited installer availability may offset savings. Local permit fees often fall around $100-$800, with inspections or additional mechanical permits billed separately.
Permit requirements vary by city, fuel type, venting, and whether framing or electrical work changes. Ask the installer to identify permit responsibility in writing and verify local requirements before work begins. Regional comparisons are most useful when they separate labor, permits, and materials instead of applying one flat discount.
Where to trim an FPX budget without weakening the installation
Keep the existing fireplace opening and vent system when an inspection confirms they are compatible and safe. Choose a standard surround or mantel, avoid unnecessary custom masonry, and compare the cost of a basic control package with optional upgrades. Scheduling outside peak heating-season demand may improve contractor availability, though local pricing is not guaranteed to fall.
Get at least three itemized quotes for the same model or equivalent specifications. Include demolition, gas-line work, electrical connections, permit fees, disposal, startup, and finish repair in each comparison. Do not cut costs by skipping required venting, clearances, or inspections. The best savings usually come from controlling finish scope and avoiding duplicate work, not omitting safety-related installation tasks.