Gas cooker installation typically costs $150-$600 when an existing, safe gas connection is in place; adding or extending a gas line can bring the project to $500-$1,500 or more. The final price depends mainly on the gas-line work, local labor rates, appliance type, removal needs, and permits.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Basic replacement installation | $150 | $300 | $600 | Existing connection and standard access |
| New gas line and installation | $500 | $900 | $1,500+ | Longer runs or difficult access cost more |
| Cooker removal and disposal | $40 | $90 | $180 | May be included in an installation package |
| Gas-line work | $20 | $35 | $75 | Approximate price per linear foot; minimum charges may apply |
What a standard gas cooker installation costs
For a like-for-like replacement, expect to pay about $150-$600, with many straightforward jobs landing near $300. This assumes a freestanding cooker, a compliant gas shutoff and connector, a usable outlet if the model needs electricity, and no cabinet changes. A slide-in or dual-fuel model can take longer to position and connect.
When a home has no suitable gas line, the combined installation and line work commonly totals $500-$1,500. A difficult route through finished walls, multiple floors, or a long distance from the gas supply can exceed that range. The lowest quote generally assumes an existing connection that passes inspection. Assumptions: standard residential cooker, normal access, typical U.S. labor rates, no major code corrections.
How the gas connection and labor shape the quote
Quotes usually combine the technician’s labor with the connector, fittings, testing, and any gas-line changes. Installation labor often costs $75-$150 per hour, though contractors may charge a fixed job minimum instead. A basic replacement can take 1-2 hours; line routing and repairs can add several hours.
| Quote component | Low | Average | High | What it covers |
|---|---|---|---|---|
| Labor | $100 | $200 | $450 | Connection, leveling, leak test, and setup |
| Connector and fittings | $25 | $55 | $120 | Approved flexible connector and shutoff fittings |
| Gas-line extension | $100 | $350 | $900 | Roughly 5-20 feet, depending on route |
| Permit or inspection | $0 | $75 | $250 | Required in some jurisdictions |
| Removal and disposal | $40 | $90 | $180 | Haul-away of the old cooker |
Ask whether the quote includes the leak test, connector, permit, and disposal. A $100 service minimum may apply even if connection work takes less than an hour.
Which gas-line length and cooker type raise the price?
Line distance and access are major cost drivers. A short, exposed extension of 5-10 linear feet may add roughly $100-$350, while a 20-foot route through walls or cabinets can cost $400-$900 or more after opening and patching are considered. Some installers price by the foot; others quote the whole job.
Cooker specifications matter too. A standard freestanding gas range is usually simpler than a heavy professional-style unit or a dual-fuel cooker that needs both gas and a correctly rated electrical circuit. If the gas supply pipe is undersized for the appliance’s BTU demand, a plumber may need to upgrade the pipe. Confirm the appliance’s gas type and BTU rating before accepting a fixed quote. Converting natural gas to propane, or the reverse, may require an approved conversion kit and additional labor.
How to lower the price without skipping safety checks
Keep the appliance in the same location when possible, and provide clear access to the shutoff valve and connection. Share the cooker’s model number and photos of the gas outlet with the installer before the visit; this can help identify a missing connector, incompatible supply, or electrical requirement before a service minimum is charged.
Compare at least two itemized quotes for the same scope. Check whether each includes parts, leak testing, disposal, and permit fees rather than comparing only the labor line. Do not reuse a damaged or unapproved connector to save a small amount. Bundling cooker installation with other scheduled gas-appliance work may reduce separate trip charges, but the contractor should still test each connection.
How long installation takes and what labor includes
A straightforward replacement generally takes 1-2 hours, including positioning, connection, leveling, and a leak check. A new gas line can require 3-8 hours or more, depending on the route, access, pipe size, and whether walls or cabinets need to be opened. Multiple trades or an inspection can extend the overall schedule beyond the time spent at the cooker.
Labor rates vary by city, licensing requirements, and whether the provider is a plumber, gas fitter, or appliance installer authorized to make the connection. Some appliance retailers offer installation packages, but exclusions can include line extensions, shutoff-valve replacement, stairs, and removal. Get the completion tasks and exclusions in writing.
Why gas cooker installation prices differ by region
Urban markets with higher wages and stricter licensing can run about 15%-30% above a typical national quote. Rural areas may have lower hourly rates but higher travel fees or fewer contractors, while older homes in dense cities can require more time to reach and update gas piping. Permit fees also differ by city and county.
For budgeting, a simple replacement may be around $200-$450 in a lower-cost market and $300-$650 in a high-cost metro. These are planning ranges, not fixed regional tariffs; access and existing pipe condition can outweigh location. Request a local, site-specific quote rather than relying on a national average alone.
What removal, repairs, and extra charges add
Old-appliance haul-away usually adds $40-$180 if it is not included. A new shutoff valve can add roughly $75-$250, while replacing or rerouting a gas line may add $150-$900 or more. Wall or cabinet repairs after concealed piping work are often quoted separately, as are electrical outlet changes for cookers that need power.
Some companies charge $50-$150 for a diagnostic or canceled-visit fee if the connection is unsafe or the appliance is not ready. Emergency or after-hours work can cost 25%-100% more than scheduled service. Ask about minimum charges and stop-work fees before booking. A gas leak or damaged valve should be handled by a qualified professional, not postponed to preserve the original estimate.
When permits and gas-supply upgrades affect the total
Replacing a cooker on an existing, compliant connection may not require a permit, but rules differ locally. New piping, relocation, or a significant supply upgrade can trigger a permit and inspection, commonly adding $50-$250 in fees. The installer should confirm local requirements and identify who arranges the inspection.
Older homes may need a new shutoff, corrected pipe sizing, or other code work before the cooker can be connected. Those corrections are separate from a basic appliance hookup and can push the total beyond $1,500 when access is difficult. Separate required safety work from optional upgrades in the written estimate. Never use the cooker until the connection has been checked for leaks and the appliance is operating correctly.