A gas oven typically costs $600-$2,500 for the appliance, or about $850-$3,700 installed when delivery, hookup, and basic labor are included. This gas oven cost calculator estimate depends mainly on whether the purchase is a freestanding range or wall oven, plus fuel-line access, venting, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Freestanding gas range | $600 | $1,100 | $2,500 | 30-inch basic to premium models |
| Gas wall oven | $1,300 | $2,400 | $4,500 | Appliance only; cabinet fit affects labor |
| Basic installation | $150 | $300 | $600 | Existing compliant gas connection |
| Typical installed range total | $850 | $1,500 | $3,700 | Before major line or cabinet work |
Gas oven prices by range and wall-oven type
For a standard 30-inch freestanding gas range, shoppers generally pay $600-$1,500 for a basic or midrange model and $1,500-$2,500 for a premium model with convection, a larger oven, or upgraded controls. A 24-inch compact range may cost $500-$1,200, while a 36-inch professional-style unit can reach $2,000-$6,000 or more.
Gas wall ovens usually cost more because of their built-in design and narrower product selection. Expect $1,300-$3,000 for many single ovens and $2,500-$5,500 for premium or double-oven configurations, excluding cabinet changes. A standard freestanding range with an existing gas hookup is the lowest-cost common replacement.
Assumptions: U.S. midmarket appliance pricing, standard 30-inch range, no cabinet modification, and an existing gas shutoff.
What delivery, hookup, and removal add to the quote
Installation prices vary with the work included. A simple swap may take about 1-2 hours; a wall oven or difficult access can require 3-5 hours. Appliance installers commonly charge $75-$150 per hour, or a $150-$350 flat fee for a basic range connection. Licensed plumbing or gas work may be billed separately.
| Quote item | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Basic labor and connection | $150 | $300 | $600 | Set appliance and connect to existing line |
| Delivery and haul-away | $50 | $100 | $200 | Local delivery and old unit removal |
| Gas connector and valve parts | $25 | $75 | $150 | Approved connector or shutoff replacement |
| Wall oven fit adjustment | $200 | $500 | $1,200 | Trim, cabinet opening, or electrical adjustment |
Some retailers bundle basic delivery and installation, but the bundle may exclude a new gas valve, stairs, tight access, or disposal. Confirm the written quote lists connection testing and removal separately. A low advertised installation fee is not necessarily the full hookup price.
How BTU output, oven width, and gas lines change cost
Capacity and fit can shift both the appliance price and the installation estimate. A typical 30-inch range may have burners rated around 5,000-18,000 BTU; high-output burners above 20,000 BTU or a 36-inch professional-style unit often add $500-$2,000 to the appliance price. Confirm that the kitchen has adequate clearance and that the chosen model matches the available opening.
An existing 1/2-inch gas line in good condition may support a straightforward replacement, subject to local code and appliance requirements. If the line is undersized, damaged, or more than 10-20 feet from the appliance, extending or replacing it can add roughly $250-$900. A new branch line or difficult route through finished walls can cost $500-$1,500 or more.
Wall ovens bring a separate fit risk: a cabinet opening that is off by even an inch may require carpentry, while moving electrical service or modifying cabinetry can add $300-$1,200. Measure the cutout and verify the gas connection before ordering, especially for built-in models.
Can a gas range repair cost less than replacement?
Repair is often worth pricing when the range is under 10 years old and the cabinet, burners, and controls remain sound. A diagnostic visit typically costs $75-$150, often credited toward the repair. Igniter replacement may run $150-$350, while a thermostat, control board, or burner repair can total $200-$600 including labor.
Replacement becomes more compelling when several parts fail, parts are unavailable, or the repair estimate exceeds about half the cost of a comparable new range. A $400 repair on a basic unit may not make financial sense if a new $800-$1,000 model includes delivery and a warranty. Compare the complete repair bill with the installed replacement total, not appliance prices alone.
Why gas oven installation rates vary by region
Labor and permit costs tend to be higher in major coastal cities and dense metro areas than in many rural markets. As a planning adjustment, expect urban quotes to run about 10%-25% above a national midrange estimate, while some rural areas may be 5%-15% lower; travel distance and contractor availability can erase that gap.
In states or cities with stricter gas-appliance rules, a permit or inspection may add $50-$250. Requirements differ by jurisdiction, and not every like-for-like replacement needs a permit. Ask the installer whether the quote includes code checks, inspection scheduling, and any required shutoff or vent changes. Local rules and access often matter more than the ZIP code alone.
Three gas oven quotes for common kitchen projects
A basic 30-inch range replacement could include a $900 appliance, $225 labor for 1.5 hours at $150 per hour, $65 for a connector, and $90 for delivery and removal, for a total near $1,280 before tax.
A midrange convection range with a new valve might include a $1,600 appliance, $350 labor for 2.5 hours at $140 per hour, $120 in parts, and $125 delivery, totaling about $2,195 before tax. A built-in wall oven replacement could run $2,400 for the oven, $600 for 4 hours of installation, $400 for cabinet adjustments, and $150 delivery, or roughly $3,550 before tax.
These examples assume normal access and no major gas-line relocation; unusual conditions can raise the final bill.
Ways to trim the gas oven budget without cutting safety
Keeping the same appliance type and width avoids cabinet work and reduces the chance of moving a gas line. Compare at least three itemized quotes, checking whether each includes delivery, old-unit removal, connector replacement, taxes, and testing. Ask whether a retailer’s installation package covers the exact site conditions rather than relying on a basic advertised rate.
Midrange models often deliver useful features without the price premium for commercial styling or specialty finishes. Schedule during slower appliance seasons if delivery dates are flexible, and remove loose items or clear the route before the crew arrives. Do not reuse a worn connector or skip a required permit to save money; gas connections should be installed and leak-tested according to local code. Save through a simpler model and a like-for-like fit, not by omitting required gas work.