Buyers typically pay for a Frigidaire dishwasher drain pump based on parts, labor, and quick-dispatch fees. The cost driver profile includes pump model, unit age, access to the dishwasher, and whether electrical testing or new hoses is required. This article lays out practical price ranges in USD and shows how a repair or replacement unfolds financially.
Assumptions: Midwest or U.S. regional labor rates, standard replacement pump, standard installation access, and typical 1-2 hour labor for a simple swap.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Frigidaire drain pump part | $25 | $60 | $120 | List price varies by model |
| Labor for replacement | $60 | $120 | $240 | Typically 1-2 hours |
| Service call / diagnostic fee | $40 | $75 | $120 | Waived with repair |
| Additional hoses/connectors | $5 | $15 | $40 | Depends on kit |
| Electrical testing | $0 | $20 | $50 | Included if needed |
Typical Frigidaire Dishwasher Drain Pump Replacement Cost
For a straightforward replacement on a common Frigidaire model, customers often see totals in the range of $90-$250, with the average near $150. The part itself commonly runs $25-$120, and labor typically accounts for $60-$120, depending on access and regional rates. Assumptions: standard 120V pump, accessible under the sink, no unusual wiring or cabinet modifications.
In some cases, a full dishwasher service call is required if the technician must remove the appliance from a tight space, elevating the total toward the high end.
Cost Components for a Drain Pump Job
The quote usually breaks into four to six elements. A typical breakdown uses a compact table to show major cost drivers and related ranges.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Drain pump hardware | $25 | $60 | $120 | Model-specific |
| Labor | $60 | $120 | $240 | 1-2 hours common |
| Service call | $40 | $75 | $120 | Diagnose and confirm |
| Hoses and clamps | $5 | $15 | $40 | Optional upgrade kit |
| Electrical testing | $0 | $20 | $50 | Check wiring safety |
| Tax and disposal | $0 | $5 | $20 | Depends on locale |
Variables That Most Impact Frigidaire Drain Pump Pricing
Two major drivers consistently shift the final price: unit accessibility and the pump type. If the dishwasher is recessed behind tight panels, expect higher labor and possible removal fees. If the model uses a high-end pump with integrated sensors, the part price increases and service complexity rises. Beyond accessibility, regional labor rates and urgency of service can swing totals by 10-30%.
Assumptions: standard single-stage pump, no cabinet reinforcement, urban or suburban service area.
How Unit Size and Model Type Change the Quote
Smaller compact units may use lower-cost pumps, while larger capacity or older units might require OEM-specific parts. Typical price effects include pump price $25-$90 for common models vs $90-$120 for premium OEM variants and labor adjustments of roughly 1-2 hours to 2-4 hours in restricted spaces.
Assumptions: mainstream Frigidaire built-in or portable models, standard under-sink access.
Ways to Cut Frigidaire Drain Pump Costs Without Sacrificing Reliability
Cost-conscious buyers can save by choosing a standard OEM pump, performing minor prep work, and avoiding unnecessary upgrades. Request price quotes that separate parts and labor, compare regional rates, and bundle diagnostic with the replacement.
Assumptions: single-visit repair, no remodel work, standard hoses retained.
Regional Price Variations for Frigidaire Drain Pumps
Prices vary across regions due to labor competition and material availability. In the Midwest, a typical replacement might land near the lower end of the ranges, while coastal markets often see higher labor and service fees. Regional deltas can reach 15-25% versus national averages.
Assumptions: urban vs. rural service mix affects travel time and minimum charges.
Labor Time, Crew Size, and Scheduling for a Drain Pump Swap
Most jobs require one technician for 1-2 hours, with additional time if cabinet removal is needed. If a second technician is required, expect a proportional increase in labor cost. Typical labor rate bands: $60-$125 per hour depending on market.
Assumptions: standard single-site visit, no expedited service surcharge.
Repair vs Replacement: When Frigidaire Drain Pump Is the Right Call
For older units with multiple failing components, replacing the entire pump module can be more cost-effective than patch repairs. If a new pump extends appliance life by several years, the price per year may be favorable. Repair cost often ranges $60-$140; replacement can push totals to $120-$250 or more.
Assumptions: common failures limited to the drain pump rather than control boards or motors.